Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Encino
Fence installation in Encino typically runs $3,500 to $9,000 for most residential projects, with aluminum fencing on hillside lots and custom privacy gates landing at the higher end. We’re Barrett & Sons Construction, and we’ve been building and repairing fences across the San Fernando Valley for over 29 years – long enough to know that an Encino fence has to handle more than a wooden stake in the ground. Between the post-1994 Northridge earthquake damage still hiding underground, the clay-heavy soil that shifts with every wet winter, and the wildfire codes that govern hillside parcels near Mulholland Drive, you need a fence built by someone who understands what’s under it. Call (877) 610-1318 and we’ll come take a look.
Why Barrett & Sons Construction Is Encino’s Preferred Fence Installation Company
Tom Barrett started this company in 1998, and his sons run the crews that show up in Encino today. That’s not a line – it’s how we’re built. When you call about a fence on a 1960s ranch home off Ventura Boulevard or a custom estate climbing toward the Santa Monica Mountains, you’re talking to someone who lives in the Valley and knows what the LADBS inspectors are going to flag before they flag it.
Encino homeowners tell us the same thing again and again: they got burned by a company that quoted one price over the phone and presented a different bill at the door. We don’t do that. Every fence project we take on in Encino gets a written scope, written allowances, and a written change order before a single post goes in the ground. If something changes, you see it on paper before you pay for it. Tom publishes his name, his address, and his license number – look it up before you sign anything. No trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Our Fence Installation Services in Encino
Aluminum Fence
Aluminum is the workhorse for Encino hillside lots and luxury rebuilds. It’s light, it doesn’t rust, and – critically – it can be ordered in Class A fire-rated assemblies that pass LADBS wildfire-zone inspection. For parcels pushing toward Mulholland Drive, where ember-resistant construction codes apply, aluminum is often the only fence material that clears inspection without a fight. On flat lots in 91316 and 91436, we install aluminum for pool enclosures, property lines, and decorative front fencing that holds up against the Valley heat without warping.
Privacy Fence
Encino’s teardown-and-rebuild cycle means a lot of single-story ranch homeowners suddenly find themselves staring at a new two-story custom home next door. A six-foot or eight-foot privacy fence is the natural answer, but height and setback rules change depending on your zoning and how close you are to the property line. We pull permits on every eligible job and make sure the final fence meets Encino’s current codes – not just the ones that were in effect when your house was built in 1962.
Fence Gates
A gate is the first thing that fails on an Encino fence. The clay-heavy soil in the Valley flatlands expands and contracts with the seasons, and a gate post set in a cracked, non-compliant footing from the 1994 repair boom will start binding within two years. We set gate posts in engineered footings with rebar, hang the gate on adjustable hinges, and size the hardware for the actual weight of the panel. If you’ve got a sagging gate on a 1970s ranch home, don’t shim it – call us and we’ll tell you honestly whether it needs a footing or just new hardware. Fence gates in Encino typically run $3,000 to $8,000 depending on width, material, and whether we’re matching an existing fence line or building new.
Chain Link Fence
Chain link remains the practical choice for side yards, dog runs, and temporary enclosures during an Encino teardown or remodel. But old chain-link fences put up after the Northridge earthquake were often set in unreinforced concrete – no rebar, no proper depth – and they’ve been shifting ever since. When we replace chain link in Encino, we don’t just pull the old posts and drop new ones in the same holes. We inspect what’s underneath, correct the footing, and set the new line to grade so the fabric stays tight for decades.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
We quote and install fencing materials you can actually look up. For hardscape-adjacent fence projects, we regularly run Fence Installation lines that integrate with pavers and retaining walls supplied by Techo-Bloc and Cambridge Pavers – brands with published specs, not mystery material off a van. When a fence post needs a concrete footing poured in Encino’s expansive clay, we use Quikrete bagged concrete mixed to the right strength for the soil conditions. You’ll see the manufacturer name on your written quote, and you’ll be able to verify it before we order.
Common Fence Installation Problems We See in Encino Homes
- Post-1994 footings that were never properly tied. After Northridge, a lot of fences went back up in a hurry. Contractors poured concrete without rebar and called it done. In Encino’s clay-heavy flatlands, those footings crack and shift with seasonal soil expansion, and gates start binding or panels sag within two years. We routinely dig up 30-year-old footings that were never compliant in the first place.
- Property lines thrown off by the teardown cycle. Encino’s rebuild boom means the house next door might have been demolished and rebuilt with a new foundation inspection that reset the legal property line. If a fence was originally built over a neighbor’s setback by mistake – common after the rushed 1994 repairs – the city can require it to be pulled back before a new build signs off. We check setbacks before we set posts so you don’t pay for a fence that gets torn down later.
- Hillside fences that fail ember-resistance codes. The hillside edges near Mulholland Drive fall into elevated wildfire-risk zones. A wood fence with wood-to-ground contact or non-ignition-resistant details won’t pass current LADBS inspection. Homeowners sometimes pay a contractor to build a new fence, then find out at final inspection that it has to come down. We quote and build to the current code from day one.
