Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Kitchen Remodeling Across Corinth
A full kitchen remodel in Corinth, TX typically costs $14,000 to $45,000, and most projects take 4 to 8 weeks depending on whether you’re moving walls or keeping the footprint. We’re Barrett & Sons Construction, and we’ve been remodeling kitchens for Denton County homeowners since 1998. Tom Barrett runs the crews with his sons, and every quote we write comes with permits pulled, brands you can look up, and a 90-Day Done Right Promise on paper. Call (877) 610-1318 for a free estimate. A live person answers.
Corinth isn’t just another stop on our route. The housing stock here was built fast in the 1990s and early 2000s, and most kitchens from that era weren’t framed for what homeowners want today: open sightlines, islands, and more window. That matters, because Corinth sits in a wind zone with real structural requirements, and a lot of what we do is quietly make those older walls safe before the cabinets ever go in. When you’re ready for broader exterior work, we also handle Roofing - Corinth projects with the same structural rigor.
Why Barrett & Sons Construction Is Corinth’s Preferred Kitchen Remodeling Company
We’re not a franchise. Tom Barrett’s name, address, and license number are published, and if you call the number on this page, you’ll reach a person, not an out-of-state call center. Homeowners in Corinth have told us the same story for 29 years: a national company quoted one number over the phone and a different number at the front door. We handle pricing differently. Every scope, every allowance, every change order is in writing before work starts. If a change isn’t on paper, it doesn’t happen.
We also carry the local context that keeps a Corinth kitchen project moving. The homes off 2181, around Corinth Parkway, and up toward the Shady Shores border share a construction DNA: brick veneer over wood frame, slab-on-grade, built between roughly 1990 and 2005. We know what’s behind those walls. When a homeowner in Hunter’s Ridge asks us to open a load-bearing wall, we already know the original header probably won’t meet today’s wind-load span table. That’s not a guess; it’s what our crews see on nearly every job in the 76210 zip code.
Our 90-Day Done Right Promise is written into every contract. One call brings Tom back, no argument. That promise matters even more in Corinth, where wind exposure and clay soil can test a remodel within the first season.
Our Kitchen Remodeling Services in Corinth
We handle the full range of Kitchen Remodeling work, from small partial remodels to complete design-and-build projects. Here’s what we do most often in Corinth:
Kitchen Design & Layout
Before we touch a wall, we look at how you actually use the kitchen. In Corinth’s 1990s tract homes, the original kitchens were often closed off with a peninsula and a standard U-shape. Today’s homeowners usually want an island, better sightlines, and a real work triangle. We draw the layout, spec the cabinets and counters, and then check the structural reality. Some plans survive first contact with the wall studs. Some don’t, and we’ll tell you why before we write the change order, not after.
Full Kitchen Remodeling, Including Load-Bearing Wall Removal
What makes this different in Corinth is the wind zone. Most of what we do in a full remodel is visible: Kitchen Remodeling that turns a closed 2001 kitchen into an open concept. But before the opening can be framed, Corinth’s building inspection applies the same wind-load anchorage requirements as new construction. That means hold-downs, engineered connectors, and a properly sized header, often where the original house had none. We handle that as part of the full remodel scope, documented and inspected. It’s not the part you see in the renderings, but it’s the part that keeps the wall standing when the wind comes across the lake country.
Cabinets & Countertops
We install KraftMaid cabinets and Cambria quartz, along with granite and solid-surface counters. For a standard cabinet installation in Corinth, plan on $4,000 to $13,000. Countertops run $2,000 to $6,500. We measure precisely, and we check the slab before we set a heavy island on it. In Corinth, where 1990s slabs were often poured thinner than today’s standard and the Blackland Prairie clay beneath has been moving for three decades, a granite island can accelerate settlement that’s already active. We look for hidden cracks and depressions first, because the last thing you want is a beautiful stone surface cracking along a slab seam six months in.
Backsplash, Tile & Flooring
Backsplash installation in Corinth runs $800 to $2,500 depending on material and square footage. Tile and flooring scope varies with what’s underneath. Older Denton County kitchens often have original vinyl or thin ceramic over a slab that has since developed hairline cracks. We check for moisture and flatness before we lay anything, because tile grout lines will telegraph slab movement you didn’t know you had.
Small & Partial Kitchen Remodels
A small kitchen remodel in Corinth, where you’re not moving walls but replacing counters, flooring, or a cabinet run, typically runs $9,000 to $20,000. These projects move faster, and we price them with the same written-change-order discipline as our full remodels. No surprises means no surprises, even on the small jobs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We carry brand names you can look up: KraftMaid and Cambria in kitchens, with Simonton windows when a kitchen remodel grows an exterior opening. For dedicated window replacements, see our full Corinth Windows & Doors service. You’ll never find mystery-brand materials off the back of our truck. In Corinth, where storm and wind performance are part of the building conversation, the brand on the window tag matters. Simonton and PGT both carry Miami-Dade and Texas Department of Insurance impact designations, and when we enlarge a window opening over a new kitchen sink, we size the frame and the glazing to Corinth’s wind zone, not just to what looked good in the showroom.
