Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDelta Construction in Naples, CA | Barrett & Sons Construction
We provide independent Delta service across Naples, from Old Naples cottages to Pelican Bay high-rises. The one thing that makes our Delta work here different is that we’ve spent years watching which Delta valves, trims, and finishes fail under Collier County’s salt air and high water table and which ones hold up. If you need a Delta tub-to-shower conversion, a seized Delta valve replaced, or a full kitchen or bathroom remodel built around Delta fixtures, call Barrett & Sons Construction at (877) 610-1318.
Why Naples Residents Choose Us for Delta Service
We’re not a manufacturer-authorized shop. We’re an independent Delta service provider, which means we don’t get paid to push one Delta line over another. We stock what actually works in Naples, and we’ve learned that lesson the hard way, job by job, across hundreds of hurricane-rebuild homes in this market. Tom Barrett started this company in 1998, and his sons run the crews now. The name on the truck is the name on the contract. We pull permits on every eligible job, and every price change comes as a written change order before a single fitting moves.
Naples homeowners call us because we answer the phone ourselves, we show up when we say we will, and we don’t guess. A Delta MultiChoice valve body that seized after Hurricane Ian isn’t a mystery to us. We’ve already replaced a dozen of them in Old Naples alone. We’re local. We know the homes, the inspectors, and the water table. That matters more here than almost anywhere else in Florida.
Common Delta Construction Problems We Solve in Naples
- Salt-air pitting on Delta champagne bronze and polished brass finishes. We see this constantly in canal-front ZIP codes like 34102, 34103, and 34105. Even fixtures installed indoors with proper ventilation pit within two to three years when the home sits close enough to brackish water. We stock OEM Delta trim kits for the Leland, Trinsic, and Cassidy lines, and we’ll tell you honestly which finishes survive Naples and which ones won’t.
- Delta MultiChoice universal valve bodies seizing or leaking after slab dewatering. Post-Ian slab settlement on older CBS foundations is common in Old Naples. When the slab shifts slightly, the valve body inside the wall shifts with it. That leads to internal leaks or a handle that won’t turn. We fix it by cutting from the interior, preserving the exterior flood-rating continuity, and installing a fresh Delta MultiChoice universal valve.
- Delta Touch2O solenoid valves clogging with brackish mineral scale. Port Royal and Aqualane Shores homes often run well-fed irrigation systems, and that brackish water leaves scale behind inside solenoid valves. A Delta Touch2O kitchen faucet that flows weak or stops responding to touch usually has a clogged solenoid or a scaled cartridge. We stock the OEM parts to fix it same visit.
- Delta tub/shower diverter spools failing when homes sit empty for six to eight months. During tear-down and rebuild planning, a lot of Naples homes sit unoccupied. Diverter seals dry out. The first pressure test blows them. We replace the spool, check the cartridge, and pressure-test the entire valve before we leave.
- Improperly spec’d Delta valves on exterior walls in Pelican Bay high-rises. Recessing a Delta shower valve into an exterior wall of a 1980s-1990s condo creates a condensation point in the wall cavity. Salt air accelerates the corrosion. We walk every high-rise job before we quote, because sometimes the right fix is relocating the valve, not just replacing the cartridge.
Delta Service in Naples: What Local Conditions Mean for Your Equipment
Naples is the only Florida market where a standard Delta tub-to-shower conversion in a 1950s or 1960s CBS cottage in Old Naples routinely triggers Collier County’s post-Ian requirement for a dewatering plan before the plumbing rough-in. The water table sits 18 to 24 inches below the slab. Cut into the floor to move a Delta drain from tub to shower during a Naples Bathroom Remodeling project, and that hole fills with groundwater within hours. No neighboring city, not Bonita Springs, not Marco Island, enforces that for interior remodels. Here it’s standard. We front-load the dewatering documentation with the permit application because we’ve already waited through the 2023-2024 inspection backlog and watched luxury rebuild timelines collapse. That’s also why our Delta work in Naples comes with a written scope, written allowances, and a written change order before anything changes. The permit inspector works for you, not for me. That’s why I like him.
