Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Stanton
Kitchen remodeling in Stanton, CA typically runs $14,000-$45,000 for a full remodel, with small or partial remodels starting around $9,000. Most Stanton kitchens in 1950s-1960s tract homes hide conditions the estimate can’t see until walls come open: aluminum wiring, galvanized supply lines, and slabs that have shifted over decades. We’re Barrett & Sons Construction, and we’ve been opening walls in northwest Orange County homes since 1998. If you’re planning a kitchen remodel in Stanton, call (877) 610-1318 for a free estimate, and we’ll walk the space with you before any numbers hit paper.
Why Barrett & Sons Construction Is Stanton’s Preferred Kitchen Remodeling Company
Tom Barrett started this company because he got tired of watching homeowners get quoted one price on the phone and handed a different bill at the door. That’s the core of how we approach every Kitchen Remodeling job in Stanton: scope in writing, allowances in writing, change orders in writing. When you call us about a kitchen, you talk to a person, not a voicemail box. Tom’s sons run the crews, and Tom is on-site for most of the work we do in the 90680 zip code.
Stanton is roughly three square miles of post-WWII tract homes, which means the houses we work on here share the same DNA: ranch-style slabs, original framing, and plumbing that’s been in the ground since Eisenhower was president. We know those houses because we’ve remodeled dozens of them. The permit inspector works for you, not for us, which is why we pull permits on every eligible job and invite the inspection. Our customers in Stanton see Tom at the hardware store, at the gas station, at the community center. That’s the point of hiring an owner-operated local crew: the name on the truck is the person you’ll run into next week.
Proudly serving local communities for 29 years, Barrett & Sons carries a 90-Day Done Right Promise on every contract. If it’s not done right, Tom comes back and makes it right. One call. That’s written on every remodel we run through Stanton.
Our Kitchen Remodeling Services in Stanton
Full Kitchen Remodeling
A full kitchen remodel in Stanton means gutting back to the studs and rebuilding with current California code. Most Stanton kitchens in the 1950s-1960s ranch stock need more than new cabinets: they need copper rough-in, new circuits, load-bearing wall corrections, and often a full slab repair before the finish work starts. Our full remodels run $14,000-$45,000 depending on what the framing reveals and the finish level you choose.

Cabinets & Countertops
Cabinet installation in Stanton runs $4,000-$13,000, and countertops add $2,000-$6,500 depending on material and square footage. We install and reface cabinets in Stanton homes every week, and we carry KraftMaid for framed and frameless boxes plus Cambria quartz for tops. When we reface, we pull a few doors first to check for water damage behind the old boxes. Older Stanton slabs shift, and a cabinet that looks fine from the front can be hiding rot at the back.

Backsplash, Tile & Flooring
Backsplash work in Stanton kitchens typically lands between $800 and $2,500. Tile and flooring run on a per-square-foot basis adjusted for subfloor condition. Here’s what matters in Stanton specifically: the Orange County basin’s expansive clay soil moves these older slabs, so we check for deflection before laying anything. A tile floor installed over a cracked slab will crack itself within a season. We handle the subfloor first, then the finish.