Common Kitchen Remodeling Problems We See in Corinth Homes
- Undersized original headers. The 1990s tract stock in Corinth was framed to a lower span allowance. Open a wall and the existing header often fails today’s wind-load table. Fixing it before rough-in inspection saves you a failed inspection.
- Slab settlement under heavy islands. Blackland Prairie clay expands and contracts with rain and drought. A quartz island adds several hundred pounds at a single point on a slab many Corinth homes poured thin. We check for settlement cracks before we anchor anything.
- Compacted drainage grading. Original 1990s drainage in older Corinth neighborhoods has settled over 25 years, so water ponds at the slab edge, feeding exactly the movement we just described. A kitchen remodel is a smart time to fix that grading at the same wall.
- Unpermitted earlier work. We find a fair amount of prior remodels in Corinth that were done without a permit. It’s not always visible until we open a wall. If there was a structural change, we flag it and write the correction into the scope. Otherwise your insurance claim later has a hole in it.
Pricing for Kitchen Remodeling in Corinth, TX
Here are the line items we quote most often in Corinth. These are real ranges for this market, not national averages:
| Service | Typical Range in Corinth |
|---|---|
| Full Kitchen Remodel | $14,000 - $45,000 |
| Small Kitchen Remodel | $9,000 - $20,000 |
| Backsplash Installation | $800 - $2,500 |
| Kitchen Island Installation | $3,000 - $10,000 |
What pushes a Corinth kitchen to the top of that range? Opening a load-bearing wall and bringing the new framing to current wind-load code. What pushes it lower? Keeping the footprint, reusing plumbing locations, and doing a cosmetic refresh with new surfaces and hardware. Either way, you’ll see every number in writing before we start. Call (877) 610-1318 and ask for a free estimate. Tom or one of his sons will walk the space and line out the quote. No change order ever hits your bill without your signature first.
And for the record: you won’t see a trip charge if you’re inside the county, and we offer a standing 10% discount for seniors and veterans, plus $40 off any repair over $200. Ask about the free second opinion on any written estimate you’ve already received. We’ll tell you straight if the other guy’s number is low because he’s skipping the engineering.
We Also Serve Cities Near Corinth
Our crews work throughout Denton County, including Kitchen Remodeling in Corinth as well as Lake Dallas, Flower Mound, Highland Village, and Denton. If you’re just outside the city line, call anyway. We coordinate scheduling from our Dallas-Fort Worth office, and the same crew that works in Corinth will cross the bridge for your job if the scope fits.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Kitchen Remodeling in Corinth
Yes, if the sink drains through the slab and the wall you’re modifying is an exterior or load-bearing wall, Corinth’s building inspection will apply wind-load anchorage to any opened framing. The plumbing relocation itself is straightforward, but the wall patch and any new opening still have to meet current code. Call (877) 610-1318 and we’ll tell you whether your specific sink move triggers it. Estimates are free.
It helps, sometimes significantly. If your original 1990s home never had a wind rating on file, a documented compliance letter from a permitted inspection gives your insurer something to rate the house against. In Hunter’s Ridge, we completed a kitchen remodel that included engineered hold-downs and a new header on a pass-through, and the homeowner told us the renewal came through after we sent the inspection packet. It’s real documentation, and it matters in a wind zone.
Because most Corinth homes were built between 1990 and 2005, when the city’s building stock came up fast. The original framing often lacks hold-downs and the header spans don’t meet today’s wind-load tables. So almost every wall-opening quote in Corinth has a provisional change order line for engineered connectors and a resized header, contingent on what the rough-in inspection reveals. We write it into the quote before you sign, not after the wall is open.
Quartz counters, backsplash, and cabinet refacing generally don’t require a permit if you’re not changing structure, plumbing, or electrical. But the moment you touch a wall, move a sink, or add a circuit, the permit is not optional in Corinth. We’ve seen insurance claims denied because wind damage to a remodeled wall couldn’t be tied to a compliant inspection sign-off. Tom says the permit inspector works for you, not for us. That’s why he likes him.
The window unit must carry the design pressure rating required by Corinth’s adopted wind code for the exposure zone of your elevation. That often means an impact-rated or high-DP window, not a standard replacement unit. Brands like Simonton and PGT manufacture windows with documented Texas design pressure ratings, and we spec them by the elevation facing the weather, not by what’s cheapest on the shelf. Call (877) 610-1318 for a free estimate and we’ll pull the exact rating for your wall.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Corinth and Denton County since 1998.