Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Encino
Fence installation in Encino typically runs $3,500 to $9,000 for a standard vinyl or wood fence on a flat lot, and most jobs take two to four days once materials arrive. If you’re calling from Encino, we answer the phone at (877) 610-1318 and we’ll give you a written line-item price before anyone digs a post hole. No phone-then-door bait and switch.
We work throughout Encino weekly, from the ranch homes off Ventura Boulevard up to the hillside parcels pushing toward Mulholland Drive. Tom Barrett’s sons run the crews that show up in Encino, and every fence we install here carries the same 90-Day Done Right Promise written on the contract: if it’s not right, one call brings Tom back.
Why Barrett & Sons Construction Is Encino’s Preferred Fence Installation Company
Encino is not a market where you send a sub you’ve never met. A large share of the homes here are post-WWII ranchers with post-1994 Northridge repairs hidden under later cosmetic work, and fences are one of the most common places that legacy shows up. We’ve pulled permits on Encino fences where the original footings were dry-stacked concrete blocks, never engineered, never inspected. LADBS noticed. We fixed it.
Tom Barrett founded Barrett & Sons in 1998 and he publishes his name, his address, and his license number. Ask anyone on your street, or look up the license number yourself. Our Fence Installation team carries premium materials you can verify: redwood, cedar, Simpson post anchors, steel gate frames. Not mystery stock off a van.
Calls from Encino are answered by a live person, not a voicemail box, not an out-of-state call center. And every crew member who walks your property is background-checked and uniformed. We treat your fence line like it’s Tom’s own: the same crew, the same standards, the same 90-Day Done Right Promise.
Our Fence Installation Services in Encino
Most Encino fence work falls into four categories: wood privacy fences, chain link, vinyl, and aluminum. Each one behaves differently in Encino’s climate, and each one has local permit and footing considerations. Here’s what we see on the ground.
Wood Fence
Wood is still the most common fence in Encino’s ranch-lot neighborhoods, and for good reason: it’s the right look for a 1960s single-story, it’s structurally forgiving, and it can be built to handle Valley heat. We build with redwood or rot-resistant cedar, set posts at 30-inch depth with gravel drainage below the footing, and use Simpson post anchors on every post. Encino’s clay-rich soil expands and contracts through the wet-dry cycle, and a shallow post set in that soil heaves within two seasons. We don’t set shallow posts.
Chain Link Fence
Chain link gets used a lot on Encino’s larger flat lots and along side yards where a homeowner wants security without blocking light. Galvanized or vinyl-coated chain link with concrete footings holds up fine in the Valley heat. The common failure we see in Encino is a chain link fence that was installed after 1994 without proper tension wire or a bottom rail, so the mesh sags and the gate binds within a year. We tension and set every line post in concrete.
Vinyl Fence
Vinyl fence installation in Encino runs $3,500 to $9,000 for a typical lot. Vinyl handles 105°F summers without drying, cracking, or fading the way many painted wood fences do, and it resists the rot and termite pressure that hit wood in Encino’s irrigated ranch lots. The catch: vinyl expands and contracts with temperature swings, so the posts need room to move within the rails, and gates need adjustable hinges. We account for both at install, not as a change order later.
Aluminum Fence
Aluminum fence installation in Encino runs $4,000 to $10,000. On the hillside parcels south of Ventura Boulevard, where a fence has to hold a grade change or a retaining wall, aluminum is often the right call because it’s light, rust-free, and stiff enough for long runs. We anchor aluminum posts into reinforced concrete, and we’re particular about gate frame hardware because an Encino hillside gate that sags is a gate that drags.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
We carry and install named materials you can look up: Techo-Bloc and Oldcastle for post and panel base systems where a fence meets a driveway or walkway, and Quikrete for the concrete we mix on-site for every footing. The point isn’t the brand name on a bag; it’s that we don’t substitute no-name materials between the quote and the install. If we price a redwood fence with Simpson anchors and Quikrete footings, that’s exactly what shows up at your Encino address.
Common Fence Installation Problems We See in Encino Homes
- Heaving posts from Encino’s expansive clay soil. Post footings set shallow in Encino’s clay-rich soil crack and heave within two seasons of the Valley’s wet-dry swings. We excavate to 30-inch depth and add a gravel drainage base under every footing so the post doesn’t move.
