Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Sherman Oaks
Fence installation in Sherman Oaks typically runs $3,500 to $9,000 for a standard vinyl or wood fence, with aluminum running slightly higher at $4,000 to $10,000. Most wood privacy and vinyl jobs finish in two to four days once materials land, and the quote you get from us is the price you pay, because every scope change arrives as a written change order before a single post hole is dug. If you live south of Ventura Boulevard toward Mulholland Drive, your fence will likely trigger LADBS hillside grading review, and that changes both the engineering and the honest price. Call (877) 610-1318 for a free estimate and we’ll walk the lot with you.
Why Barrett & Sons Construction Is Sherman Oaks’s Preferred Fence Installation Company
Tom Barrett started Barrett & Sons Construction in 1998 and put his name on the truck for a reason: when something’s not right, you know who to call and where he lives. His sons run the fence crews. That matters in Sherman Oaks, where hillside lots south of Ventura Boulevard demand a contractor who has actually navigated LADBS soils review, not one who Googles it after you sign. We don’t send strangers. The crew that shows up at your house on Moorpark Street or off Beverly Glen wears the Barrett & Sons uniform and has been background-checked.
We answer the phone with a live person, 24 hours a day, 7 days a week. No voicemail box, no out-of-state call center. When a Sherman Oaks homeowner calls about a fence that’s leaning into a neighbor’s yard after February rain, Tom or one of his sons picks up. Our 90-Day Done Right Promise is written into every contract: if it’s not done right, one call brings us back to make it right. We also carry a Free Second Opinion on Any Written Estimate, so if someone from Van Nuys handed you a number that seems low, bring it in. We’ll show you what they missed, in writing.
Our Fence Installation Services in Sherman Oaks
Wood Fence
Wood privacy fences are the most common fence we build in Sherman Oaks, especially on the flat tract-home streets north of Ventura Boulevard like Nagle Avenue and Kester Avenue. We use #2 grade Western red cedar or pressure-treated pine, but here’s what matters: with Sherman Oaks summer heat pushing past 100°F on south-facing slopes, nails-only pickets warp and pull loose within a few seasons. So we spec stainless steel ring-shank nails and, on hillside lots, hot-dip galvanized steel post anchors set in concrete. A wood fence in Sherman Oaks should last 15 to 20 years, not six.
Chain Link Fence
Chain link remains the workhorse for Sherman Oaks rental properties and apartment court yards along the Ventura Boulevard corridor. It’s cost-effective, it holds up to dogs and kids, and it doesn’t care about smog. The failure point we see again and again is the terminal posts at gates: people cheap out on the post diameter and the gate sags within a year. We set 2-3/8″ or larger galvanized posts in concrete, because a sagging chain link gate in Sherman Oaks is a security problem, not just a nuisance.
Vinyl Fence
Vinyl fence installation in Sherman Oaks runs $3,500 to $9,000 for a typical yard. Homeowners like it because it doesn’t rot, doesn’t need painting, and shrugs off valley UV better than untreated wood. But vinyl expands and contracts in 100°F-plus heat, so post footings need to be set deep and straight. On hillside lots south of Ventura Boulevard, we won’t set vinyl posts without a grading review: vinyl panels can’t flex on a slope like wood pickets can, and a fence that fights the hillside will crack at the post line.
Aluminum Fence
Aluminum fence installation in Sherman Oaks runs $4,000 to $10,000, and the price difference between a good aluminum fence and a bad one shows up fastest right here. Inland-spec powder-coated aluminum from big-box suppliers pits along the top rail and gate hinges within two years of exposure to valley smog and occasional Santa Ana salt air. We specify marine-grade, heavy-gauge aluminum with a baked-on finish rated for coastal-inland conditions, and we set posts in concrete with drainage. It costs more up front and far less by year ten. For more on what we offer see our Fence Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sherman Oaks
Barrett & Sons carries hardware and materials you can look up, not mystery brands off a van. We stock hot-dip galvanized post anchors, stainless steel ring-shank nails, and marine-grade aluminum from suppliers who publish their specs. Our GAF materials background on the roofing side taught us one thing that carries over to fences: in Sherman Oaks heat and smog, the difference between a 6-year fence and a 20-year fence is usually the fastener, not the panel. We keep those premium fasteners on the trucks, not on backorder.
Common Fence Installation Problems We See in Sherman Oaks Homes
- Rotted post bases in hillside clay: Untreated pine posts set directly into Sherman Oaks hillside soil snap at the base within five years. The clay holds moisture against the wood all winter. We pull the old post, excavate to 30 inches, and set galvanized steel anchors in concrete with crushed-rock drainage at each footing.
- Warped pickets from valley heat: South-facing slopes off Mulholland Drive regularly see 105°F-plus summer days with unshaded lumber drying and shrinking. Nail-only pickets curl within two seasons. We spec ring-shank stainless nails and, where the client wants wood, a marine-grade clear sealer.
- Pitted aluminum top rails and hinges: Valley smog mixed with occasional Santa Ana salt air corrodes inland-spec powder coating in under two years. The hinges seize first. We replace with marine-grade aluminum hardware rated for this environment.