- Hidden soft-story or cripple-wall damage along shared lines. If the house next door still has unrepaired Northridge earthquake damage, that movement can undermine a fence’s lateral stability even if the fence itself was built correctly. Before we set posts along a shared property line, we look at what’s happening on the other side. It’s the kind of thing you only catch if you’ve been working in Encino long enough to know what to look for.
Pricing for Fence Installation in Encino, CA
Here’s what you can expect in Encino’s market right now – and what drives the number up or down. The biggest factors are material, linear footage, slope, and whether the footing needs to be replaced rather than reused. Hillside lots, custom gates, and properties in wildfire zones cost more because the code requirements are stricter and the engineering is heavier. If a fence line runs along a property boundary where the neighbor’s post-1994 repair work failed, we may need to pour new footings – and that’s the kind of thing you’ll see in writing before we order materials.
| Service | Typical Encino Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Fence Gates | $3,000 – $8,000 |
| Fence Repair | $1,000 – $4,500 |
These are honest ranges, not teaser numbers. We can’t give you an exact quote over the phone – nobody ethical can without seeing the property line, the slope, and what’s under the old posts. What we can do is come to Encino, measure, inspect, and hand you a written line-item quote. No trip charge inside the county. Call (877) 610-1318 to schedule yours.
We Also Serve Cities Near Encino
If you’re in Encino or just over the line, we cover the surrounding Valley too. Our crews are out in Sherman Oaks, Van Nuys, Valley Glen, and Northridge most weeks. The same written pricing, the same 90-Day Done Right Promise, and the same live person answering the phone. Dispatch and scheduling are coordinated from our Los Angeles office; the crews serve Encino locally.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Encino
In most cases, no – replacing a fence at the same height and in the same location doesn’t trigger a permit. But Encino has a wrinkle: if your fence sits near a property line that was never legally re-established after a teardown or a 1994 repair, and a building inspector notices it during a neighbor’s rebuild, the city can require the fence to be pulled back to the actual setback. That’s why we always check the legal property line before we set posts, even on a simple replacement. Call (877) 610-1318 and we’ll tell you what your specific lot requires.
You don’t, not by looking at them. A 1960s chain-link fence in Encino is almost certainly set in unreinforced concrete – no rebar, shallow depth – and the Northridge quake cracked many of those footings in ways that didn’t show above ground. Over the next 30 years, Encino’s clay-heavy soil has expanded and contracted with every wet winter, and a post that looks straight can be sitting on a fractured footing that’s slowly leaning. We inspect by exposing the footing, not by eyeballing the post. If it’s cracked, we replace it. If it’s sound, we leave it alone and tell you honestly. Estimates are free.
Class A fire-rated aluminum is the most reliable material for passing LADBS wildfire-zone inspection on Encino hillside parcels. It doesn’t ignite, doesn’t carry embers, and it’s available in assemblies that don’t require wood-to-ground contact. Steel works too. Wood is the riskiest – even treated wood can fail ember-resistance requirements if it sits too close to grade or uses the wrong ignition-resistant detailing. If you’re on a hillside lot near Mulholland, don’t guess. Call (877) 610-1318 and we’ll spec a fence that clears inspection the first time.
Maybe, but height limits in Encino depend on your zoning, your setback, and whether you’re in a hillside overlay. Eight feet is allowed in some residential zones but not others, and if you’re close to the property line, you may need to step down to six feet. A new two-story house next door is a common reason Encino homeowners call us, and we understand the frustration. We’ll tell you what the code allows before you spend a dollar, and if eight feet isn’t legal, we’ll show you the next-best option that actually complies. Call (877) 610-1318 for a free estimate.
Figure $1,000 to $4,500 depending on whether the problem is the gate panel, the hardware, or the footing. A gate that’s sagging because the hinges are worn might only need $200 in new hardware and a few hours of labor. A gate that’s sagging because the post is set in a cracked, unreinforced footing from the 1970s needs that footing dug out and replaced – and on a 1970s Encino ranch where the original concrete was poured without rebar, that’s usually the case. We’ll inspect the footing before we quote the repair, so you know exactly what you’re paying for. Estimates are free.
Get Your Free Encino Fence Estimate
If you’re in Encino and you need a fence built, replaced, or repaired, call Tom’s team at (877) 610-1318. We’ll come out, look at the property line, check what’s under the old posts, and hand you a written line-item quote with the scope, the materials, and the price fixed in writing before anything gets ordered. On a hillside lot off Mulholland Drive, our crew replaced a failing 1960s wood privacy fence that had been drywalled over a cracked stem wall from the Northridge quake. We found the old posts set in unreinforced concrete with no rebar, and because the new custom home next door had just passed its foundation inspection, our fence line had to meet current setback and ember-resistance rules. We pulled permits, poured a new engineered grade beam with #4 rebar, and installed a Class A fire-rated aluminum fence with ignition-resistant eaves detailing – then walked the owner through the inspection sign-off on the same day the punch list closed. That’s the way every Encino fence should be built. Call (877) 610-1318 and let’s get started.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Encino since 1998.