Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Coral Springs
A new fence in Coral Springs typically runs $3,500 to $9,000 for vinyl, and $4,000 to $10,000 for aluminum, depending on lot size and HOA requirements. Most projects take one to two weeks from post-setting to final walkthrough, but the real variable is the architectural review committee. We know that process inside and out, because we live through it on nearly every Coral Springs job. Call (877) 610-1318 and Tom or one of his sons will walk you through it.
If you live in Coral Springs, you already know the drill: your fence isn’t just a fence. It’s a structure that has to clear your HOA’s architectural review committee before Broward County will even look at a permit application. Skip that step and you’re holding a stop-work order and a deed violation letter before the first post hole is dug. We’ve been through the sequence enough times to sequence it correctly the first time.
Why Barrett & Sons Construction Is Coral Springs’s Preferred Fence Installation Company
Barrett & Sons is owner-operated, founded by Tom Barrett in 1998, and the name on the truck matches the name on the phone. When we quote a fence in Coral Springs, the price you see on the written estimate is the price you pay. If the scope changes, you get a written change order before any work happens. No allowance games, no end-of-job surprises.
Coral Springs homeowners keep calling us back for a simple reason: we pull the original plat from the HOA database before we ever mark a post line. That means we know your subdivision’s side-yard setback, rear-lakefront restriction, and wind-load spec before the first inspection. Your neighbors may not care about Coral Ridge Properties covenants. The ARC board does. We do too.
Calls are answered by a live person, day or night. That’s not a call center. It’s one of us.
Our Fence Installation Services in Coral Springs
Vinyl Fence Installation
Vinyl is the workhorse of Coral Springs. It handles the wet season without rot, and it’s the material most HOAs in the 33075 zip approve without a fight. A typical vinyl fence in Coral Springs runs $3,500 to $9,000. We set posts in concrete with proper drainage relief, so the high water table doesn’t heave them out of line within a year.
Aluminum Fence Installation
Aluminum is the go-to for lakefront and pool-side lots, where Coral Ridge Properties covenants often require open sight lines. In Coral Springs, aluminum fence installation runs $4,000 to $10,000. We use stainless post anchors and reinforced gate posts rated for Broward County wind load, because a lightweight aluminum panel still has to hold up in a summer squall.
Wood Fence and Privacy Fence Installation
Wood is where we see the most HOA friction, so it’s where we do the most ARC homework first. On a CBS home in the 33075 zip, our crew replaced a blown-over 15-year-old wood privacy fence after a summer storm. We pulled the original plat from the Coral Springs HOA database, confirmed the side-yard setback for that specific subdivision, and used pre-painted pressure-treated pine with stainless post anchors to meet the ARC’s wind-load and color specs. The rough-in inspection passed on the first visit, and we walked the punch list with the homeowner before final sign-off. That’s how we think every Coral Springs job should go.
Fence Repair and Gates
Sagging gates, storm-leaning posts, rusted hinges. We repair all of it. And yes, if a section is failing because of the water table or a bad original install, we’ll tell you that plainly, with a written scope and a written price before we touch it. You don’t need a whole new fence when a proper concrete collar and a new gate frame will do the job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We stock and install products we can stand behind, and we don’t put up mystery materials off a van. For fences, we work with manufacturers whose warranties are worth the paper they’re printed on. Our crews are background-checked and uniformed, and they carry the Barrett & Sons name because Tom’s sons are on-site on most Coral Springs jobs.
Common Fence Installation Problems We See in Coral Springs Homes
- Start without ARC sign-off. This is the number one failure in Coral Springs. A homeowner hires a crew, the crew starts digging, and a neighbor calls the HOA. Next comes the stop-work notice. The fix takes 30-60 days, minimum, to clear the architectural review committee.
- Post-set in the high water table. Coral Springs sits on former Everglades flatland, and the water table is seasonally high. Setting a post without a concrete collar and drainage relief is how you get shifting, leaning, and a sagging gate within a year.
- Wrong material for the covenant. Some Coral Springs neighborhoods permit a six-foot vinyl privacy fence. Others, especially along the rear lakefront lots, only permit open aluminum or a four-foot vinyl. We check the covenant before we quote, so you don’t pay for a fence you can’t legally install.
- Under-built gates. A big double gate in a summer storm is a sail. We reinforce posts and hinges to wind-load spec, not to whatever was cheapest at the lumberyard.
Pricing for Fence Installation in Coral Springs, FL
We quote in writing, line by line, before any work begins. Here is what our Coral Springs customers typically see.
| Service | Typical Price Range in Coral Springs |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
What moves the number is lot frontage, fence height, gate count, and what your specific HOA covenant requires. A standard rear-yard vinyl privacy fence on a Coral Springs CBS lot usually comes in toward the middle of that range. A full perimeter aluminum fence with two gates on a lakefront lot runs higher. We’ll give you a written, line-item estimate before any commitment, and we honor it. If something changes, you get a written change order first. Call (877) 610-1318 to schedule a free estimate.
We Also Serve Cities Near Coral Springs
Our crews work in Coral Springs and across the surrounding area, including Parkland, Tamarac, Margate, and North Lauderdale. If you’re near Coral Springs, our Fence Installation team covers your neighborhood too. For an overview of what we do in this part of Broward County, see our Fence Installation in Coral Springs page.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Coral Springs
Yes. Nearly every Coral Springs lot is governed by a Coral Ridge Properties deed restriction, which means your fence has to clear your HOA’s architectural review committee before Broward County will accept a permit application. The ARC review commonly takes 30 to 60 days. We factor that delay into every Coral Springs bid timeline as a matter of course, and we pull the plat early so you are not paying crews to stand around waiting. Call (877) 610-1318 for an exact quote, and we’ll map the sequence for your specific subdivision.
It depends on your specific covenant, not the city. Neighborhoods built under the original Coral Ridge Properties master plan often permit vinyl privacy fencing in rear yards, while lakefront lots frequently restrict fencing to open aluminum or four-foot vinyl so sight lines stay clear. We verify your subdivision’s covenant before we quote. If a material is going to get you a deed violation letter, we’ll tell you before you spend a dollar.
We set posts in concrete with drainage relief at the base, and we use post anchors rated for the wind load on your specific lot. Coral Springs sits on former Everglades flatland, and the seasonal water table is high enough to heave a poorly set post within a year. Concrete collars and proper drainage are not optional here. If you have a fence that’s already leaning, call (877) 610-1318 and we’ll tell you honestly whether it’s repairable or needs new posts.
A straight repair that matches existing conditions is usually simpler than a full replacement, but it still has to clear your HOA’s requirements. If the damage is from a named storm, the rules can differ. We’ll tell you what the city and your HOA actually require before we do any work, and we’ll give you a written scope either way. No guessing.
Broward County enforces wind-load standards tied to the Florida Building Code, and your HOA covenant may add its own spec on top. Aluminum and vinyl fences in Coral Springs need reinforced posts and gate anchors that can handle a summer squall without folding or pulling out of the ground. We build to the stricter of the two standards, and we keep the documentation to prove it.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Coral Springs.