Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Winton
Fence installation in Winton, CA typically runs $3,500 to $9,000 for a standard residential yard, with vinyl and aluminum on the upper end and basic chain link below that. We serve every street in the 95388 zip code, from Santa Fe Drive over to the neighborhoods off Almond and down past the newer subdivisions near Applegate Road. Because Winton is unincorporated Merced County territory, every fence permit flows through the county building department, not a city hall counter, and our crew plans for that from day one. Call (877) 610-1318 and Tom or one of his sons will pick up.
Why Barrett & Sons Construction Is Winton’s Preferred Fence Installation Company
We’ve been building fences in Winton long enough to know which lots fight you and which don’t. The clay soil here swells when the winter rain hits and shrinks hard through a 100°F July. Set a post without accounting for that and you’ll have a leaning fence before the second summer. Our crew digs post holes 30 inches deep, drops a gravel base in the bottom, and pours concrete collars wider at the top than the bottom so the heave can’t grab hold and twist the post out of plumb. That’s not in a spec sheet anywhere. It’s just what works on San Joaquin Valley clay.
When you call us about a fence in Winton, you’re not getting a call center and a stranger in a van two weeks later. You’re getting a live person on the phone, and Tom Barrett’s name and license number are published and verifiable before anyone sets foot on your property. We answer 24 hours a day. If a windstorm knocks a section down at midnight, a real human picks up.
Every job comes with a written contract that includes permits pulled and inspections signed where Merced County requires them, written change orders before any scope changes, and our 90-Day Done Right Promise. If something isn’t right, one call brings Tom back. No fine print. It’s written on the contract.
Our Fence Installation Services in Winton
Wood Fence
Wood is still the most common fence we build in Winton, especially around the 1950s and 1970s ranch homes that make up so much of the housing stock here. Cedar and redwood both hold up well, but the real difference is what’s below ground. We set wood posts in gravel with a concrete collar, never dirt backfill, because Winton’s shrink-swell clay rots posts from the moisture line down within five to seven years if they’re set wrong. A 6-foot redwood privacy fence on a standard Winton lot is the most requested project, and most come in between $3,500 and $7,000 depending on gate count and linear feet.

Chain Link Fence
On the small-lot manufactured home parcels common in Winton, galvanized chain link is often the practical choice. It’s the least expensive option, it doesn’t care about the clay, and it keeps dogs in and foot traffic out without creating a solid wall that makes a modest yard feel smaller. We also use it a lot for temporary enclosures around county-permitted renovation work. Expect $2,000 to $4,500 for a full residential perimeter with a walk gate.

Vinyl Fence
Vinyl is the fastest-growing request we get from Winton homeowners in the newer subdivisions off Applegate Road. It never needs paint, it won’t rot, and it looks clean against the fresh stucco going up out there. The catch with vinyl on Winton clay is that the panels have no flex. If a post heaves, the panel pops out or cracks. That’s why we sink vinyl posts deeper and pour wider collars than the manufacturers’ generic instructions call for. A full vinyl privacy fence typically runs $3,500 to $9,000 in Winton, influenced heavily by how many gates you need and whether HOA rules dictate a specific profile.

