Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Irving, CA | Barrett & Sons Construction
We’re an independent KraftMaid service provider working across Irving, and the thing that makes our KraftMaid work here different comes down to soil. Irving sits on Blackland Prairie clay that swells and shrinks with every season, and KraftMaid cabinet runs installed without accounting for that movement will rack, separate from walls, and strip hinge plates within a few years. Tom Barrett and his sons have been setting cabinets in these slab homes since 1998. Call (877) 610-1318 for a free estimate on KraftMaid installation, refacing, or repair anywhere in Irving.
Why Irving Residents Choose Us for KraftMaid Service
We’re not a factory crew and we’re not a national outfit that subs the work to whoever answers the phone. Barrett & Sons Construction is owner-operated, and our KraftMaid sales & service work happens with Tom’s sons on site most days. We work inside KraftMaid cabinetry almost weekly, which means we know how Vantage hinges seat, how Passport drawer glides wear, and what happens to Kemper Choice frames when a 75060 slab heaves a quarter-inch between July and November.
That depth matters when you’re deciding between repair and replacement. We’ve handled KraftMaid installs across Irving’s slab-on-grade ranch houses and the Las Colinas executive remodels, so we know what holds up. Tom grew up in the San Fernando Valley watching crews pour foundations with his dad on weekends, and he trained at Los Angeles Trade-Technical College before putting in enough field hours to know the job never lies. That’s the standard our Irving customers get.
Every estimate is free. Every scope change is a written change order before work starts. And every job carries our 90-Day Done Right Promise in writing.
Common KraftMaid Construction Problems We Solve in Irving
- Hinges pulling out of particleboard side panels. West Irving homes in the 75060 and 75062 ZIPs get serious interior humidity swings because slab moisture migrates up through the foundation. Doors get slammed, panels soften, and hinge screws eventually strip out. We re-drill, dowel, and remount with plates that actually hold.
- Delaminated sink base cabinets. Slow leaks behind toe kicks go unnoticed for months, and Irving’s hard municipal water accelerates the damage with mineral buildup. By the time you see swelling, the box is often compromised. We’ll tell you straight if it’s salvageable or if targeted cabinet replacement makes more sense than repeated patching.
- Faded and cracked finish on upper doors near windows. South-facing kitchens in Las Colinas get brutal afternoon sun, and KraftMaid’s UV-cured finishes will hairline crack after enough exposure. We match door styles and reface the affected run rather than leaving you with mismatched cabinets.
- Loose drawer glide screws in older full-overlay frames. When slab heave racks a cabinet run out of square, the glides bind and screws work loose. We re-square the box, shim the run, and install fresh glide sets so drawers slide without resistance.
- Cabinet runs separating from walls. This is the big one in Irving’s clay soil. A quarter-inch of seasonal movement will pull a wall cabinet run off its screws if it wasn’t mounted with the right hardware. We fix it properly, not with longer screws that just tear out again next season.
We’ll do it right the first time, or we’ll come back and make it right.
KraftMaid Service in Irving: What Local Conditions Mean for Your Equipment
The 75060 and 75061 ZIPs sit on some of the most expansive Blackland Prairie clay in Irving, where slab heave can separate cabinet runs from walls by up to a quarter-inch between dry and wet seasons. That’s not a statistic we read somewhere. In a 1960s brick ranch near the Oak Haven Park area of 75060, our crew pulled a run of KraftMaid Vantage wall cabinets that had separated from a cracked plaster wall after two years of clay swell. We scribed and re-shimmed the lower run, replaced three stripped hinge plates, and installed a floating cleat so the upper cabinets could ride out seasonal movement without pulling screws.
That kind of movement is something KraftMaid installation in neighboring Dallas or Coppell rarely contends with at the same intensity. It changes how we mount every cabinet in west Irving: floating cleats instead of direct screw-through, expansion gaps at soffits, and leveling that accounts for where the slab will be in February, not where it is today. A contractor who hangs KraftMaid cabinets in 75060 without knowing the soil is going to blame the cabinets when doors start binding six months later. The cabinets aren’t the problem. The installation was.
