Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Venice
Fence installation in Venice, CA typically runs $3,500 to $9,000 for a standard residential project, with aluminum and vinyl on the higher end of that range. The real variable here isn’t lumber prices or labor rates – it’s whether your property falls inside the California Coastal Zone, because that one detail changes your permit timeline by months. At Barrett & Sons Construction, we’ve been working Venice’s coastal permitting system long enough to quote a fence honestly up front, including the parts other contractors forget to mention. Call (877) 610-1318 and we’ll walk the property with you, look up the zone maps, and give you a written estimate that actually survives contact with the building department.
We know Venice because we work here. Tom Barrett started this company in 1998, and the crews you’ll see on your job are his sons and the people they’ve trained. We answer our own phones, publish our license number, and don’t hide behind a call center when a permit question comes up. Serving Venice means knowing that a fence quote on the east side of Lincoln Boulevard may need a different permit strategy than one three blocks from the sand.
Why Barrett & Sons Construction Is Venice’s Preferred Fence Installation Company
Our reputation in Venice is built one fence at a time, and most of our work here comes from neighbors walking over to ask who put up the fence down the street. We pull permits on every eligible job – even when it would be faster to skip them – because we’ve seen what happens to Venice homeowners who find out later that their fence was never approved. A red tag from LADBS on a brand-new fence is an expensive way to learn that the Coastal Zone applies to your block.
Venice customers call us because we write everything down. The scope, the allowances, the hardware specs, the staging plan – it all goes on paper before we dig the first post hole. If a surprise shows up once we start, you get a written change order with a price attached before we touch anything. That’s not a corporate policy. That’s Tom keeping a promise he’s kept since before half our competitors had a website.
We stock marine-grade hardware for Venice jobs and we know which suppliers on the westside carry what we need for canal-adjacent properties. When a gate hinge fails two years in because salt air ate a standard galvanized part, that’s a failure we could have prevented on day one. We specify stainless from the start in 90291 and 90294 – not as an upsell, but because it’s what a fence near the beach actually needs.
Our Fence Installation Services in Venice
We offer the full range of Fence Installation services, but three types carry most of the workload in Venice: wood privacy fences, aluminum fences, and the custom gates that bridge the two. Here’s how we approach each in this market.
Wood Fence Installation in Venice
Wood fences dominate Venice, especially redwood and cedar privacy fences on the bungalow-lined streets north of Washington Boulevard. In this climate, the wood itself can last decades if the fastener and hardware choices are right from the start. We use stainless steel nails and galvanized or stainless hinges as standard practice for Venice jobs, because the marine layer laughs at standard hardware within two or three winters.
A 60-foot redwood privacy fence in Venice runs roughly $3,500 to $8,500 depending on height, gate count, and whether your property sits in the Coastal Zone. The wood is the cheap part. The hardware and the permit are where quotes diverge, and we price both honestly up front.
Aluminum Fence Installation in Venice
Aluminum is growing in Venice, especially on the modern teardown-rebuild properties that have multiplied around Abbot Kinney and the Silicon Beach corridor. An aluminum fence handles the salt air better than almost anything else, and the clean lines fit the contemporary architecture. Expect $4,000 to $10,000 for most residential aluminum installations in Venice, with the high end covering larger lots and custom gate work.
The catch in Venice is that aluminum fence panels are often shop-fabricated, so precision on post spacing matters. Our crews measure each run before ordering, because a mis-measured panel on a canal walkway is not a problem you want to solve while hand-carrying a 40-pound panel on foot.
Privacy Fence Installation in Venice
Privacy fences get complicated in Venice. The Coastal Commission and local HPOZ rules often restrict fence height, style, and even the opacity of materials on certain blocks – especially in the Venice Canals Historic District. We know which questions to ask before we quote, because a six-foot solid redwood privacy fence might be perfectly legal on your neighbor’s street and completely off-limits on yours. This is exactly the kind of distinction that separates a real Venice fence contractor from someone reading a spec sheet for the first time.
Chain Link Fence Installation in Venice
Chain link is more common on Venice’s commercial properties and the multi-unit dingbat buildings in the eastern stretches of 90291 and 90294. It’s the most affordable option and handles coastal conditions well when you upgrade to vinyl-coated fabric and stainless fittings. For residential use, some homeowners pair chain link with slats for semi-privacy at a lower price point than a full wood fence.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Venice
We carry and install fencing products from Simonton, Ply Gem, and PGT – brands you can look up, not mystery materials off a van. For Venice’s coastal conditions, we lean on PGT’s aluminum product lines and Ply Gem’s vinyl fencing, both of which hold up well to salt and humidity. When you get a quote from us, the brand names are on the paper. If you’re comparing estimates, ask the other guy to do the same and see what happens.
