Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Ontario, CA | Barrett & Sons Construction
We provide independent PGT service across Ontario, CA - including Rancho Cucamonga Pgt service - with repair, replacement, and new installation for WinGuard, SpectraGuard, and Eze-Breeze lines. What makes our work here different is simple: Ontario sits in the Cajon Pass wind corridor and on top of aggressively cut-and-filled former dairy land, so we size every PGT window for wind loads and settlement conditions that cities twenty miles west never see. We’re Barrett & Sons Construction, owned and operated by Tom Barrett since 1998, and we’ve been working on PGT products in Ontario long enough to know which models hold up here and which ones don’t. Call (877) 610-1318 for a free estimate.
Why Ontario Residents Choose Us for PGT Service
PGT windows and doors are everywhere in Ontario - from the 1920s bungalows near Euclid Avenue to the new Ontario Ranch tracts south of the 60. We know how these products behave in both settings because we’ve pulled failed units out of both. Tom Barrett learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades remodeling and repairing homes across the Inland Empire. He started Barrett & Sons because his oldest boy showed the same interest in tools Tom had at sixteen, and that’s who shows up on your job - Tom and his sons, not a rotating cast of strangers. We also handle Kitchen Remodeling in Ontario when your project scope goes beyond windows and doors.
Our crews work on PGT windows and doors across Ontario’s 1920s bungalows and new Ontario Ranch tracts, so we know exactly how PGT’s impact-rated and vinyl lines perform under the Cajon Pass wind loads and 110°F sun here - independent of any manufacturer program. We’re not a PGT authorized dealer, and we don’t pretend to be. We’re an independent PGT service provider, which means we spec OEM PGT hardware when the frame is sound and tell you straight when it isn’t. Permits pulled, inspections signed, and every price change written down before work starts. That’s how we’ve done it for 29 years.
Common PGT Construction Problems We Solve in Ontario
Here’s what we actually see on Ontario jobsites, week after week:
- Settlement-racked WinGuard vinyl sashes in Ontario Ranch. The cut-and-filled pads in 91761 settle unevenly, which twists the frame and binds the sash. Weatherstripping tears within a few years. The fix is usually a full sash replacement with the correct DP rating, not a roller swap.
- Galvanic corrosion on WinGuard Aluminum frames in older core homes. In 91762 and 91764, sprinkler overspray hits the baked-enamel coating at the sill and eats through to the aluminum. We see it most on north-facing windows where the sun never fully dries the sill. If the corrosion is surface-level we can treat and reseal; if it’s structural, the frame gets replaced.
- Brittle Eze-Breeze vinyl glazing panels. Ontario’s July and August heat - routinely 108-112°F - bakes the vinyl panels until they’re brittle. Then the first Santa Ana event of fall sends a branch or a patio chair into them and they shatter. We replace with fresh panels and recommend keeping the surrounding landscaping trimmed before wind season.
- Fogged SpectraGuard laminated glass in south-facing bedrooms. Ontario Ranch homes with unshaded south exposures see constant thermal cycling on those big bedroom windows. The inert gas escapes, the seal fails, and you get fog between the panes years earlier than you would in a coastal city. We can replace the IGU when the spacer is intact; broken spacers mean a whole new sash.
- Wind-driven leaks at the frame-to-wall interface. The Cajon Pass funnels powerful Santa Ana winds through Ontario in fall, and we’ve seen PGT windows that were installed correctly leak because the flashing wasn’t sized for Ontario’s higher basic wind speed. We pull the trim, inspect the flashing, and reseal properly.
PGT Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s something most PGT contractors in California won’t tell you: the Cajon Pass wind pattern means Ontario sees higher basic wind speed design values than cities to the west like Pomona or Chino. A PGT WinGuard impact window that passed engineering review there can still fail here at the same exposure if it was originally sized for a different city’s wind zone. We’ve seen it happen. Homeowners buy a house in Ontario Ranch, the windows were spec’d for a builder’s standard that didn’t account for Ontario’s position at the mouth of the Pass, and the first strong Santa Ana October loosens the frame seals. When we replace PGT windows in Ontario, we check the actual DP rating against Ontario’s wind load requirements, not just what the old window had. That’s the difference between a fix that lasts five years and one that lasts twenty.
Last July, our crew replaced seven PGT WinGuard Vinyl single-hung windows on a house off Archibald Avenue in Ontario Ranch. The homeowners had fogged glass in two SpectraGuard units and binding sashes on three south-facing windows - the frames were racked from pad settlement. We pulled the old IGs, ordered OEM PGT replacement sashes with the correct DP rating for the Cajon Pass wind zone, and had them caulked and trimmed before the afternoon heat hit 109°F.
