Unilock Construction in Coral Springs, FL

Unilock Construction in Coral Springs, CA | Barrett & Sons Construction

We provide independent Unilock in Pompano Beach paver installation and repair across Coral Springs. The difference here comes down to the double approval you won’t see mentioned on a generic Unilock dealership page: your HOA architectural review plus the city’s separate drainage review, both of which we’ve been navigating for over a decade. Tom Barrett and his sons run the crews, every permit gets pulled, and every price change arrives in writing before a single paver moves. Call (877) 610-1318 for a free estimate.

Call (877) 610-1318

Why Coral Springs Residents Choose Us for Unilock Service

We’ve been repairing and replacing Unilock paver systems across Coral Springs’ deed-restricted subdivisions for over a decade. That includes trenching jobs that have to clear HOA architectural review delays and high water tables at the same time. We know which Unilock products hold up to western Broward’s wet-dry cycles and which need full-depth replacement after root heave or a sunken base. Tom Barrett grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough hours in the field to know that the job never lies. That’s the standard our crews work to here. We’re an independent Unilock service provider, not manufacturer-affiliated or authorized. What that means for you is simple: our recommendation is based on what works in Coral Springs, not on what a franchise says we have to push.

Common Unilock Construction Problems We Solve in Coral Springs

• Edge spalling and corner chipping on Brussels Block driveways. We see this where cars turn sharply over a sand base that has washed thin along the driveway edge. Coral Springs’ rainy season accelerates the base loss, and once the sand goes, the paver edge cracks under tire pressure.
• Settling and lippage on Mattoni pool decks. Standing groundwater from the city’s high water table compromises underground drainage pipes, and when those pipes shift, the pavers above them drop. We pull the affected area, repair the line, recompact the base, and reset the pattern.
• Efflorescence blooming across Richcliff patios. Coral Springs’ high ambient humidity after long rainy seasons pulls minerals up through the paver face. It’s not structural damage, but it looks bad and it won’t go away on its own.
• Root heave from mature oak and ficus trees. Older west-side subdivisions have trees planted in the 1970s that are now pushing 50 years old. Their roots lift Thornbury walkways in sections, and patching one paver at a time is a waste of your money if the root is still active.
• Sunken bases from irrigation leaks. A small leak under a paver surface does as much damage as a storm. We find the leak, fix it, then recompact and reset rather than throwing new pavers on top of a failing base.

Unilock Service in Coral Springs: What Local Conditions Mean for Your Equipment

Here’s something you won’t read on a generic Unilock page: Coral Springs requires a separate pond and drainage review by the city’s Public Works Department before any paver project that changes site grade. That’s because rain runoff flows into the city’s engineered canal and lake system rather than municipal storm drains. In nearby Margate, that review is folded into a single permit. Here it can add two weeks to a paver timeline. If your contractor doesn’t know this, you’ll be sitting with a torn-up driveway and no permit to finish the job. We factor that review into every bid timeline before we ever show up with a shovel. The other piece is the high water table. A paver base spec’d for a dry inland lot fails early in Coral Springs. We build thicker aggregate bases here, with proper compaction lifts and drainage fall, because the water is never far below the surface.

Unilock Models & Products We Service in Coral Springs

We work with Unilock Brussels Block, Mattoni, Thornbury, and Richcliff, and we’ve seen how each performs through Coral Springs’ wet-dry cycles. For color-matched patch repairs, we use genuine Unilock pavers, never mismatched big-box substitutes. For full replacements, we often recommend current Unilock lines with better base-stabilization characteristics than the originals installed 20 or 30 years ago. We keep common Unilock edge units and bedding sand stocked locally so a repair doesn’t stall while parts ship cross-country. Our Unilock sales & service experience spans the full product line, and we’ll tell you honestly when a repair makes sense and when full replacement is cheaper over the long run.

Unilock Service Pricing in Coral Springs

FAQs - Unilock Construction in Coral Springs

How does Coral Springs’ high water table affect a Unilock paver base, and do I need a different base than a dry inland lot? Yes, you need a thicker aggregate base with proper compaction lifts, because Coral Springs sits on former Everglades flatland where groundwater sits close to the surface year-round. A thin base that works on a dry inland lot washes out here. We build for the water table from day one.

My HOA says I need architectural review before a new Unilock driveway - how long does that actually take in Coral Springs? Plan on 30 to 60 days for the HOA architectural review committee sign-off, then add the city’s separate pond and drainage review, which can run another two weeks. Most of the Coral Springs HOAs require this before a Broward County permit can even be pulled. We build that timeline into your bid from the start. Call (877) 610-1318 and we’ll walk you through it.

Can you repair just the sunken edge of my Unilock Mattoni pool deck, or do I need to redo the whole area? If the sunken edge is the only affected section and the base underneath is intact, we can pull and reset just that area, and we also offer Bathroom Remodeling in Coral Springs. If the groundwater has compromised the drainage pipe below, we’ll repair the line, recompact the base, and reset the pavers over the repaired section. You don’t pay for a full deck replacement unless the base has failed broadly. Call (877) 610-1318 and we’ll look at it for free.

Are newer Unilock products like Richcliff better for Coral Springs’ wet season than the older Brussels Block on my current driveway? Richcliff has what we’d call a tighter stone-like surface and good resistance to efflorescence blooming, which is a real problem in Coral Springs’ high humidity. Brussels Block is a fine paver, but on a failing base it doesn’t matter which product sits on top. We’ll tell you if your money is better spent on full-depth recompaction or on a newer line. Call (877) 610-1318 for an honest answer.

Does Barrett & Sons use the same sand for Unilock paver joints in Coral Springs as we would see up north? No. We use polymeric sand spec’d for high-moisture, high-settlement conditions. The sand you’d use on a dry northern lot won’t hold up to Coral Springs’ wet-dry cycling and will wash out of the joints within a season or two. Call (877) 610-1318 and we’ll spec it correctly.

Service Areas Near Coral Springs

We serve Coral Springs and the surrounding communities, including Miramar, Fort Myers, and the broader Coral Springs service area. For clients west of the city, see Unilock service in Miramar. For that stretch out toward the Gulf, see Unilock service in Fort Myers.

Book Your Unilock Service in Coral Springs Today

Call (877) 610-1318 for a free, written estimate. We’ll scope the job, factor the HOA and drainage reviews into your timeline, and price it in writing before any work begins. We’ll do it right the first time, or we’ll come back and make it right.

Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Coral Springs since 1998.