Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterPGT Construction in Coral Springs, CA | Barrett & Sons Construction
We provide independent PGT construction service across Coral Springs, and the one thing that makes our work here different is that we know the dual track you’re up against: HOA architectural review plus Broward County permitting. We repair, replace, and structurally integrate PGT windows and doors in Coral Springs’ deed-restricted CBS homes every week, and we’re not a dealer pushing one product line. Call (877) 610-1318 for a free estimate.
Why Coral Springs Residents Choose Us for PGT Service
Tom Barrett grew up in the San Fernando Valley learning the trade at Los Angeles Trade-Technical College, and for the better part of two decades he’s been building and remodeling homes across South Florida. Barrett & Sons Construction was founded in 1998, and Tom’s sons run the crews. When you call about a PGT window that’s fogged or a sliding door that binds, you’re talking to the people who’ll show up at your door, not a call center.
We work on PGT product families daily here: WinGuard impact units, Architectural Series, PremierVue, and Eze-Breeze porch enclosures. We know how each one behaves under Broward County’s post-Andrew wind and water loads. And because we’re independent, not manufacturer-authorized and not a factory shop, we source OEM PGT parts through established regional distributors when impact ratings matter, and we’ll tell you plainly when a quality aftermarket match makes more sense for cosmetic trim. See our PGT sales & service overview for the full picture of what we cover.
Every job gets permits pulled and inspections signed where eligible. Every price change arrives as a written change order before work proceeds. And every completed job carries our 90-Day Done Right Promise in writing. Tom publishes his name, address, and license number. Look it up. Anyone on your street can tell you he answers his own phone.
Common PGT Construction Problems We Solve in Coral Springs
- Roller sag or binding on PGT sliding glass doors. Older Coral Springs CBS homes on the west side of town often have buck frames that settled or cracked at the stucco line over 30 to 55 years. The track goes slightly out of plane, the rollers fight it, and the door starts to drag. We fix the frame, replace the rollers with OEM PGT stainless sets, and reset the door so it glides like it should.
- IGU seal failure, the permanent interior fog. Early-2000s PGT WinGuard impact units on western-facing elevations take full afternoon sun here, and that thermal cycling kills insulating glass seals. You can’t wipe the fog off because it’s between the panes. We replace the sash or full unit, not just the glass, because a failed IGU means the impact laminate’s seal integrity has already been compromised.
- Stripped or corroded hinge screws on PGT casement and awning windows. Coral Springs sits on former Everglades flatland with a seasonally high water table. Add sprinkler overspray hitting the hardware and you get a perfect recipe for hinge screws that wallow out or corrode solid. We re-tap the openings, upgrade to stainless hardware, and reset the sash geometry.
- Degraded wool pile and weatherstrip on PGT single-hung sashes. Pre-1994 CBS homes here often run oversized AC returns that create negative interior pressure, pulling dust and humidity straight into the track. That grit grinds the wool pile down to nothing, and suddenly you’re feeling a draft through a window that’s supposed to be hurricane-rated. We strip and replace the weather seal, then re-test the sash for square.
- Storm-season emergency board-ups on broken PGT impact units. When a branch or flying debris cracks a laminated PGT panel during a Coral Springs hurricane warning, permit offices are closed and the HOA won’t answer the phone. We board up to Broward wind-load standards, document it, and get the proper permit pulled as soon as offices reopen. No corner-cutting, even at 11 p.m.
PGT Service in Coral Springs: What Local Conditions Mean for Your Equipment
Coral Springs was master-planned and built out almost entirely between the late 1960s and mid-1990s by Coral Ridge Properties as a deed-restricted community. That means the vast majority of our CBS single-family homes predate Florida’s post-Hurricane Andrew building code overhaul that took effect in 2002. So you have a city full of original aluminum single-pane windows, pre-code roof deck nailing, and exterior openings that were never designed for today’s wind and water loads. What’s more, nearly every neighborhood still operates under the original Coral Ridge Properties deed restrictions, which require HOA architectural review committee sign-off before any exterior opening changes. An impact-window retrofit that starts with a PGT quote can sit 30 to 60 days in ARC review before Broward County even accepts the permit application. We write that delay into every PGT job timeline, and we pull shop drawings and NOA submittals up front so the ARC packet is complete on day one. In a city where a neighbor in Maplewood waits three weeks for review and a neighbor in Kensington waits six, planning around the HOA is half the job.
