Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Bathroom Remodeling Across Corinth
A full bathroom remodel in Corinth, TX typically lands between $9,000 and $28,000, and most of the homes we work in were built between 1995 and 2005, which brings a specific set of plumbing, framing, and slab questions into every project. If you live off Swisher Road, near Corinth Parkway, or in neighborhoods around Fairview, you’re probably looking at a builder-grade bath that hasn’t been touched since the day it was drywalled. We’re Barrett & Sons Construction, and we’ve spent nearly three decades remodeling bathrooms in homes just like yours. Call (877) 610-1318 and we’ll walk your bathroom with you, tape measure in hand, and give you a written scope with real dollar figures before you commit to anything.
This page is written for Corinth homeowners, not a generic national audience. Keep reading and you’ll learn exactly what your 1990s-to-2000s slab home demands from a bathroom renovation: waterproofing sequence, HOA approval timing, what to replace versus what to keep, and what this work actually costs in Denton County.
Key Takeaways for Corinth Homeowners
- Bathroom remodels in Corinth run $9,000-$28,000 for full gut-and-replace projects; walk-in showers alone land at $4,500-$12,000.
- Your slab matters more than you think. Blackland Prairie clay expansion and contraction moves shower pans, tile, and vanities in ways a pier-and-beam house never has to deal with.
- HOA architectural review is real in Corinth. Master-planned communities like Fairview and Corinthian Estates require written approval before work starts, and skipping it costs you weeks, not days.
- Written change orders protect you. Every scope change on our jobs arrives on paper with a dollar figure before a single nail moves.
Why Barrett & Sons Construction Is Corinth’s Preferred Bathroom Remodeling Company
Tom Barrett started this company in 1998, and his sons run crews across Denton County every week, including Corinth. That matters because the person who shakes your hand at the estimate is the same person who answers the phone when you call about a question three weeks later. We’re not a franchise dispatching strangers from two states away. Homeowners in Corinth have called us after being burned by outfits that quoted one number over the phone and handed them a different invoice at the door. That doesn’t happen on our jobs. Every allowance, every change order, every scope adjustment arrives in writing before the work proceeds.
Corinth customers call us because we know what’s behind their walls. We know that a 1999 master bath in Fairview often hides a shower valve set into a load-bearing wall with no blocking, because we’ve cut into that wall and fixed it. We know the permit process at Corinth City Hall and we know which inspectors want to see flood-plane documentation on a slab bath. Our Bathroom Remodeling team has walked more 1990s tract home bathrooms in this city than any national brand’s call center ever will.
We live in the metro, not a call center. When you call (877) 610-1318, a live person picks up. You’ll get Tom or one of his sons most days. And every contract we write includes the 90-Day Done Right Promise: if something isn’t right, one call brings Tom back, no argument, no runaround.
Our Bathroom Remodeling Services in Corinth
Full Bathroom Remodeling
We gut and rebuild bathrooms in Corinth homes every month, from the Fairview subdivision to streets off Post Oak Drive. A full remodel usually means correcting at least one thing the original builder did in a hurry: improper shower pan slope, vanity cabinets screwed into drywall anchors instead of studs, or floor tile laid without a crack isolation membrane. We fix all of it, pull the permit, and document the corrections for the inspection. Most full baths in Corinth take three to five weeks once demo starts.

Walk-In Showers & Shower Remodeling
Walk-in shower installation in Corinth runs $4,500-$12,000 depending on size, glass, and what we find when we open the wall. We use Schluter waterproofing systems on nearly every shower we build here because Corinth’s wet-dry clay cycles flex the slab, and a rigid mortar bed will crack within a few seasons. A properly built Schluter shower can absorb that movement without shearing tile. If you’re in a home built between 1995 and 2005, this is the single most important decision in your shower project.

Tub-to-Shower Conversion
Converting a tub to a walk-in shower is the most requested bathroom project we do in Corinth, especially in homes where the original tub is a fiberglass drop-in that’s yellowed and creaks. This job runs $3,500-$10,000. The critical part isn’t the pretty glass or the tile pattern; it’s the rough-in plumbing inspection and the waterproofing layer beneath everything else. We pull permits on every conversion. No permit means no inspection, and no inspection means a hidden shower valve could leak into your 1990s subfloor for a decade before you smell it.

