Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Kitchen Remodeling Across Cameron Park
Kitchen remodeling in Cameron Park runs $14,000 to $45,000 for a full project, with smaller updates like a backsplash starting around $800. We’re Barrett & Sons Construction, and we’ve been working on the oak-studded lots and ranch homes around 95682 long enough to know exactly which walls hold the surprises. Every project here means El Dorado County permits, WUI fire rules, and scheduling around an inspector driving up from Placerville. Call (877) 610-1318 to talk through your kitchen before you spend a dollar.
Why Barrett & Sons Construction Is Cameron Park’s Preferred Kitchen Remodeling Company
We’re not a franchise dispatching strangers from three counties away. Tom Barrett founded this company in 1998, and his sons run the crews that show up on Cameron Park jobsites most days. When a homeowner on Country Club Drive calls, Tom answers. When something needs a second look after the cabinets go in, Tom’s the one who walks the site. That’s the difference between a name on a truck and a name you’ll see again at the Nugget on Coach Lane.
Cameron Park homeowners have a particular reason to be picky about who they hire. This is unincorporated El Dorado County, not Folsom or Sacramento. Permits route through Placerville. Fire-hardening codes apply to nearly every meaningful remodel. A contractor who doesn’t know Chapter 7A will price a job the same way they would in a flatland suburb, and you’ll eat the difference when the inspector flags your project. We know the code. We know the county. We know which streets near Cameron Park Airport might trigger an FAA obstruction letter before we ever put a ladder up.
Our Kitchen Remodeling Services in Cameron Park
Full Kitchen Remodeling
A full kitchen remodel in Cameron Park means more than tearing out cabinets and laying tile. We’re often pulling an El Dorado County permit that requires a site plan, and the work itself has to survive freeze-thaw winters and 100-degree summers at 1,500 feet in the Sierra foothills. We scope the whole job before the first nail moves: plumbing, electrical, structural changes, WUI compliance, and finishing materials you can look up by brand. All of it goes on paper as a written scope with line-item allowances.
Cabinets & Countertops
Cameron Park homes from the 1960s through 1980s often have original cabinet boxes with mounting that predates modern standards. When we pull those out, we inspect the wall framing behind them before we order anything. KraftMaid and Cambria are the brands we install most often up here. Cambria quartz holds up to Cameron Park’s dry heat without the sealing demands of natural stone, and it doesn’t care about the temperature swings that crack cheaper laminate.
Backsplash, Tile & Flooring
Backsplash and tile work in Cameron Park has to be set over substrates that move. Our freeze-thaw cycles put real stress on grout lines and thin-set. We use Schluter membranes and uncoupling systems on flooring transitions, especially in older split-levels where the subfloor has settled unevenly over 40 years. A backsplash that costs $800 on a flat Sacramento wall might run more here if we’re correcting moisture or leveling first.
Kitchen Design & Layout
The layout conversation in Cameron Park is different than it is in a subdivision down the hill. These homes were built around original 1970s footprints, often with narrow galley kitchens that open awkwardly onto a dining room. We spend real time on sightlines, island clearance, and how a 36-inch walkway changes when you’re working around a load-bearing post the original builder put in a strange place. Tom’s sons will sketch it with you before we write anything. You’ll see exactly what you’re getting.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cameron Park
We stock and order brands you can verify: KraftMaid and Cambria in kitchens, Schluter for waterproofing and tile, Grohe for fixtures. When a Cameron Park homeowner asks us to match an existing Kohler sink or replace a Grohe faucet that’s been through 15 foothill freeze cycles, we can usually pull the part locally and keep the job moving. No mystery brands off a van. Everything we install has a name you can Google, and every product allowance is written into your quote.
Common Kitchen Remodeling Problems We See in Cameron Park Homes
- WUI code triggers on wall openings. When a Cameron Park homeowner widens a kitchen opening toward the dining room, the county often requires Chapter 7A upgrades like ignition-resistant siding or ember-resistant vents. If nobody budgeted for that, the job stalls mid-frame. We flag it in the estimate.
- Original windows and single-pane glass. Ranch homes built in the 1960s and 1970s still carry their original single-pane windows. A kitchen remodel that touches an exterior wall often pushes the project into a window replacement nobody planned for. We write that into the scope before demo starts.