PGT Models & Products We Service in Ontario
We service the full PGT residential window and door scope across Ontario:
- PGT WinGuard Vinyl - impact-rated single-hungs, casements, and sliders. The heavy laminated glass in these requires OEM PGT balances and rollers; aftermarket hardware won’t hold the weight and the sash drops or drags.
- PGT WinGuard Aluminum - the workhorse for older Ontario homes. We treat and reseal corrosion, replace sills, and swap IGs when the frame is still square.
- PGT SpectraGuard - laminated glass with argon fill in aluminum frames. When the spacer is intact we replace just the IGU. When the spacer has broken, we replace the sash because a resealed unit won’t hold its gas fill.
- PGT Eze-Breeze - vinyl-glazed porch and patio enclosures. We replace cracked or brittle panels and re-glaze frames before wind season.
We always spec OEM PGT hardware and IGUs when the frame is structurally sound, because aftermarket balances and rollers won’t hold the heavier laminated glass in WinGuard lines. We replace rather than repair when settlement has racked the frame or when seal failure is in a SpectraGuard unit with a broken spacer. PGT sales & service callers across the Inland Empire get the same straight answer on repair versus replace.
PGT Service Pricing in Ontario
Here’s what PGT work costs in Ontario, based on what we’ve quoted and completed across the city:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000-$25,000 |
| Window Replacement | $4,500-$15,000 |
| Emergency & Storm Damage | $400-$1,800 |
What drives the number: how many openings, whether the frames have settlement damage, what DP rating Ontario’s wind zone requires, and whether we’re matching existing PGT lines or doing a full switch. A free estimate from us includes a written line-item quote, and any change after that arrives as a written change order before work proceeds. Call (877) 610-1318 to schedule yours. We’ll do it right the first time, or we’ll come back and make it right.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Construction in Ontario
Yes, when they’re sized and flashed for Ontario’s actual wind exposure. The failure we see isn’t the glass - it’s the frame-to-wall seal on windows that were installed with generic flashing or rated for a lower wind zone than what the Cajon Pass delivers. We pull trim, inspect flashing, and reseal to Ontario’s wind load requirements. Call (877) 610-1318 for an inspection.
Ontario’s summer heat is the culprit. Routine 108-112°F days bake the vinyl glazing until it loses flexibility, then the first fall Santa Ana sends debris into the panels and they shatter. Coastal and basin cities don’t get the same sustained heat, so their panels stay pliable longer. If yours have cracked, we can replace them and recommend whether a different glazing thickness makes sense for your exposure.
It does, and faster than most homeowners expect. Ontario Ranch sits on former Cucamonga-area vineyard and dairy land that was cut-and-filled aggressively. Differential settlement within a few years of original construction is common, and it racks window frames enough to bind sashes and tear weatherstripping. If your PGT windows are sticking or there’s a visible gap at the frame corners, call (877) 610-1318 and we’ll tell you if it’s settlement or just a stuck roller.
Usually yes, especially on homes in 91762 and 91764. The original windows on those 1920s-1950s homes were never designed for Ontario’s wind loads, and many have failing glazing putty and rot at the sills. PGT WinGuard Aluminum is a good fit because it’s impact-rated without a huge visual departure from the original look. We’ll quote the full job including permits and inspection - the price you see is the price you pay.
Depends on the spacer. If the spacer is intact, we can replace just the insulated glass unit. If the spacer has broken - which we see often in south-facing Ontario Ranch bedrooms from constant thermal cycling - the whole sash gets replaced because a resealed unit won’t hold its argon fill. Call (877) 610-1318 and we’ll look at it before you spend a dollar.
Service Areas Near Ontario
We work across the Inland Empire and into Los Angeles County. If you’re in the Ontario service area or nearby, we cover it. That includes PGT service in Elk Grove, PGT service in Corona, plus Rancho Cucamonga, Fontana, Chino, and Upland.
Book Your PGT Service in Ontario Today
If your PGT windows are binding, fogged, leaking, or cracked, don’t wait for the next Santa Ana to find the weak spot. Call Barrett & Sons Construction at (877) 610-1318. We’ll schedule a free estimate, put the numbers on paper, and tell you straight what your windows need. Tom Barrett’s name, address, and license number are published and verifiable - look it up before you sign anything.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Ontario since 1998.







Before
After
Before
After
Before
After