Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Windows & Doors Across Lake Park
Replacing windows or doors in Lake Park isn’t a simple swap. The town sits along the Lake Worth Lagoon, inside Palm Beach County’s high-velocity hurricane zone, and most of the housing stock dates to the 1950s through 1970s, built to codes that no longer apply. That means a window job here has to account for 170+ mph wind loads, FEMA flood-zone rules, and salt air that eats standard hardware. Our Windows & Doors team has done this work in Lake Park for years. We know what inspectors look for, what the salt does to steel lintels, and which impact-rated units actually hold up. Call (877) 610-1318 for a free estimate, and we’ll give you a written line-item quote before anything gets ordered.
Why Barrett & Sons Construction Is Lake Park’s Preferred Windows & Doors Company
Tom Barrett founded this company in 1998, and his name is on every truck, every contract, and every permit we pull in Lake Park. We’re not a franchise dispatching strangers. Tom’s sons run the crews, and the same faces show up from the first measurement to the final inspection. Homeowners in Lake Park have learned the hard way that national outfits quote one number on the phone and hand over a different invoice at the door. Our scopes are written, our allowances are written, and every price change arrives as a written change order before any work starts.
We know the 33403 ZIP code well. We’ve swapped out original jalousie windows on CBS homes along 10th Street, replaced salt-corroded sliding doors near Kelsey Park, and pulled permits for impact-rated openings on houses just blocks from the Intracoastal. A live person answers our phone 24/7, not a voicemail box or an out-of-state call center. And our 90-Day Done Right Promise is written on every contract: if it’s not done right, Tom comes back and makes it right, one call.
Windows and doors in Lake Park are code-driven work. We publish our license number, and permits get pulled and inspections signed on every eligible job. The permit inspector works for you, not for us, and that’s exactly how we like it.
Our Windows & Doors Services in Lake Park
Impact Windows & Doors
This is the service we recommend most often in Lake Park, because the town’s position along the lagoon and its FEMA AE flood zones make impact-rated glazing a requirement on most permitted replacements, not an upgrade. A typical impact window installation in Lake Park runs $8,000 to $25,000, depending on opening count, frame material, and whether headers or lintels need reinforcement. Homes built in the 1950s and 60s often have undersized headers or salt-corroded steel lintels that need replacement before the new units go in. We spec stainless steel anchors and hot-dipped galvanized frames as standard practice here, not an upsell.
Hurricane Impact Windows
Lake Park’s original single-pane and jalousie windows fail Palm Beach County’s current wind-load and impact-glazing requirements. If you’re doing a permitted remodel, the inspector will flag them. Hurricane impact windows carry large and small missile ratings and meet the 170+ mph design wind speeds the Florida Building Code demands in this area. We install Simonton and PGT units most often in Lake Park, because their coastal product lines hold up to salt exposure better than builder-grade alternatives. No plywood to haul out, no shutters to crank, and the glass stays in one piece if something hits it.
Window Replacement
A full window replacement in Lake Park typically runs $4,500 to $15,000, and the spread comes down to size, quantity, and whether the original frames are salvageable. On older CBS homes, the rough openings are often irregular, the frames have shifted over decades, and the existing anchors may be rusted through. We write every scope in writing before ordering anything, including what we’ll do if the rough-in reveals pre-code conditions. That’s not a hypothetical in Lake Park. It’s the norm.
Impact Sliding Glass Doors
Sliding glass doors on the rear of Lake Park homes face the prevailing weather and the salt-laden air off the Intracoastal. Standard aluminum tracks and rollers corrode within five to seven years here, leaving doors that stick, bind, or leak around the frame. We install impact-rated sliding doors with marine-grade hardware and sealed tracks rated for coastal exposure. If a door has already reached the point where the frame is pitted or the threshold has rotted, replacement is usually cheaper than repeated repairs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Park
We install windows and doors we can stand behind, from manufacturers whose warranties hold up in coastal Florida. PGT and Simonton are the brands we spec most often in Lake Park because their impact lines are built for high-velocity hurricane zones and salt exposure. We also work with Ply Gem and CGI product lines depending on the opening and the budget. When you call us, we’ll tell you exactly which brands and model numbers fit your house and why, and we keep local parts access for Lake Park customers so a warranty fix doesn’t turn into a six-week wait. Materials you can look up, not mystery brands off a van.
Common Windows & Doors Problems We See in Lake Park Homes
- Salt-corroded steel frames and hinges. Within five to seven years of exposure to the lagoon air, standard steel window frames and door hinges start pitting and binding. Seals fail, sashes stick, and water finds its way in around the track. We replace these with stainless or hot-dipped galvanized hardware as standard, not as an upgrade.
- Jalousie and single-pane windows that fail current code. The original windows on most 1950s-70s CBS homes in Lake Park don’t meet Palm Beach County’s impact-glazing or wind-load requirements. Any permitted remodel surfaces them for replacement, and trying to sneak around that just delays the inevitable.