- Non-engineered slope footings: Fence posts on Sherman Oaks hillside properties south of Ventura Boulevard must be sized for landslide-prone expansive soils. Flat-valley contractors crossing over from Van Nuys often bid posts that LADBS won’t approve. We handle the soils review and grading sign-off so the permit closes.
Pricing for Fence Installation in Sherman Oaks, CA
Here are honest numbers for Sherman Oaks fence work, based on what we’ve quoted and built across 91403, 91413, and 91423:
| Service | Typical Sherman Oaks Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Fence Repair | $400 - $1,800 |
What moves the price: total linear footage, post depth and footing spec on hillside lots, whether LADBS grading review applies, and whether we’re tearing out old concrete-set posts that need hammering out. A flat-lot vinyl fence on a standard 60-foot yard in the flats will sit at the low end. A hillside aluminum fence south of Ventura Boulevard with engineered footings and a grading sign-off will sit at the top. Either way, you get the written line-item quote before work starts, and every change comes as a written change order. No surprise invoices, ever. Call (877) 610-1318 for your free estimate.
We Also Serve Cities Near Sherman Oaks
Barrett & Sons crews serve Fence Installation in Sherman Oaks and the surrounding San Fernando Valley communities, including Valley Glen, Van Nuys, Studio City, and Encino. If you’re just over the line, we’ll still come walk the lot and write you a straight quote, no trip charge inside the county.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Sherman Oaks
Yes, if your property sits south of Ventura Boulevard in the Santa Monica Mountains foothills, LADBS Hillside Ordinance review often applies when we set new posts or replace footings. We pull the permit, coordinate the grading review, and get the inspection signed. Call (877) 610-1318 and we’ll check your lot against LADBS records before you spend a dime.
Hot-dip galvanized steel post anchors set in concrete with crushed-rock drainage outlast wood posts by decades in Sherman Oaks hillside clay. We use them on every hillside fence and recommend them on flat lots too, because the clay holds moisture against wood year-round. For the pickets, powder-coated marine-grade aluminum or properly sealed Western red cedar both hold up well in valley heat when fastened with stainless ring-shank nails.
Because Burbank sits on the other side of the Cahuenga Pass and doesn’t get the same smog-and-salt-air combination that eats inland-spec powder-coated aluminum. Sherman Oaks aluminum fences need marine-grade finishes and heavier gauge rail to survive valley smog and Santa Ana conditions without pitting at the hinges. The inland spec fails here within two years; the coastal spec lasts. That difference is the price gap. Call (877) 610-1318 and we’ll show both specs and the honest math.
Use #2 grade Western red cedar or pressure-treated pine, fasten every picket with stainless steel ring-shank nails, and apply a marine-grade clear sealer before the first summer. South-facing slopes off Mulholland Drive get the worst of the heat, so those fences need the sealer reapplied every few years. Our Fence Installation team specs and applies this as part of the job, not as an add-on surprise.
You can try, but you’ll likely get a stop-work order from LADBS when the grading review is triggered and the footings don’t match what the hillside requires. We’ve fixed enough of those jobs to know it costs more to redo than to do right the first time. Tom Barrett and his sons handle the soils review, the engineered footings, and the final inspection sign-off. Call (877) 610-1318 before you buy the materials.
Why Sherman Oaks’s Hillside Clay Changes Everything About Your Fence
There’s a real local failure we see more than any other in Sherman Oaks: a flat-valley contractor from Van Nuys bids a standard post-set fence on a hillside lot, but the homeowner doesn’t know that south of Ventura Boulevard the LADBS Hillside Ordinance classifies the Santa Monica Mountains foothills as landslide-prone. The post holes go in shallow, the clay holds moisture against untreated pine, and six years later the fence leans toward the neighbor’s yard with posts snapped at the soil line. We replaced exactly that fence on a hillside lot off Mulholland Drive: a bowed cedar privacy fence with 4×4 posts rotted at the soil line after only six years. Our crew pulled the old posts, excavated to 30 inches, and set hot-dip galvanized steel post anchors in concrete with crushed-rock drainage at each footing. We used #2 grade Western red cedar with stainless steel ring-shank nails and a marine-grade clear sealer, and the final inspection sign-off cleared the hillside grading review.
That hillside grading review is the difference between a Sherman Oaks fence quote and a generic quote. Flat-valley bids skip it because their contractors never work where LADBS hillside review applies. We live here. We know which streets trigger soils review and which don’t. We know the 1960s and 1970s wood-frame soft-story apartment buildings along Ventura Boulevard have different fencing needs than the tract homes in 91403 or the custom hillside places in 91495. And we know that when summer pushes 108°F on a south-facing slope, an unshaded lumber delivery warps before lunch if it’s not staged correctly. That’s not something you learn from a franchise manual. It’s something you learn by building fences in Sherman Oaks for decades.
Get Your Free Fence Estimate in Sherman Oaks
If you’re ready to price a wood, vinyl, chain link, or aluminum fence in Sherman Oaks, call Tom Barrett and his sons at (877) 610-1318. We’ll walk the lot, check the soil and slope, tell you the honest number, and put it in writing before any work starts. No trip charge inside the county, free second opinion on any written estimate, and the permanent 10% senior and veteran discount on every job. One call, straight answers.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Sherman Oaks since 1998.