Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterKraftMaid Construction in Garland, CA | Barrett & Sons Construction
We provide independent KraftMaid cabinet installation, refacing, and Kitchen Remodeling in Garland. The work here looks different than it does in Frisco or McKinney: Garland’s slab-on-grade ranch homes sit on Vertisol clay that heaves seasonally, and many of those kitchens carry decades of unpermitted additions. When we install KraftMaid cabinets in Garland, we check the slab, the framing, and the permit history before the first box gets opened. Call (877) 610-1318 for a free estimate.
Why Garland Residents Choose Us for KraftMaid Service
Barrett & Sons Construction has been owner-operated since 1998, and Tom Barrett’s sons run most of the crews you’ll see on a Garland job site. That matters when you’re trusting someone with a kitchen you cook in every day. Tom grew up in the San Fernando Valley watching foundation crews work, learned framing and finish work at Los Angeles Trade-Technical College, and has spent the better part of two decades building and remodeling homes. He writes his name, his address, and his license number on every contract – look it up before you sign anything.
We work with KraftMaid sales & service cabinetry weekly. We know the Vantage and Momentum lines, the older pre-2010 thermofoil doors, and what happens when Garland’s humidity gets into them. We carry OEM hinges, glide hardware, and door fronts for warranty-covered work, and we keep quality aftermarket clips and fasteners in stock for out-of-production models. Every job gets a written scope, written allowances, and written change orders before anything changes. The permit inspector works for you, not for us – that’s why we like him.
Common KraftMaid Construction Problems We Solve in Garland
- Delaminated thermofoil doors. Older KraftMaid thermofoil lines, especially pre-2010, peel at the edges after years of Garland’s humidity swings. It shows up worst in unventilated kitchens – common in 1950s and 1960s ranches that never got a proper exhaust fan. We can reface, replace doors, or tell you straight when full replacement makes more sense.
- Hinge cup screws stripped from particleboard stiles. Garland’s clay soils make slabs heave, which twists cabinet openings out of square. That stress pulls hinge screws right out of wall cabinet stiles. We reset the boxes, shim them level, and use larger-diameter fasteners with the right bite for particleboard.
- Snapped adjustable shelf clips. In older Garland ranch kitchens without a pantry, homeowners pile cast-iron cookware into KraftMaid base cabinets. The original clips fail. We replace them with heavier-gauge aftermarket clips that hold better than the originals and match the existing shelf pin pattern.
- Drawer glide brackets pulling loose. KraftMaid’s mid-2000s frameless lines used short screws into cabinet side panels. Seasonal wood movement in Garland loosens them, and drawers start sagging or jamming. We remount the glides with reinforced brackets designed for slab-on-grade homes.
- Out-of-square openings after slab repair. When Garland homeowners have foundation work done, the kitchen cabinets rarely go back in square. We realign KraftMaid wall and base runs, adjust doors, and reset drawers so everything closes the way it should.
KraftMaid Service in Garland: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a national KraftMaid page. Garland’s 75040 through 75042 corridor holds one of the highest concentrations of unpermitted mid-century room additions in Dallas County. People added rooms and converted garages across decades of ownership, often without permits, and those spaces now contain kitchens with original KraftMaid cabinets. When we reface or replace KraftMaid cabinetry in those additions, Garland inspectors routinely require framing reinforcement for wind load before cabinet work can be signed off. That’s not a hurdle we run into on every Allen or Frisco job – it’s a Garland-specific reality. On a 1963 ranch off Belt Line Road near 75042, our crew pulled original KraftMaid Vantage wall cabinets in a converted garage that had never been permitted. The slab had heaved three-quarters of an inch over the decades, twisting the cabinet boxes and snapping shelf clips. The garage conversion lacked a load-bearing header, so the inspector required framing upgrades before we could install new KraftMaid Momentum cabinets. We reframed the opening, reset the cabinets on shims with adjustable legs, and hung the doors square. The permit closed, and the kitchen works.
KraftMaid Models & Products We Service in Garland
We install and service KraftMaid Vantage, Momentum, Passport Series, and Custom lines. For warranty-covered work, we source genuine KraftMaid door and drawer fronts, hinges, and glide hardware. For out-of-production models, we match finish and profile with aftermarket hinges and clips that outlast the original fasteners – and we’ll tell you when the math favors full replacement over piecemeal repair. We keep common hardware stocked for fast Garland turnaround, which means less waiting when a hinge gives out or a drawer glide fails.
KraftMaid Service Pricing in Garland
| Service | Price Range |
|---|---|
| Cabinet Refacing (KraftMaid veneer + hardware) | $4,000 – $13,000 |
| Kitchen Island Installation with KraftMaid cabinets | $3,000 – $10,000 |
| Countertop Installation (quartz/granite on KraftMaid base) | $2,000 – $6,500 |
Bathroom Remodeling in Garland follows the same careful process-cabinet refacing runs higher in older ranches when we discover framing or slab issues that need attention first. A free estimate from us includes a written scope, line-item pricing, and an honest read on whether your existing KraftMaid boxes are worth saving. Call (877) 610-1318 to schedule yours.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - KraftMaid Construction in Garland
Yes. We order current Vantage doors and drawer fronts directly and can verify profile and finish against your existing cabinet boxes. For mid-century KraftMaid doors where the original profile is no longer produced, we match the closest available profile and finish, and we’ll show you a sample before any order goes in. Call (877) 610-1318 for a free refacing estimate.
Garland sits on Blackland Prairie Vertisol clay that shrinks in summer drought and swells with fall rain. That seasonal movement heaves slabs and throws cabinet openings out of square. We shim and level every KraftMaid run on Garland jobs, and we check slab condition before installation. Rockwall and Richardson have some of the same clay, but Garland’s older slab-on-grade housing stock makes the movement more visible inside the house. Call (877) 610-1318 for an exact quote – estimates are free.
Possibly. When unpermitted framing, electrical, or HVAC work shows up in a Garland addition, city inspectors require it brought to current code before new permitted work can close. We flag that early, get you a written scope for the corrections, and handle the permits. It’s a delay you want to know about before signing a contract, not after.
They’re a risk. Thermofoil peels when heat and humidity build up with no ventilation, and Garland’s humidity swings make that worse. If you cook without an exhaust fan, we’ll steer you toward painted or stained wood doors for KraftMaid boxes, or we’ll talk about adding ventilation first. Call (877) 610-1318 and we’ll walk your kitchen before you order anything.
Only after the framing gets brought up to code. We’ve done it in Garland more times than we can count. The inspector requires the structure to hold load before cabinets go in, and we handle the framing corrections, the permit, and the final inspection. Call (877) 610-1318 to get a written scope for the whole job.
Service Areas Near Garland
We serve Garland and the surrounding area. If you’re in a neighboring city, you can reach us at the same number. Many of our KraftMaid jobs come from referrals across the metro. For more on our work in nearby markets, see KraftMaid service in Frisco and KraftMaid service in McKinney, and our Garland service area page covers the ZIP codes we work in.
Book Your KraftMaid Service in Garland Today
Call (877) 610-1318 to schedule a free estimate for KraftMaid cabinet work in Garland. We’ll do it right the first time, or we’ll come back and make it right. Every job is backed by our 90-Day Done Right Promise, in writing.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Garland since 1998.