- Slab-on-grade flood-zone complications. Homes in FEMA AE zones often have opening elevations that don’t match current Base Flood Elevation. A window or door replacement can trigger flood-resistant installation requirements, including reinforced headers and specific anchoring methods that inland contractors never touch.
- Undersized headers over replaced openings. The original headers on many mid-century Lake Park homes were sized for smaller, lighter windows. When you widen an opening or switch to heavier impact-rated units, the header often needs engineering and replacement before the new unit can be installed and inspected.
Pricing for Windows & Doors in Lake Park, FL
Here’s what we actually see on written quotes for Lake Park work. These are line-item ranges, not phone estimates.
| Service | Typical Lake Park Price Range |
|---|---|
| Impact Window Installation | $8,000 - $25,000 |
| Window Replacement | $4,500 - $15,000 |
| Impact Sliding Glass Door | $4,000 - $12,000 |
The spread comes down to opening count, frame material, whether headers or lintels need reinforcement, and how much salt damage has accumulated in the existing rough openings. A house near the Intracoastal that’s been exposed for 40 years will need more prep than an inland block of the same age. Our estimates are free and written, and we don’t change the number once the scope is set unless a written change order lands in your hands first. Call (877) 610-1318 and we’ll come out to Lake Park, measure everything, and hand you a line-item price.
We Also Serve Cities Near Lake Park
Our crews work throughout the northern Palm Beach County coastal corridor. In addition to Lake Park, we serve homeowners in Riviera Beach, North Palm Beach, Palm Beach Gardens, and Palm Beach. Each town has its own code quirks and flood-zone patterns, and we handle the permitting differences so you don’t have to chase paperwork.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Windows & Doors in Lake Park
It can. Lake Park’s position along the Lake Worth Lagoon places a large share of its homes inside FEMA AE flood zones, and the NFIP substantial-improvement rule kicks in when the cumulative cost of renovations over a rolling period crosses 50% of the structure’s pre-improvement market value. A window replacement alone rarely hits that threshold, but if it’s part of a larger remodel like a kitchen or addition, the combined cost can cross the line, and that triggers mandatory compliance with current flood-zone elevation requirements. We’ve seen routine remodels on slab-grade CBS homes turn into six-figure elevation projects. Call (877) 610-1318 and we’ll walk you through the math before you commit to anything.
Because the coastal-spec hardware, anchoring, and frame materials required for Lake Park’s salt air and flood-zone conditions cost more than the inland-spec version of the same job. Stainless steel anchors, hot-dipped galvanized frames, and marine-grade track systems all add cost, and they’re necessary here, not optional. A window job priced like an inland Palm Beach Gardens project is probably quoting inland hardware that will fail within a decade. The cheap spec costs more in the long run, and we’d rather tell you that upfront.
No, not if you want the job permitted and inspected. New jalousie windows don’t meet Palm Beach County’s current impact-resistant glazing requirements, so a permitted replacement has to switch to a rated impact product. Some homeowners ask about it as a money-saver, and we understand the instinct, but the inspector will fail the rough-in, and you’ll pay twice. Call (877) 610-1318 and we’ll show you lower-cost impact options that still pass inspection.
Five to seven years before the corrosion starts binding sashes, failing seals, and pitting the frames. That’s what we see on houses near the lagoon and the Intracoastal. After a decade, many of those frames are beyond repair and need full replacement. We install aluminum and steel products with marine-grade finishes and stainless hardware for Lake Park work, which pushes the useful life well past standard inland numbers.
Yes. A sliding glass door is a structural opening, and in Lake Park, any permitted replacement has to meet current wind-load and impact-glazing requirements. The rough opening also gets inspected, which means the header, anchors, and flood-zone installation method all get reviewed. We pull the permit, schedule the inspections, and sign off before the job closes. Call (877) 610-1318 for an exact quote, estimates are free.
A Quick Note on What We’ve Seen in Lake Park
On a 1960s CBS house near the Lake Worth Lagoon, our crew replaced eight original jalousie windows with impact-rated units after the owner’s kitchen remodel crossed the 50% substantial-improvement threshold. Working around salt-corroded steel lintels and slab-on-grade elevations, we swapped in stainless steel anchors and hot-dipped galvanized frames to meet FEMA AE compliance. The inspection sign-off took three visits because the rough-in had to be verified before the new subfloor tied into the elevation work. That’s Lake Park reality. It is not a quick swap, and anyone who tells you otherwise hasn’t done the job here.
If you’re pricing windows or doors in Lake Park, get a written quote that accounts for the flood zone, the salt air, and the code requirements. We’ll put it all on paper before you spend a dollar. Call (877) 610-1318 to schedule your free estimate.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Lake Park and surrounding communities since 1998.