Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Shadow Hills
Fence installation in Shadow Hills typically runs $3,500-$9,000 for a standard residential wood or chain link fence, with aluminum coming in at $4,000-$10,000. The bigger variable here isn’t the fence style, it’s the fire code. Shadow Hills sits inside the City of LA’s Very High Fire Hazard Severity Zone, so materials and setbacks follow California Chapter 7A rules most valley neighborhoods never have to think about. We know the inspectors, we know the overlay rules, and we’ll get the permit right the first time. Call (877) 610-1318 for a free estimate.
Why Barrett & Sons Construction Is Shadow Hills’s Preferred Fence Installation Company
We’re not a franchise dispatching strangers from three counties away. Tom Barrett started this company in 1998, and his sons run the crews. When a Shadow Hills fence job goes sideways because the Equestrian Overlay setback wasn’t caught on the first pass, it’s our name on the truck and our phone ringing. We answer it.
Shadow Hills homeowners tend to ask the same two questions on every fence quote: will this pass LADBS inspection, and will the posts hold through Santa Ana season? We answer both in writing. Every scope, every allowance, every price change arrives as a written change order before a single post goes in the ground. Permits pulled, inspections signed, and a 90-Day Done Right Promise written on the contract. If it’s not right, Tom comes back. One call.
We’ve built and repaired fences off Sunland Boulevard, along Wheatland Avenue, and throughout the horse properties east of the Tujunga Wash. That local repetition means we know which LADBS plan checker wants the Chapter 7A materials spec listed on page one, and which equestrian overlay setbacks apply to a corral fence versus a privacy fence along the property line. You don’t learn that from a YouTube video.
Our Fence Installation Services in Shadow Hills
Wood Fence
Wood privacy fencing remains the most common request across Shadow Hills, especially for the ranch-style homes built between the 1950s and 1970s that anchor nearly every street. But standard cedar or fir posts and rails won’t automatically pass inspection here. Within five feet of any structure, ignition-resistant or noncombustible materials are required under Chapter 7A. We spec treated, fire-rated materials where the code demands them, and we’ll show you exactly where those zones fall on your property before we order a single board.

Chain Link Fence
Chain link is the workhorse for Shadow Hills horse owners corral fence, dog runs, perimeter lines around tack rooms and hay storage. For corrals and stables inside the Equestrian Overlay Zone, the setback rules matter as much as the materials. A fence line that encroaches on the required clearance triggers a stop-work order, and we’ve seen it happen on properties where the old fence had been there for decades. Grandfathered means nothing once you pull a new permit. We survey the line against current overlay requirements before we dig, not after the posts are set.

Vinyl Fence
Vinyl fencing works well for Shadow Hills homeowners who want privacy without the painting and board replacement cycle of wood. It holds up to dry heat and sun exposure that chews through untreated lumber in a few seasons. Be aware: vinyl isn’t ignition-resistant, so noncombustible structural components are required within the 5-foot defensible space zone. We’ll factor that into the quote so you’re not surprised mid-project. A typical vinyl fence in Shadow Hills runs $3,500-$9,000 depending on linear footage and gate count.