Common Fence Installation Problems We See in Venice Homes
- Coastal Zone permit surprises. A contractor quotes a fence without checking whether the property is in the Coastal Zone, never pulls the CDP, and LADBS red-tags the installed fence. Now the homeowner pays for removal, a new permit, and a new fence. We check zone maps before we quote, not after we’ve started digging.
- Salt-air corrosion on standard hardware. Galvanized nails and gate hinges corrode in Venice’s marine layer within two years, causing gate sag and loose pickets by the first wet winter. We specify marine-grade stainless as standard for every Venice fence, not as a premium add-on.
- Canal walkway staging citations. Contractors stage materials on a pedestrian canal walkway without checking city rules, get cited, and pass the fine to the homeowner as an unapproved change order. Our staging plan is written into the scope and priced before we set foot on the walkway.
- Historic district height limits. Fences in the Venice Canals Historic District face HPOZ restrictions on height, style, and material. Quote a stock six-foot fence without checking the HPOZ overlay, and you’ll be rebuilding it shorter at your own expense.
Pricing for Fence Installation in Venice, CA
Here’s what fence installation actually costs in Venice, with the two most common residential materials broken out. These ranges reflect our real quotes for this market, including the marine-grade hardware and Venice-specific permitting we’ve already covered. What moves the number most: fence length, gate count, whether you’re in the Coastal Zone or a historic district, and access challenges like pedestrian-only walkways or narrow alleys.
| Fence Type | Typical Venice Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Wood privacy fences fall inside that $3,500 to $9,000 window for most residential projects. Chain link runs lower. Every quote we give is a written, line-item scope, and if anything changes mid-job, the price change arrives as a written change order before we move. Call (877) 610-1318 for a free estimate – no trip charge inside the county.
We Also Serve Cities Near Venice
Our crews work throughout the westside, and Venice is home base for many of them. We regularly serve Fence Installation in Venice and the surrounding communities, including Santa Monica, Culver City, Ladera Heights, and Century City. If you’re a few blocks over the city line, the same crew and the same standards apply.
Serving Venice, CA - Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Venice
In most of Venice, yes – even a straight fence replacement can trigger a Coastal Development Permit (CDP) from the California Coastal Commission, on top of standard LADBS permits. This dual-track approval takes three to six months in many cases, which is why a fence quote that ignores the Coastal Zone is not a real quote. Call (877) 610-1318 and we’ll check your address against the zone maps before we give you a price and a timeline.
We hand-carry them from the nearest street-accessible alley, which is exactly what our crew did on a redwood privacy fence in the Venice Canals Historic District where no truck could reach the property. We price the extra labor into the scope of work up front, so the logistics don’t become a surprise change order at the end. It’s slower and it costs more, but pretending otherwise is how homeowners get stuck with a bill they never saw coming.
The HPOZ overlay in the Venice Canals Historic District (designated 1982) restricts fence height, style, and materials, and exterior changes to older structures get an extra layer of review. We navigate both the HPOZ layer and the Coastal Commission approval process for canal-adjacent work, and we write the staging plan and any HPOZ-driven restrictions into the scope before we bid. Call (877) 610-1318 for a free estimate, and ask us to walk the site before you commit to any design.
Privacy fences are allowed in some parts of Venice and restricted in others, depending on your specific street, the Coastal Zone overlay, and any historic district designation. A solid six-foot fence that’s fine on a bungalow lot east of Lincoln Boulevard may not fly on a canal-adjacent property or within the HPOZ. The honest answer requires checking your address’s specific overlay before you design the fence, which is part of every estimate we give.
Use marine-grade stainless steel for all fasteners, hinges, and gate hardware – standard galvanized parts will corrode in Venice’s salt-laden air within two years and trigger loose pickets and gate sag by the first wet winter. We specify stainless hardware as standard practice on every Venice fence, not as an upgrade, because it’s what a fence near the beach actually needs to last. Call (877) 610-1318 and we’ll show you the difference on paper.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Venice and the westside with straight answers since 1998.