- Steep, sloped lots with drainage challenges. Many Cameron Park kitchens sit on a hillside side of the house. Gutters, slab edges, and drainage have to be accounted for when we move plumbing or add an island. Freeze-thaw cycles crack exposed concrete here, so we don’t skip substrate prep.
- Electrical panels that can’t carry a modern kitchen. Older Cameron Park homes frequently have 100-amp panels. Add an induction range, a built-in microwave, and island outlets, and the panel can’t handle it. We check load before we quote, not after demo.
Pricing for Kitchen Remodeling in Cameron Park, CA
Here’s what we’re actually seeing on Cameron Park jobs right now. A full kitchen remodel runs $14,000 to $45,000 depending on whether you’re keeping the footprint or moving plumbing and walls. Countertops alone run $2,000 to $6,500. A backsplash is $800 to $2,500. The wildcard in Cameron Park is almost always structural: an oak root under the slab, a load-bearing wall nobody identified, a window header that wasn’t sized right in 1972. We scope those before we quote, not after the wall is open. Call (877) 610-1318 and we’ll walk your kitchen with you. Written line-item quotes are free.
| Project | Typical Range in Cameron Park |
|---|---|
| Full Kitchen Remodeling | $14,000 - $45,000 |
| Countertop Installation | $2,000 - $6,500 |
| Backsplash Installation | $800 - $2,500 |
We Also Serve Cities Near Cameron Park
Barrett & Sons runs crews all through El Dorado County and the Folsom edge: Cameron Park, El Dorado Hills, Diamond Springs, Placerville, and Folsom. If you’re on the county side of the line, we already know the permit office you’re dealing with. Our Kitchen Remodeling team handles everything from a small cabinet refresh to a full tear-out.
Serving Cameron Park, CA - Our Local Coverage Area
We’re based in the Cameron Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Kitchen Remodeling in Cameron Park
No, not for a direct cabinet swap where no plumbing, electrical, or structural work is touched. But if you’re moving a sink, adding outlets, changing a window, or opening a wall, the county will likely require a permit. Cameron Park is unincorporated, so every permit routes through El Dorado County in Placerville, not a local city hall. We pull permits for every eligible job. Call (877) 610-1318 and we’ll tell you over the phone whether yours needs one.
Chapter 7A of the California Building Code applies to nearly all of Cameron Park. If your remodel touches exterior walls, adds a window, or changes rooflines, the county may require ignition-resistant siding, ember-resistant vents, or Class A roofing. Those upgrades aren’t optional once the permit threshold is crossed, and they add real cost. We identify them in the estimate so they don’t show up as a surprise change order later. Call (877) 610-1318 for a scoped quote that includes WUI compliance.
If the island has electrical outlets, you need a permit and a county electrical inspection. If it’s a movable cart with no wiring, no. Most built-in islands in Cameron Park homes run $3,000 to $10,000, and the ones with plumbing or electrical almost always require an El Dorado County permit and inspection sign-off. We handle the permit, the rough-in inspection, and the final. Call (877) 610-1318 to talk through your island design.
Cameron Park Airport sits right inside the community. If your property is along one of the runway approach paths, erecting tall scaffolding, a crane, or certain equipment can trigger an FAA Part 77 obstruction evaluation. It’s rare, but it happens on specific parcels near the airport, and it adds a step most contractors outside this area never deal with. We’ve worked with the county and the FAA on these before. Call (877) 610-1318 and we’ll check your parcel’s status before we ever set up equipment.
Many Cameron Park homes aren’t on municipal sewer. If your kitchen remodel moves a sink or adds plumbing, the county will check setbacks from your septic tank, leach field, and well. A new island sink too close to the leach field means a redesign, not just a hose reroute. El Dorado County requires a site plan for many of these projects. We walk your septic layout before we quote so the design works the first time. Call (877) 610-1318 for a free estimate that accounts for your well and septic placement.
Get a Free Kitchen Remodeling Estimate in Cameron Park
We’ll meet you at your kitchen, walk the layout, check your panel, check your parcel, and talk honestly about what your project will cost. No pressure, no contract on the first call. Written scope, written allowances, written change orders before any change touches the job. Call (877) 610-1318 today.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Cameron Park and El Dorado County since 1998.