Aluminum Fence
Aluminum fencing is the right call for Winton properties where the homeowner wants a barrier without a solid wall: around front yards, around pools, or as a lot-line definition in HOA-governed communities. It’s rustproof, lightweight, and handles the valley sun without fading for years. We install residential and light commercial aluminum rail systems, and most Winton jobs land between $4,000 and $10,000. Post depth matters here too, even though aluminum weighs less than iron, and we set every post for clay soil conditions.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Winton
We don’t put mystery materials in the ground. For fence work, we run Quikrete concrete in every post hole, mixed on site, not whatever bag is on sale at the big-box. And when a Winton project includes hardscape elements at the fence line, a gate apron, a run of paver edging at the bottom of a vinyl panel, we work with Techo-Bloc and Cambridge Pavers because their colors and tolerances stay consistent from skid to skid. If your fence project touches pavers, a driveway extension, or a walk gate landing, ask us and we’ll get the right materials in before the crew starts digging.
Common Fence Installation Problems We See in Winton Homes
- Posts set directly into clay without gravel or a collar. Winton’s expansive clay grabs posts and rots them at the moisture line within five to seven years. We’ve pulled rotted posts out of the ground on Santa Fe Drive that were only six years old, set in raw dirt by a contractor who never worked valley clay before.
- Skipped county permits triggering stop-work orders. Merced County requires a fence permit in unincorporated Winton, and inspectors cover a huge rural territory. Contractors who skip the permit often get caught, and the homeowner eats the redo. We pull the permit before the first auger turn.
- Change orders that never hit paper. Gate hardware, taller panels, post caps, adding a second walk gate: these all change the price. You’ll get ours as a written change order before anything changes, every time.
- HOA violations in the newer subdivisions. Several Winton communities with newer builds have architectural review boards with rules about fence height, material, and color. If we build it and the HOA flags it, that’s on us, so we check the HOA’s standards before we order materials.
We should also be direct with you about something most contractors won’t say: Winton’s winter tule fog can shut down a fence job for two or three days at a stretch, not because we can’t work, but because a fog bank so thick you can’t see the auger isn’t safe to run power tools in. We schedule around it, but if your project lands in a foggy stretch, we’ll tell you up front that the schedule may slip a day or two. Better that than a rushed job in zero visibility.
Pricing for Fence Installation in Winton, CA
Here are the two most common fence types we install in Winton, with honest ranges:
| Fence Type | Typical Winton Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Wood privacy fences generally land between $3,500 and $7,000 on a standard Winton lot, and chain link runs $2,000 to $4,500. The biggest drivers are linear feet, gate count, post depth adjustments for clay soil, and whether Merced County requires engineered details on a retaining fence or unusual setback. You’ll get a written line-item estimate before any work starts, and if the scope changes, you’ll get a written change order first. We also honor a Senior & Veteran 10% discount on every fence project, and a Free Second Opinion on any written estimate you’ve received from another contractor. Call (877) 610-1318 to schedule a free estimate.
We installed a 6-foot vinyl privacy fence for a homeowner on a small lot off Santa Fe Drive where the county building department required a permit and a final inspection sign-off before we could call the job complete. The expansive clay soil made setting posts 30 inches deep with extra concrete collars necessary to resist heave, and the crew adjusted the punch list after the inspector’s rural-route visit. The project stayed within the owner’s $6,200 budget and was finished two days after the inspector’s sign-off.
We Also Serve Cities Near Winton
Our fence crews work throughout the surrounding area, including Fence Installation in Winton, Livingston, Delhi, Hilmar-Irwin, and Turlock. If you’re in one of those communities and need a fence that stands straight through the valley’s clay seasons, call us and we’ll schedule a free estimate. For more detail on our full range of fence work, see our Fence Installation services page.
Serving Winton, CA - Our Local Coverage Area
We’re based in the Winton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Winton
Yes. Winton is unincorporated, so Merced County requires a fence permit regardless of whether your HOA also has architectural rules. In our experience, the HOA review may add a few days to the front end, and the county inspection adds 3 to 5 business days at the back end, since county inspectors cover broad rural routes. We handle both the county permit and the HOA coordination before the first post goes in. Call (877) 610-1318 and we’ll walk you through what applies to your street.
Winton’s expansive clay shrinks in summer and swells in winter, so we set posts a minimum of 30 inches deep instead of the typical 24, and we pour a concrete collar that’s wider at the bottom and flared at the top rather than a straight cylinder. This resists heave and keeps standing water away from the post. We also add a gravel base at the bottom of every hole for drainage. For an exact recommendation on your lot, call us for a free estimate.
Most residential fence jobs in Winton take three to five working days of labor, but the full timeline including Merced County permitting and inspection adds 3 to 5 business days beyond the build itself, and fog delays in winter can stretch that further. We schedule the inspection as soon as the posts and panels are in and adjust the final punch list after the inspector’s visit. You’ll get a written schedule before we start.
No. Replacing the entire fence essentially means a new fence under Merced County code, and a permit will be required even if the old fence was pre-existing. We pull the permit and schedule the inspection as part of every vinyl replacement in Winton. It’s a few extra days, but skipping it can mean a stop-work order and redoing post layout at your expense. Call (877) 610-1318 and we’ll confirm what applies to your replacement.
Some do. Several newer communities off Applegate Road and the surrounding subdivisions have architectural standards that specify fence height, material, and finish, and a few restrict wood privacy fences in favor of vinyl or aluminum profiles. Before we order materials, we check the HOA’s current standards for your lot and build accordingly. If you already have the HOA documents, bring them to the estimate and we’ll use them.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Winton and the surrounding Merced County communities.







Before
After
Before
After
Before
After