Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterPGT Construction in Miramar, CA | Barrett & Sons Construction
We provide independent PGT service and installation across Miramar, and the single thing that sets our kitchen remodeling - Miramar work apart here is that we open walls expecting to find pre-Andrew construction. In Miramar’s 33023 ZIP, that usually means no hurricane straps, no modern flashing, and rough openings that were never square to begin with. If you need PGT impact windows, sliding glass doors, or full roof-to-wall tie-down work, call Barrett & Sons Construction at (877) 610-1318. Tom Barrett started this company in 1998, and we’ve worked on more Miramar ranch homes than we can count.
Why Miramar Residents Choose Us for PGT Service
We’re not a franchise. Tom Barrett runs the crews with his sons, and we answer our own phone. That matters when you’re dealing with PGT impact-rated windows because the frame tolerances are unforgiving. A sash that’s off by an eighth of an inch leaks. A roller that was shimmed wrong gouges the track. We spec genuine PGT replacement parts – sashes, glazing beads, rollers, multi-point lock kits, and compressible gaskets – because aftermarket vinyl extrusions never match PGT’s dimensional tolerances on impact-rated windows. We also carry the local knowledge that only comes from working Miramar’s older blocks for 29 years. Tom grew up in the San Fernando Valley and learned framing at LA Trade-Technical College, but the last two decades have been spent on job sites like yours, figuring out what the last contractor left behind.
We’re an PGT sales & service provider, not a manufacturer-authorized shop. That independence means we recommend the right fix, not the one that pads a corporate quota. Every PGT job in Miramar gets a written line-item estimate before we touch a screw.
Common PGT Construction Problems We Solve in Miramar
- Weathered or missing glazing beads on early WinGuard vinyl frames. Miramar’s salt air and relentless UV chew through the thin vinyl beads on first-generation WinGuard units. You’ll hear glass rattle on windy days and see water staining around the sash. We replace the bead with a genuine PGT extrusion and re-set the glass properly.
- Failed roller assemblies on PGT sliding glass doors. Builder-installed tracks in older Miramar homes were often shimmed over out-of-level original CBS openings. A few years of use and the rollers bind, the track gouges, and the bracket snaps. We re-level the opening, then install new PGT rollers and realigned track.
- Fogged or moisture-stained insulated glass units. Many Miramar homes built before 1994 have no moisture barrier or weep system to speak of. New PGT impact windows get installed into that old humidity pocket and the glass unit fogs from the inside. We pull the sash, replace the IGU, and fix the drainage path so it doesn’t happen again.
- Stripped or rusted multi-point locking hardware on PGT 770 door panels. Miramar’s high water table pushes vapor up from grade, and storm-driven rain does the rest. Shootbolts misalign, deadbolts stick, and stainless hardware eventually rusts. We rebuild the lock assembly with genuine PGT parts and re-square the door panel.
- Water intrusion around PGT frames in flat-roof ranch homes. Miramar’s low-slope and flat roofs concentrate runoff at the wall line. If the original header flashing was never installed correctly, water finds its way behind the PGT frame and down the interior wall. We re-flash the opening header-to-sill and replace any rotted substrate before reinstalling.
PGT Service in Miramar: What Local Conditions Mean for Your Equipment
Here’s the thing about Miramar’s 33023 corridor that changes every PGT job: the vast majority of homes there are single-story CBS ranch houses from the 1950s and 1960s, built decades before Hurricane Andrew forced Florida’s 1994 building code overhaul. That means no hurricane clips, no modern roof-to-wall straps, and openings that were framed for single-pane jalousie or awning windows, not impact-rated PGT units. When you open a wall on Hibiscus Street or anywhere in the older eastern blocks, it’s common to find zero tie-down hardware connecting the roof trusses to the concrete block. Broward County permit review then requires a full tie-down upgrade before the inspector signs off. A homeowner who thinks they’re getting one PGT window replaced is actually looking at a structural retrofit. Western Miramar, built post-1994, rarely triggers that. If you live east of Douglas Road, plan for it.
PGT Models & Products We Service in Miramar
We work on the PGT lines you’ll actually find in Miramar homes: WinGuard vinyl impact windows, the 550 and 7700 series single-hungs, 770 sliding glass doors, and PremierVue sliding patio doors. If the original PGT frame is sound and still carries a legible performance label, we repair it with genuine PGT parts. If the frame is warped, cracked, or missing its label, we tell you straight: full-frame replacement into a properly flashed, properly strapped opening. We keep common PGT parts on hand for Miramar service calls – rollers, lock kits, glazing beads, and gaskets – so we’re not waiting on a parts shipment from upstate every time a door binds. We also install new PGT impact windows and doors, and we handle the roof-to-wall tie-down and flashing work that Broward code requires on older homes as part of our bathroom remodeling - Miramar services. That’s the part most window crews won’t touch.
PGT Service Pricing in Miramar
What drives your cost in Miramar is whether the job is a repair or a full replacement, and whether the opening needs structural work. A single sash replacement on a WinGuard window is straightforward and inexpensive. A full impact window installation in a pre-Andrew CBS home, with tie-down upgrades and new flashing, is a different scope entirely. Here’s what you can expect:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Every estimate we write for Miramar PGT work is a line-item document, and every change order arrives in writing before work proceeds. Call (877) 610-1318 and we’ll walk the scope with you. The estimate is free.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Construction in Miramar
Because many 1950s and 1960s CBS homes in Miramar were built without hurricane clips or straps connecting the roof trusses to the concrete block walls. Under current Broward County HVHZ permit review, any new impact-rated opening on a structure lacking that connection triggers a tie-down upgrade. It’s a code requirement, not an upsell. Call (877) 610-1318 and we’ll tell you before demolition whether your job will cascade into structural work.
If the original windows still carry a legible PGT performance label, we can usually match the frame series, color, and impact rating with a current PGT model. The older WinGuard frames from the 1990s may no longer be in production, but PGT’s current 550 and 7700 series often share similar sightlines. We’ll tell you honestly whether the match is exact or close. Call (877) 610-1318 for a free estimate and we’ll check the labels on your existing units.
We keep the parts that fail most often in Miramar’s climate: rollers for PGT sliding glass doors, multi-point lock kits for the 770 door panels, glazing beads for WinGuard vinyl frames, and compressible gaskets. Those cover the majority of repair calls we get in 33023. Anything outside that and we order genuine PGT direct, which usually adds a few days.
Miramar sits on a low limestone shelf with a high water table, and the ground shifts subtly between wet and dry seasons. That movement can throw a builder-installed track slightly out of level, especially if the original CBS opening was never square. The rollers then bind against the track and eventually fail. We re-level the track, replace the rollers, and the door glides again. Call (877) 610-1318 if yours is starting to stick.
In many older 33023 homes, yes. Broward County treats any new impact-rated opening on a pre-1994 CBS structure as a trigger point for reviewing the roof-to-wall connection. If the roof lacks hurricane straps, the permit requires upgrading the tie-down system. It’s part of why PGT work in eastern Miramar costs more than in western Miramar, where the homes were built after the code change.
Service Areas Near Miramar
We serve Miramar and the surrounding communities, including Miramar service area coverage across Broward County. If you’re nearby, we also provide PGT service in Fort Myers and PGT service in Cape Coral. Tom Barrett lives twenty minutes from most job sites. If something’s wrong, he wants to know about it.
Book Your PGT Service in Miramar Today
We’ll do it right the first time, or we’ll come back and make it right. That’s written on every PGT contract we sign in Miramar. Call (877) 610-1318 now to schedule your free estimate. A live person answers, 24/7.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Miramar since 1998.