KraftMaid Models & Products We Service in Irving
We install, reface, and repair the full KraftMaid line: the Vantage series, Kemper Choice, Passport series, and the Durham framed line. When we can match existing door overlays with KraftMaid-compatible OEM hinge plates and glide sets, we use them. When original hardware is discontinued, we use high-grade aftermarket soft-close adapters that fit without butchering the cabinet. We stock common Vantage and Passport hinge plates and glide assemblies so we’re not waiting on a shipment when your kitchen is torn apart. And our honest stance is this: a delaminated box or cracked frame stile from structural movement calls for targeted refacing or replacement, not a third round of hinge repairs. You deserve a kitchen that works, and we won’t keep charging you to patch something that’s done.
KraftMaid Service Pricing in Irving
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 - $13,000 |
| Cabinet Refacing | $4,000 - $13,000 |
| Kitchen Remodel | $14,000 - $45,000 |
| Kitchen Island Installation | $3,000 - $10,000 |
| Countertop Installation | $2,000 - $6,500 |
What drives cost in Irving? Soil conditions for one. If we’re installing in a 75060 pier-and-beam home, we may need floor support upgrades before cabinets go in. Hard water wear means we sometimes have to rebuild sink bases rather than just re-hang doors. Your free estimate includes a walkthrough, measurements, and a written scope. Call (877) 610-1318 to schedule one.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - KraftMaid Construction in Irving
Can you reface existing KraftMaid cabinets in a west Irving home with slab movement cracks?
Yes. We reface KraftMaid cabinets throughout Irving’s 75060 and 75062 neighborhoods regularly. The key is addressing the underlying movement first: we re-square the run, shim where the slab has shifted, and use floating mounting before refacing so your new doors and veneers don’t inherit the same racking. Call (877) 610-1318 and we’ll assess your specific cabinet run.
Do KraftMaid cabinets hold up in Irving’s hard-water kitchens?
Mostly, if they’re installed right and leaks are caught early. The weak point is sink base cabinets, where slow drips behind toe kicks go unnoticed and hard-water minerals accelerate delamination. We see it constantly in Irving homes. Good installation with sealed edges and regular leak checks will prevent most failures. If you’ve already got swelling, we’ll tell you whether repair or replacement is the honest choice.
Can you match an existing KraftMaid door style if only a few doors are damaged?
Yes, in most cases. We carry samples for Vantage, Kemper Choice, Passport, and Durham framed doors, and we can order matching doors through our independent supplier channels. For older or discontinued lines, we have a finish matching process that gets close enough for a kitchen you’ll live in, not a showroom. Bring us a door and we’ll show you options before you spend anything.
Will installing KraftMaid cabinets in a 75060 pier-and-beam home require extra floor support?
Sometimes. Pier-and-beam homes in Irving’s older west-side neighborhoods can have settled or sagging floor structures, and cabinets are heavy. We check floor level and joist condition during the estimate. If support is needed, you’ll see it as a written line item before work starts, never a surprise invoice at the end. Call (877) 610-1318 for a free estimate.
What KraftMaid repair is most common after a Texas summer in Irving?
Loose hinge plates and binding doors from seasonal slab movement. The clay dries out and shrinks through Irving’s extended hot months, the slab settles, and cabinet runs rack out of square. Hinge screws strip, doors bind at corners, and homeowners think the cabinets failed. Most of the time, the cabinets are fine. They just need re-squaring, shimming, and remounting with hardware that tolerates movement. That’s a standard repair for us, and we can usually handle it in one visit.
Service Areas Near Irving
We serve Irving and the surrounding cities. Beyond Irving service area coverage, we work in Los Angeles, San Diego, San Jose, San Francisco, Fresno, and Paramount. For neighboring KraftMaid work, see KraftMaid service in Garland and KraftMaid service in Frisco.
Book Your KraftMaid Service in Irving Today
Call (877) 610-1318 to schedule your free KraftMaid estimate in Irving. Tom or one of his sons will walk your kitchen, give you a written scope, and tell you straight what needs fixing and what doesn’t. No pressure, no phone-then-surprise pricing.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Irving since 1998.







Before
After
Before
After
Before
After