Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDelta Construction in Bonita Springs, CA | Barrett & Sons Construction
We provide independent Delta service across Bonita Springs, handling everything from tub-to-shower conversions to full bathroom remodels in homes that Hurricane Ian left behind. What makes our Delta work different here is simple: we know how Lee County elevation rules and FEMA substantial-damage letters change the scope of a job before we ever touch a valve. If you own a Delta fixture in a storm-affected or older CBS home, call us at (877) 610-1318 for a free estimate. We’re Barrett & Sons Construction, owner-operated since 1998, and we’ve been rebuilding Bonita Springs bathrooms since the surge waters receded.
Why Bonita Springs Residents Choose Us for Delta Service
We’re not a franchise dispatching strangers. Tom Barrett’s name is on the truck, and his sons run the crews. When we work on a Delta Leland or Trinsic shower valve in a 1980s CBS ranch near the Imperial River, we know exactly what that house has been through, because we’ve been inside hundreds of them since September 2022. That same expertise extends to Fort Myers Delta service. That local repetition matters. A Delta cartridge that seizes from hard-water scale in an older galvanized-pipe home needs a different approach than a finish that’s pitting from salt air on a canal-front property. We’ve seen both, and we know which fix holds up. Every job gets the same written change order discipline: if the scope changes, you see it on paper before we move a wall. We carry OEM Delta cartridges and pressure-balance units, and we quote repair-first before recommending replacement. That’s how we’ve earned trust across the 34133, 34134, 34135, and 34136 ZIP codes.
Tom learned the trade at Los Angeles Trade-Technical College, starting with framing and putting in enough field hours to know the job never lies. He started Barrett & Sons partly because his oldest boy showed the same interest in tools Tom had at sixteen. That’s the company you’re hiring.
Common Delta Construction Problems We Solve in Bonita Springs
- Salt-air corrosion pitting brushed-nickel finishes. Canal-front homes in Bonita Springs sit in some of the saltiest air in Lee County. We regularly see Delta Leland and Cassidy trims on exterior-adjacent bathrooms showing pitting and clouding years before the same finish would inland. We’ll match the finish and swap the trim without tearing out the valve body.
- Post-Ian wall movement cracking valve bodies at the soldered joints. Pre-1994 CBS homes with weaker tie-downs shifted when the ground beneath them shifted. That movement cracks rigid copper connections at Delta tub/shower valve bodies. We re-rough with flexible PEX where code allows, which absorbs the movement that keeps breaking rigid joints.
- Hard-water scale seizing MultiChoice cartridges. Older homes along the Imperial River corridor often still have original galvanized piping. Scale builds up, the cartridge seizes, and the handle won’t turn or the tub spout drips. We pull the cartridge, assess the valve body, and replace with OEM Delta parts so the warranty stays intact.
- Elevation-rebuild rough-in mismatches. When FEMA or Lee County pushes a Bonita Springs home into a substantial-improvement rebuild, the finished floor goes up on stem walls or pilings. Original Delta rough-in heights no longer match the new floor, so drains misalign and trims gap. We re-rough to the new elevation before inspection.
- Drain alignment failures in tub-to-shower conversions. A tub drain sits at 14 to 16 inches off the slab. A walk-in shower drain needs to be lower and centered. In Bonita Springs homes being raised for flood compliance, that drain often has to move even higher. We handle the full re-rough, not just a trim swap.
Delta Service in Bonita Springs: What Local Conditions Mean for Your Equipment
In the 34135 ZIP, Lee County assessors are flagging many Ian-damaged homes as exceeding the 50% substantial-damage rule. What looks like a straightforward Delta tub-to-shower conversion on paper becomes a full elevation-compliant rebuild on raised stem walls. That changes everything about how we set your Delta rough-in. The valve has to be positioned for the new finished-floor elevation, not the old one. The drain has to move. And the county inspector won’t sign off until the Delta trim fits the new wall without gaps. A contractor who’s never worked a post-Ian elevation rebuild in Bonita Springs will set the valve to the old height and fail inspection. If you’re considering our Bathroom Remodeling in Bonita Springs, we’ll make sure it’s done right. We’ve been through this enough times on streets like Derhen that we set it right the first time. We’ll do it right the first time, or we’ll come back and make it right.