Kitchen Design & Layout
Design and layout for a Stanton kitchen starts with measuring what’s actually there, not what the assessor’s card says. Many of these ranch homes have load-bearing walls that were opened once before, often poorly. Our design team works around the existing framing, the window placement, and the way the light moves through these west-facing tract homes. Small and partial remodels in Stanton where we keep the existing footprint but rework the layout typically run $9,000-$20,000.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stanton
We install materials you can look up. In Stanton kitchens, that means KraftMaid cabinets, Cambria quartz, and premium tile lines that hold up to the hard water and heat swings of the inland Orange County basin. We don’t stock mystery brands off a van. Homeowners in the 90680 corridor appreciate that you can walk into any showroom and confirm exactly what you’re paying for. Fast turnaround comes from ordering direct and scheduling rough-in inspections around delivery: we don’t hold your deposit hostage waiting on parts.
Common Kitchen Remodeling Problems We See in Stanton Homes
Opening up a Stanton tract home from the 1950s or 1960s almost always reveals conditions the original estimate didn’t anticipate. Here’s what we find, and how we handle it:
- Aluminum wiring feeding the old range and counter circuits. Current California electrical code requires copper rough-in for remodeled kitchen circuits once walls are open. We verify with the city inspector, write the remedy as a signed change order, and run new home runs before any drywall closes.
- Galvanized supply lines corroded from decades of moderately hard Orange County water. These old pipes reduce flow and eventually leak inside walls. When we open a Stanton kitchen wall, we pressure-test before we cover anything back up. If the lines fail, replacement goes in as a written line item, not a surprise invoice.
- Slab movement from expansive clay soil. Stanton sits on the inland flatlands where the ground shifts with moisture. We see cracked slabs under original kitchens constantly. A kitchen island on a 1950s slab requires cutting a new drain path, and we check slab thickness and rebar placement before any concrete saw touches the floor.
- Undersized framing on load-bearing walls. Many of these ranch homes were framed to codes that no longer apply. When we open a wall for an island layout or open-concept flow, we check span tables before cutting. If a bearing wall needs sistered joists or a new header, that’s a written change order, not a mid-job demand.
Pricing for Kitchen Remodeling in Stanton, CA
Here’s what kitchen remodeling actually costs in Stanton, based on the work we’ve completed in 90680:
| Service | Stanton Price Range |
|---|---|
| Kitchen Remodel | $14,000-$45,000 |
| Small Kitchen Remodel | $9,000-$20,000 |
| Cabinet Installation | $4,000-$13,000 |
| Countertop Installation | $2,000-$6,500 |
| Backsplash Installation | $800-$2,500 |
| Kitchen Island Installation | $3,000-$10,000 |
What moves the number is what’s behind the drywall. A Stanton ranch with copper rough-in, no slab issues, and standard cabinets comes in at the low end. A house with aluminum wiring, corroded galvanized lines, and a shifted slab comes in higher. All of it gets written out, line by line, before we start. Call (877) 610-1318 for a free estimate and we’ll walk your kitchen, open a few things up where we safely can, and hand you a written scope with allowances on paper. We also honor a permanent 10% Senior & Veteran discount, plus a free second opinion on any written estimate you already have.
We Also Serve Cities Near Stanton
Barrett & Sons Construction runs kitchens throughout the western Orange County corridor. Beyond our Kitchen Remodeling in Stanton work, we serve homeowners in Garden Grove, Cypress, Westminster, and Midway City. The housing stock shifts slightly from city to city: Garden Grove and Westminster have more recent additions on newer slabs, while Stanton and Midway City share the older tract-home DNA. Same crew, same written change-order process, same phone number.
Serving Stanton, CA - Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Kitchen Remodeling in Stanton
Cabinet and countertop replacement alone typically doesn’t require a building permit in Stanton, but any electrical, plumbing, or structural change does. If your kitchen remodel includes moving a sink, adding circuits, relocating a range, or altering a load-bearing wall, the city requires a permit and inspection. We pull permits on every eligible job. The permit inspector works for you, not for me, which is why we like to see him sign off.
Call (877) 610-1318 and we’ll tell you what your specific scope triggers.
Technically yes, if you’re only swapping cabinet boxes and the walls stay closed. But if we open a wall for cabinet depth changes, under-cabinet lighting, or a backsplash tear-out, and we find aluminum wiring or corroded galvanized pipe, current code often requires remediation before we can close the wall back up. We write that as a signed change order before touching anything. Leaving it hidden is how you end up opening the same wall twice.
Ask for a free estimate and we’ll walk you through what’s likely in your 1950s-era Stanton home before any cutting starts.
Because the quote was written blind. A flat quote without written allowances is a guess. When we open a Stanton kitchen wall, we may find what we found on a ranch home near Katella Avenue: undersized framing, aluminum branch circuits, and a slab that had moved enough to crack the old subfloor. We handle it with written allowances written into the contract from day one, so any change after demo comes as a signed change order showing exactly what was found, what it costs, and what happens next. The allowance that isn’t on paper is a surprise waiting for a date.
Call (877) 610-1318 and we’ll show you what a written kitchen scope looks like for your Stanton home.
Yes, in most cases, but it depends on slab thickness, rebar placement, and where your drain lines sit. Island installations in Stanton run $3,000-$10,000, and the wildcard is plumbing. Cutting a new drain path into a 1950s minimally-reinforced slab requires locating the existing lines, checking for rebar or old footings, and planning the cut before any saw starts. We bring the plumber in before we template the island, not after.
Get a free estimate on your island project by calling (877) 610-1318.
We walk the finished kitchen with you, room by room, and every item goes on a written punch list. Fixes get scheduled before final payment, not after. Our 90-Day Done Right Promise covers any defect that shows up in the first 90 days: one call brings Tom back. And our crew is background-checked, uniformed on every visit, and local enough that Tom can stop by the next time he’s on Katella or Beach Boulevard.
If a punch-list item ever lingers, call (877) 610-1318 and it gets handled.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Stanton since 1998.







Before
After
Before
After
Before
After