We’ve watched which Delta lines hold up under these conditions. Delta Leland and Delta Trinsic hold the best trim-to-cartridge tolerances in salt air. Delta Cassidy is popular on our Kitchen Remodeling in Naples and other high-end remodels. Delta Windemere works well in guest baths that don’t get daily use. The finish matters as much as the valve body. Polished brass and champagne bronze pitting in canal-front homes is not a manufacturing defect. It’s Naples. We’ll show you what survives and what won’t before you spend the money.
Delta Models & Products We Service in Naples
We stock OEM Delta cartridges, springs, and trim kits for the Leland, Trinsic, Cassidy, and Windemere lines. Naples salt air and hard water demand exact factory tolerances. Aftermarket seals and spools fail early here, sometimes within months. For non-cosmetic internals on discontinued Trinsic finishes, we use OEM only. No exceptions. Our Naples crews carry the common cartridges and valve bodies on the truck, which means most Delta repairs get done in one visit instead of two.
We also handle full bathroom and kitchen remodels built around Delta fixtures. A tub-to-shower conversion in Naples isn’t just swapping a valve. It’s moving a drain, planning for groundwater, pulling a permit, and matching trim to what’s already on the walls. We do that every week. Delta sales & service is what we build our remodeling work around.
Delta Service Pricing in Naples
Here’s what you can expect to pay for common Delta and Delta-adjacent construction work in Naples. These ranges reflect current Collier County labor and materials, and they include our written scope and permit work where applicable. Every estimate is free, in writing, and line-itemed. No allowances that aren’t on paper. No change orders after the fact.
| Service | Price Range in Naples |
|---|---|
| Bathroom Remodel | $9,000 - $28,000 |
| Tub-to-Shower Conversion | $3,500 - $10,000 |
| Walk-In Shower Installation | $4,500 - $12,000 |
| Kitchen Remodel | $14,000 - $45,000 |
| Countertop Installation | $2,000 - $6,500 |
What drives the cost in Naples is access, foundation condition, and finish selection. A tub-to-shower conversion in a 1957 CBS cottage with a low water table and tight crawl access will run higher than the same job in a newer gated community. We’ll show you the exact line items before you sign. Call (877) 610-1318 for a free estimate. We’ll come out, look at the job, and give you a written number.
Serving Naples, FL - Our Local Coverage Area
We’re based in the Naples area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Delta Construction in Naples
Salt air. Brackish water from the canal accelerates corrosion on any plated finish, and champagne bronze and polished brass are the first to show it. The fix is usually replacing the trim with an OEM Delta finish that resists pitting better in a marine environment, or switching to a finish we know survives Naples. Call (877) 610-1318 and we’ll tell you which route costs less.
Dried-out diverter seals. Older CBS cottages in Naples often sit empty for months during rebuild planning, and the seals dry out. When you lift the knob, water blows past the spool and out the wall. We replace the spool with an OEM Delta part, check the cartridge, and pressure-test the line. It’s usually a same-visit fix.
Spec them now. Waiting means fixture deliveries land after rough-in, and that stalls the whole job. We’ll help you pick Delta lines and finishes that match the build spec and survive Port Royal’s salt air. Then we’ll submit the spec with the permit package so the plumbing rough-in matches what’s actually going on the walls.
Mineral scale in the solenoid valve. Well water in Naples carries brackish minerals that coat the solenoid and restrict flow. Switching to city water doesn’t flush that scale out. We replace the solenoid and cartridge with OEM Delta parts. Call (877) 610-1318 and we’ll quote it over the phone with the exact parts.
It’s legal, but it’s not smart in Naples. Exterior walls in Pelican Bay condos collect condensation, and salt air accelerates corrosion inside the wall cavity. We typically relocate the Delta valve to an interior wall or install a properly insulated valve box. The fix depends on the specific unit and wall assembly. We’ll look before we quote.
Service Areas Near Naples
We serve all of Naples, including Old Naples, Port Royal, Aqualane Shores, Pelican Bay, and North Naples. We also work regularly in Naples service area communities throughout Collier County, plus Delta service in Bonita Springs and Delta service in Port Charlotte for homeowners on the edges of the county.
Book Your Delta Service in Naples Today
Call Barrett & Sons Construction at (877) 610-1318 for a free estimate on any Delta repair or remodel in Naples. Tom Barrett answers the phone himself. We’ll schedule the visit, look at the job, and hand you a written number. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Naples since 1998.