Vanities, Tile & Fixtures
A bathroom vanity installation in Corinth typically runs $800-$3,000 including the cabinet and top, and it’s one of the most common first upgrades we do in homes along Corinth Parkway and surrounding streets. Builder-grade vanities from the 1990s and early 2000s are usually particleboard boxes with laminate tops, and after 25 years in a humid Texas bathroom, the bottoms are swollen and the hinges are pulling out. We install real plywood boxes, set them level on floors that haven’t been level since the second wet-dry cycle. Tile and fixture work follows the same rule: properly prepped, properly waterproofed, and documented in writing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We stock and install brands you can look up and verify, not mystery materials off a van. On Corinth bathroom jobs we regularly install Schluter waterproofing systems, Sterling shower bases and wall surrounds, and Grohe and Moen fixtures. When you sign a contract with us, the brand names go on the written scope. If you want Cambria quartz on your vanity, the allowance says Cambria. If we’re using Kohler pans, the line item says Kohler. That’s how we’ve always done it, and it’s why neighbors in Corinth recommend us to neighbors.
Common Bathroom Remodeling Problems We See in Corinth Homes
- Slab movement shearing shower tile. The Blackland Prairie clay under Corinth expands in wet seasons and contracts hard in summer drought. That heave-and-settle cycle flexes the slab, and rigid tile set directly on a slab without a decoupling membrane will shear within two or three seasons. We see this constantly in homes built during the 1990s and 2000s boom, when slabs were thinner and post-tension engineering was minimal.
- Shower pan cracks and hidden leaks. Original builder shower pans in Corinth tract homes were often thin mortar beds with no waterproofing membrane underneath. Once the pan cracks, water travels down into the slab and the subfloor, and by the time you see a stain on the ceiling below, the rot has been progressing for years. We open walls on nearly every full remodel and find exactly this.
- Vanity settlement and crooked cabinets. A vanity installed in 1998 on a slab that has since moved three-eighths of an inch won’t be level anymore. Doors bind, drawers stick, and the countertop pulls away from the backsplash. Leveling a vanity on a moving slab is a skill, and it’s one our crews have learned across hundreds of Corinth bathrooms.
- Builder-grade waterproofing failures. Green board, not cement board. No membrane behind tile. Caulk instead of sealant at the tub flange. These were standard practices in fast-built DFW tract homes through the 1990s and early 2000s, and they fail on a predictable schedule. If your shower hasn’t been touched since the day you closed, it’s probably time to look behind the tile.
Pricing for Bathroom Remodeling in Corinth, TX
We give written, line-item pricing on every Corinth job, and we don’t change the number unless the scope changes in writing first. Here’s what we’re seeing in Corinth right now:
| Project | Price Range in Corinth |
|---|---|
| Walk-In Shower Installation | $4,500-$12,000 |
| Tub-to-Shower Conversion | $3,500-$10,000 |
| Bathroom Remodel (full) | $9,000-$28,000 |
| Small Bathroom Remodel | $5,000-$12,000 |
| Shower Replacement | $3,000-$8,500 |
| Bathroom Vanity Installation | $800-$3,000 |
What moves your number: the size of the bath, whether we’re moving plumbing or keeping the existing layout, the waterproofing system, the fixtures, and what we find when we open the walls. A 1999 master bath in Fairview that needs framing correction and a new valve rough-in will cost more than a powder room refresh. Call (877) 610-1318 and we’ll give you an exact written quote, free, with no trip charge inside Denton County.
How Corinth’s Slab-on-Clay Homes Change a Bathroom Remodel
Here’s the thing a generic bathroom remodeling guide will never tell you: the sequence matters more in Corinth than the style. Because our homes sit on Blackland Prairie expansive clay with thinner slabs and minimal post-tension engineering, the waterproofing and leveling have to happen before the pretty stuff. A homeowner who replaces a cracked tile shower floor without addressing the underlying slab movement will be replacing that tile again within two seasons. We’ve watched it happen, and we’ve also fixed the jobs where someone else did it wrong.