- Unpermitted post-1994 fences that get red-tagged during a sale or remodel. A fence rebuilt quickly after the Northridge quake often has no continuous footing and no steel anchors. When a title search or a remodel inspection flags it, the entire fence has to come down before the rest of the project can move forward.
- Rot at the base from sprinkler overspray in dense ranch lots. Encino’s older ranch neighborhoods run sprinkler lines close to fence lines, and wood that sits wet against grade rots in a season. We set posts above grade with clearance, use rot-resistant species, and add moisture barriers where the grade meets the panel.
- Gate misalignment on hillside lots and long gravel runs. A gate on an Encino hillside parcel or a long driveway run puts torque on the hinge posts no flat-lot fence ever sees. We frame every gate with steel and set hinge posts in deep concrete so the gate swings true years later, not just on install day.
Pricing for Fence Installation in Encino, CA
Here’s what fence installation actually costs in Encino right now, with line-item honesty:
| Fence Type | Encino Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Wood Privacy Fence (redwood or cedar) | $3,500 - $9,000 |
| Fence Repair (footing retrofit, post replacement) | $400 - $1,800 |
What moves the number in Encino is rarely the material. It’s the footing depth, the soil condition, and whether LADBS requires an engineered retrofit before a new fence can be permitted. We include all of that in the written scope. If a footing needs to go deeper or a retaining wall needs a structural tie, you’ll see it on a written change order before we dig, not as a surprise line on the final invoice. Tom’s rule: the allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 and we’ll price your exact fence line, for free.
We Also Serve Cities Near Encino
Our crews work throughout the San Fernando Valley and the surrounding area. We regularly build and repair fences in Sherman Oaks, Van Nuys, Valley Glen, and Northridge. If you’re just over the Encino line, give us a call and we’ll tell you honestly whether the job fits within our service area.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Encino
Yes, in most cases. Replacing a fence on the same footprint in Encino still triggers an LADBS permit when the fence exceeds the height threshold or when the existing fence was never permitted. That timing is critical: if the old fence was built quickly after the 1994 Northridge quake without continuous footings or steel anchors, a new permit often requires retrofitting those hidden deficiencies before the new fence can be signed off. Call (877) 610-1318 and we’ll run the permit check for your Encino property before you spend a dollar.
Vinyl and aluminum hold up best to Encino’s heat and wind. Vinyl doesn’t crack or fade at 105°F and doesn’t rot from sprinkler overspray in dense ranch lots. Aluminum is light, stiff in long runs, and rust-free, which matters on Encino hillside parcels where a fence faces sustained Santa Ana wind gusts. Wood works too, but only with rot-resistant cedar or redwood, deep footings, and proper clearance from grade. Call (877) 610-1318 and we’ll walk you through what makes sense for your exact lot.
If the lean comes from Encino’s expansive clay soil, repairing the panel without fixing the footing buys you a season or two at best. A post set shallow in clay heaves through the wet-dry cycle and the fence leans again. We repair what can be repaired, but when the footing is the problem, we excavate to 30 inches, add a gravel base, pour reinforced concrete, and set the post with a steel anchor. We’ll show you what’s actually failing before we quote. Call (877) 610-1318.
Hillside fence installation in Encino starts with the retaining wall, not the fence. We check the wall’s structural condition, the grade change behind it, and the drainage. Then we set fence posts into the wall or behind it with deep reinforced footings and steel connections. The fence can’t lean off a wall that’s already moving. Call (877) 610-1318 and we’ll send someone who knows Encino hillsides, not a crew that’s never seen a grade change.
Yes. Encino’s irrigated ranch lots keep soil moisture high right along fence lines, and the combination of moisture, wood at grade, and the Valley’s termite pressure means wood fences in Encino rot and get eaten faster than fences in drier, less irrigated parts of the Valley. We build with heartwood-grade cedar or redwood, set posts above grade, and add moisture barriers where the panel meets the ground. It costs more up front and saves a full replacement in three years. Call (877) 610-1318 and we’ll show you the difference.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Encino since 1998.