Delta Models & Products We Service in Bonita Springs
We work on the full Delta residential line: Leland, Trinsic, Cassidy, and Ara are the four we see most in Bonita Springs bathrooms. We also provide Delta service in Naples with the same level of expertise. Each has its own trim footprint, cartridge type, and failure pattern. We pull OEM Delta cartridges and pressure-balance units for any warranty-critical repair. When OEM lead times stretch past what a post-Ian permit deadline allows, we use approved aftermarket stops and supply lines from Krowne or BrassCraft, and we tell you exactly what we’re using and why before we install it. We also keep the common Delta cartridges and trims stocked locally so a Bonita Springs repair doesn’t stall waiting on a parts shipment from a warehouse three states away.
Delta Service Pricing in Bonita Springs
| Service | Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500-$10,000 |
| Walk-In Shower Installation | $4,500-$12,000 |
| Bathroom Remodel | $9,000-$28,000 |
The spread depends on what Ian left you and what Lee County requires. A simple Delta tub-to-shower swap on an inland 34134 home runs toward the lower end. The same job on a 34135 canal-front home flagged for substantial damage, where the floor rises eighteen inches on a stem wall and the drain moves with it, runs higher. Every estimate is free, written, and itemized. You’ll see the Delta valve, the trim, the labor, the permit, and the allowance for the unexpected, all in writing. Call (877) 610-1318 and we’ll put numbers on your specific house, not a generic one from a pricing chart.
Serving Bonita Springs, FL - Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Ask us about our Kitchen Remodeling in Bonita Springs as well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Delta Construction in Bonita Springs
Because your new finished-floor elevation changes where the valve has to sit. On a raised stem wall or piling foundation, the valve body that worked at the old slab height sits too low or too high for the new shower pan and trim. The drain moves too. We re-rough the Delta valve to the new elevation before the inspector comes, so your trim fits flush and the drain lines up. Call (877) 610-1318 for a quote on your specific elevation change.
Yes. We keep the common Delta cartridges, pressure-balance units, and trims on hand for the Leland, Trinsic, Cassidy, and Ara lines, because rebuild deadlines here don’t wait on shipping. If we need a part we don’t stock, we tell you the lead time before we start, not after your shower is torn apart.
We can. Delta’s finish codes are consistent across the Leland, Trinsic, and Ara lines, so we order the exact trim that matches your existing hardware. No mismatched handles, no “close enough” from a supply house. We’ll bring finish samples to your home before you sign anything.
That drip usually means the valve body itself shifted when the wall moved during the storm or the rebuild. A new cartridge can’t seal against a valve body that’s been knocked out of alignment. We pull the trim, check the valve body for stress cracks and alignment, and if it’s compromised we replace the body rather than stacking another cartridge into a failing unit. Call (877) 610-1318 for a diagnosis.
A repair replaces the cartridge, pressure-balance unit, or trim and keeps the existing valve body. A replacement cuts the old valve body out of the wall and re-roughs with a new Delta valve, new supply lines, and often flexible PEX to absorb the movement that older rigid copper can’t handle. In pre-1994 homes with weaker tie-downs, we lean toward replacement when we see movement at the joints, because the repair won’t hold long term. Estimates are free, and we’ll show you exactly what each path costs.
Service Areas Near Bonita Springs
Our crews work Delta jobs across Lee County and the surrounding areas. If you’re in a neighboring community and need Delta service in Port Charlotte, we can help. The same goes for homeowners looking for Delta service in Pasadena. And for the full picture of what we cover locally, see our Bonita Springs service area page. For everything Delta, from parts to full bath remodels, visit our Delta sales & service hub.
Book Your Delta Service in Bonita Springs Today
If your Delta shower is dripping, your tub conversion is stalled, or you’ve got a substantial-damage letter from Lee County, call us. We answer the phone 24/7, and estimates are free. Call (877) 610-1318 today and we’ll schedule a walkthrough at your Bonita Springs home.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Bonita Springs since 1998.