PGT Models & Products We Service in Coral Springs
We service the full PGT lineup you’ll find in Coral Springs homes: WinGuard impact windows and doors, Architectural Series for elevated design pressure, PremierVue multi-slide systems, and Eze-Breeze porch and lanai enclosures. For safety-critical components like laminated glass units, multi-point lock sets, and stainless rollers, we source OEM PGT parts through established regional distributors. Aftermarket substitutions void impact ratings, and we won’t do it on a window that’s supposed to protect your family. For cosmetic trim, screens, and non-structural hardware, we use quality aftermarket matches when you want to keep the cost down. We’ll always tell you when a unit is too far gone to hold its design pressure and recommend full sash or frame replacement. Our PGT sales & service page breaks down what we cover in more detail.
PGT Service Pricing in Coral Springs
Here’s what PGT work in Coral Springs typically runs, based on the scope we see across the city:
| Service | Price Range |
|---|---|
| PGT Impact Window Installation | $8,000-$25,000 |
| PGT Window Replacement | $4,500-$15,000 |
| Emergency & Storm Damage | $400-$1,800 |
What drives the cost in Coral Springs specifically? The HOA ARC review timeline can stretch a job 30 to 60 days before the permit even gets filed, and any exterior opening work on a pre-2002 CBS home often means structural upgrades to the rough opening. The number of openings, the PGT product family, and whether we’re doing a like-for-like sash swap or full frame-and-buck replacement all move the number. Our free estimate is a written line-item quote, not a phone number. Call (877) 610-1318 and we’ll walk the house with you.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Construction in Coral Springs
Yes, in nearly every Coral Springs subdivision, because the original Coral Ridge Properties deed restrictions still govern exterior appearance changes. Your HOA’s architectural review committee must sign off before Broward County will even accept the permit application. We prepare the ARC packet with shop drawings and NOA submittals up front so the review goes through on the first pass. Call (877) 610-1318 and we’ll tell you exactly what your HOA needs.
For a broken IGU seal, you need a new sash or full unit, not just a glass replacement. The laminated impact glass and the seal are one assembly, and once the seal fails the design pressure rating is already compromised. We source OEM PGT sashes for exactly this reason. If the frame is sound, a sash swap is usually the smartest fix.
Not automatically. Broward County accepts Miami-Dade NOAs in most cases, but your specific PGT product’s Notice of Acceptance must cover the exact model, size, and design pressure rating for the opening you’re working on. We pull the NOA up front and include it with the permit package. If the NOA doesn’t cover what you’ve got, we’ll tell you before you spend a dollar.
You board up first, permit second. Emergency storm protection is exempt from the usual permitting timeline when a named storm is approaching, and we install board-ups to Broward wind-load standards on the spot. We photograph and document everything, then file the proper permit as soon as offices reopen. Nobody’s coming after you for protecting your house in a storm, but the unscrupulous contractor who skips the follow-up permit is the one you’ll regret hiring. Call (877) 610-1318 any hour if you need us.
That depends on the frame and the rough opening. If the frame is square, the buck hasn’t cracked at the stucco line, and the design pressure still holds, a sash replacement makes sense. But in pre-Andrew Coral Springs CBS homes we often find the original rough opening was never flashed or strapped to today’s code, and a patch job just postpones a bigger problem. We’ll inspect the opening and give you a straight answer on repair versus replacement. Call (877) 610-1318 for a free assessment.
Service Areas Near Coral Springs
We serve Coral Springs and the surrounding communities across Broward County. If you’re in Margate to the east, Coconut Creek to the southeast, Parkland to the north, or Tamarac to the south, we cover those too. We also handle PGT work for clients in PGT service in Miramar and PGT service in Fort Myers. Our full Coral Springs service area page lists every ZIP we cover, including 33075.
Book Your PGT Service in Coral Springs Today
If your PGT windows or doors need attention in Coral Springs, call (877) 610-1318 and ask for a free estimate. Tom or one of his sons answers the phone. We’ll schedule a walk-through, put the number in writing, and start the HOA paperwork the same week. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Coral Springs since 1998.