In the Fairview subdivision, our crew converted a 1999 master bath tub to a walk-in shower with a Kohler pan and Schluter waterproofing. Before rough-in, we found the original shower valve was set into a load-bearing wall with no blocking, so we added framing and a change order for the new Moen valve’s rough-in depth. The homeowner’s builder warranty had lapsed, but our permit inspection sign-off documented the corrected slope on the subfloor, and the frameless glass enclosure now sits flush despite the slab’s three-eighths-inch heave over two decades. That’s what local knowledge actually looks like on a work order.
We Also Serve Cities Near Corinth
If you’re not in Corinth proper but you’re close, we regularly work in Corinth and the surrounding Denton County communities, including Lake Dallas, Flower Mound, Highland Village, and Denton. The same pricing, the same written change orders, and the same crew standards apply whether your home is off 35E or deeper into the neighborhoods.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Bathroom Remodeling in Corinth
Yes. If your project changes anything visible from the exterior (like relocating a vent or window) or touches structural elements, most Corinth HOAs in master-planned communities require a 30-day architectural review before work begins. Skipping it can mean a stop-work order and a punch list that can’t close. Interior-only remodels that don’t alter the building envelope generally don’t trigger review, but you should confirm before demo. We help our Corinth customers identify which permits and HOA approvals apply to their specific job before we ever swing a hammer. Call (877) 610-1318 and we’ll walk you through it.
Most builder warranties from the 1990s and 2000s have expired by now (typically 10 years for structural, 1-2 years for interior finishes), but if yours is still active, check the language before work starts. Most warranties don’t cover modifications anyway, but using a licensed contractor who pulls permits and documents the work is your best protection. We can’t speak for every builder’s policy, but we can tell you that our permit inspection sign-offs create a paper trail that any builder would have trouble dismissing. Call (877) 610-1318 and we’ll help you review what you signed.
Because the slab under your house is moving. Corinth sits on Blackland Prairie clay that expands when wet and contracts during drought, and North Texas cycles through both extremes almost every year. If tile is set directly on the slab without a decoupling membrane or crack isolation layer, the slab flex transfers straight through to the tile and it shears. We install Schluter membranes on every tile floor in Corinth for exactly this reason. It’s not an upgrade here; it’s the standard. Call (877) 610-1318 and we’ll explain what your specific slab is doing.
Plan for three to five weeks once demo starts, assuming no major surprises. Permit approval at Corinth City Hall typically takes a few days to two weeks depending on the scope, and HOA review can add up to 30 days if you’re in a master-planned community. The demo and rough-in phase is where most Corinth-specific delays happen, because we’re almost always correcting framing problems, leveling floors, or addressing moisture issues the original builder left behind. We’ll give you a written schedule before work begins, and we update you in writing if anything changes. Call (877) 610-1318 for a project-specific timeline.
Replace them. The vanities installed in Corinth tract homes from 1995 to 2005 are almost always particleboard boxes with laminate tops. After two decades of bathroom humidity, the bottoms are swollen, hinges are pulling out, and the finish is peeling. A new plywood-box vanity with a quartz top runs $800-$3,000 installed in Corinth, and it’s one of the single best value upgrades you can make in a bath that’s already open. If the cabinet box is somehow still solid, you might keep it and just replace the top and hardware, but that’s rare. Call (877) 610-1318 for a look at what’s worth keeping and what’s not.
Contact Barrett & Sons Construction for Your Corinth Bathroom Remodel
We serve Corinth, and we answer our own phone. Call (877) 610-1318 for a free written estimate on your bathroom remodel. No trip charge inside Denton County, no pressure, and a written line-item price before you sign anything. Tom Barrett’s name, address, and license number are published and verifiable. Look us up, then call.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Corinth and Denton County since 1998.







Before
After
Before
After
Before
After