Aluminum Fence
Aluminum fencing suits Shadow Hills properties that want a decorative perimeter without the weight or rust issues of iron. It’s a smart choice along street-facing lines and around pool enclosures. Powder-coated aluminum holds its finish against grit blown in from the Wash, which is more than we can say for cheap hardware-store steel. For fire-zone compliance, aluminum posts and rails meet noncombustible requirements where they apply. Expect $4,000-$10,000 for a typical Shadow Hills aluminum fence project.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shadow Hills
We stock and install materials from brands our crews trust, and that means Fence Installation built with products you can look up before you sign anything. For Shadow Hills fence jobs, that often means Schluter trim profiles on gate post caps and transitions, or GAF-rated underlayment details where fencing meets rooflines and shade structures on larger horse properties. If a brand matters to you, say so in the estimate, and we’ll spec it in writing.
Common Fence Installation Problems We See in Shadow Hills Homes
- Standard wood posts and rails failing Chapter 7A compliance. Untreated lumber within five feet of a dwelling or accessory structure won’t pass LADBS inspection in Shadow Hills. We use fire-resistant metal posts and ignition-resistant materials in the defensible space zone, then document it for the inspector.
- Equestrian Overlay setback violations stopping work mid-project. A new fence line around a stable or corral that sits too close to the structure or property line triggers a stop-work order. We measure against current overlay requirements before any post hole is dug.
- Posts leaning or toppling after the first Santa Ana season. Shadow Hills gets channeled wind from the Tujunga Wash that will test shallow post depths. We set posts below frost and wind-load depth based on local soil and exposure, and we don’t skimp on concrete footings.
- Rotted wood fencing from decades of dry heat and grit. Many original mid-century fences in Shadow Hills are at the end of their structural life. Our crew replaced a damaged corral and perimeter fence off Wheatland Avenue where years of Santa Ana-driven grit and dry rot had hollowed out the old posts. The fix included fire-rated metal posts and noncombustible wire mesh within the 5-foot zone, plus a coordinated LADBS inspection sign-off to close the equestrian permit. That’s how Shadow Hills jobs actually go.
Pricing for Fence Installation in Shadow Hills, CA
Here’s what Shadow Hills homeowners should budget for a typical fence project, based on the work we’ve actually done across 91040:
| Fence Type | Typical Shadow Hills Price Range |
|---|---|
| Wood Fence | $3,500 - $9,000 |
| Chain Link Fence | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
What moves the number is linear footage, gate count, terrain slope, and whether your fence line falls inside the VHFHSZ defensible space zone or the Equestrian Overlay setback area. Both add materials and inspection time. We write allowances into every contract so a code-required upgrade is priced before we touch it, not billed after. Call (877) 610-1318 for a free estimate with line-item pricing.
We Also Serve Cities Near Shadow Hills
Barrett & Sons regularly works across Shadow Hills and the surrounding foothill communities, including Sunland, Tujunga, La Crescenta-Montrose, and Burbank. If you’re just over the line in any of those towns, the same crew, the same written change order process, and the same 90-Day Done Right Promise apply. Our scheduling is coordinated from the Los Angeles office; our crews serve Shadow Hills locally.
Serving Shadow Hills, CA - Our Local Coverage Area
We’re based in the Shadow Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Shadow Hills
Yes, in most cases even a like-for-like replacement still requires an LADBS permit because Shadow Hills falls inside the City of LA’s Very High Fire Hazard Severity Zone. The permit triggers a Chapter 7A material review, and if the old fence had untreated wood within five feet of any structure, you’ll likely need ignition-resistant components. Call (877) 610-1318 and we’ll tell you what your specific property needs before you spend a dollar.
Within five feet of any dwelling or accessory structure, wood fence components must be ignition-resistant or noncombustible under California Chapter 7A. That usually means fire-treated lumber for rails and boards in the defensible space zone, and noncombustible metal posts. Outside the five-foot zone, standard wood is generally fine. We spec both zones on every Shadow Hills quote so you see exactly where the code line falls on your property.
Setbacks for stables, tack rooms, and corrals in the Equestrian Overlay Zone vary by lot size and structure type, but they’re tighter than standard residential fence setbacks. The only way to know your exact number is a site survey against current LADBS overlay maps. We do that before we order any materials because re-setting a fence line after a stop-work order costs real money.
Not if any part of the corral fence falls within five feet of a structure. Chain link is already noncombustible, which helps, but the posts, gates, and any attached wood elements inside the five-foot zone still need to meet Chapter 7A standards. We’ve replaced post and rail corrals off Wheatland Avenue where the fix required noncombustible mesh and fire-rated posts to pass inspection. Call (877) 610-1318 and we’ll walk your property.
It can, and this is the quirk of Shadow Hills that catches people off guard. If your fence project touches both the dwelling perimeter and any equestrian accessory structure, you may be pulling one permit for the residential fence and a second track for the equestrian overlay compliance. We handle both applications and coordinate the inspections so they close out together. It’s extra paperwork, but it’s the only way to keep a Shadow Hills fence job from stalling at final sign-off.
Need a straight answer on your fence? Call (877) 610-1318 for a free estimate. Tom or one of his sons will walk the line with you, write up the scope, and hand you a number that won’t change unless you change it.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Shadow Hills with name-on-the-truck accountability since 1998.







Before
After
Before
After
Before
After