Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Pleasant Hill
A new fence in Pleasant Hill typically runs $3,500 to $9,000 for most residential yards, depending on material, grade, and what’s under the grass. On the hillside lots north of Contra Costa Boulevard, pricing trends toward the top of that range because of the clay. We’ve been building fences here long enough to know which streets heave and which ones hold. Call us at (877) 610-1318 and we’ll come out, walk the line with you, and write a quote that accounts for Pleasant Hill’s dirt before we ever sink a post.
What makes Barrett & Sons different on fence work is what we don’t skip. We scope the whole job in writing before pricing: permit needs, post depth for your specific clay, drainage around the new line, and what happens at the property corners. That’s the difference between a quote that survives the dig and one that gets “amended” at the door. More on that below.
Why Barrett & Sons Construction Is Pleasant Hill’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998 and still puts his name on every truck. His sons run the fence crews. That matters in Pleasant Hill, where homeowners tell us the same stories: a national outfit quoted one number, showed up with another, and disappeared when the fence started leaning. We don’t play that game. The price we write is the price you pay, and every change arrives as a written change order before work begins.
We answer our own phone. When you call (877) 610-1318, a live person picks up, not a voicemail box or an out-of-state call center. Tom’s name, address, and license number are published and verifiable. And our Fence Installation team has been walking Pleasant Hill’s hillside lots and ranch-house rear property lines long enough to know where the trouble hides.
Our customers in Pleasant Hill often mention the 90-Day Done Right Promise. It’s written on every contract, not buried in fine print. If something isn’t right, Tom comes back and makes it right. One call. That’s the whole promise.
Our Fence Installation Services in Pleasant Hill
The neighborhoods off Contra Costa Boulevard and Taylor Boulevard weren’t built for one kind of fence. Different lots, different clay, different needs. Here’s what we handle most often across the 94523 ZIP.
Privacy Fence
Privacy fence is the most common request we get from Pleasant Hill ranch homes, especially where backyards face each other across 1950s lot lines. Those original redwood fences are old, and the clay has shifted many of them out of true. We build tight, solid privacy fences that handle the wet/dry cycle here, using post depths and footing details that don’t assume flat, stable ground. In Pleasant Hill, assuming stable ground is the fastest path to a leaning fence.

Vinyl Fence
Vinyl makes sense for Pleasant Hill homeowners who don’t want to strip and stain a wood fence every few years, particularly on the larger lots near the northern and eastern hillsides where fence runs stretch past 200 linear feet. A vinyl privacy fence in Pleasant Hill runs $3,500 to $9,000 for a typical residential job. The real key is what’s below the vinyl. We set posts deep in gravel-drained piers so the visible panels stay straight while the clay below does its seasonal dance.

Chain Link Fence
Chain link is practical on Pleasant Hill lots where the main concern is keeping pets in and deer out, especially on open-acreage properties toward the edges of the city. We install galvanized and vinyl-coated chain link with proper tensioning and set the terminal posts in concrete piers deep enough to resist the heaving clay along fence runs that cross drainage swales. Chain link doesn’t hide anything, but it lasts if the posts are right.

Aluminum Fence
Aluminum fence suits Pleasant Hill homes where owners want the look of iron without the rust, common around the front yards and pool enclosures we see throughout the city. Aluminum fence installation in Pleasant Hill runs $4,000 to $10,000 depending on grade, panel height, and number of gates. We use aluminum in the correct gauge for hillside installations where wind and soil movement can rack lighter materials.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pleasant Hill
We’ve built fence lines while integrating materials from brands like Techo-Bloc and Oldcastle where fence and hardscape interface, such as retaining wall and fence transitions on hillside lots. Quikrete concrete products show up in our post-footing mix by name, because post footings are not the place to save three dollars on generic bag mix. If a Pleasant Hill homeowner is repairing or extending an existing fence from a brand we stock, we can typically match materials without ordering from 200 miles away, which keeps turnarounds shorter than you’d expect for a custom fence job.
Common Fence Installation Problems We See in Pleasant Hill Homes
- Posts heaving from the clay. Diablo Valley expansive clay swells with winter rain and shrinks in summer heat. Shallow posts set in concrete plugs get pushed up and tilted within two winters. We see this more inland than in coastal Bay Area towns because the wet/dry swing is sharper here.
- Sagging gates on hillside lots. Gate posts set for flat, stable ground work fine in the flats, but on the slopes north of Highway 680, the ground moves a little every year. A gate that sags within 12 months was usually sized for a different lot.
- Erosion under the fence line. Runoff from an ungraded yard or open lot can wash out the base of a fence, leaving gaps under the panels. Pets and wildlife find those gaps in about a day. Heavy winter rains in Pleasant Hill make this worse on the hillside streets.
- Old redwood rot at the post base. Many Pleasant Hill homes still have original 1950s and 1960s redwood fences. The post bases rot at ground contact, and the fence starts to lean as one post fails. This is a repair we do often, not a full replacement, and we’ll tell you which one you actually need.
Pricing for Fence Installation in Pleasant Hill, CA
On a typical Pleasant Hill lot, a residential fence installation runs from about $3,500 to $9,000, with material choice driving the biggest swing. Here’s how that breaks down.
| Fence Type | Typical Pleasant Hill Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
What pushes a fence toward the top of that range in Pleasant Hill isn’t usually the material. It’s the dirt. Hillside lots with expansive clay need deeper post piers, sometimes helical anchors, and additional drainage steps. Older ranch lots whose fence lines cross old tree roots or buried concrete need more labor. We walk the line before we write the number, so the estimate reflects what we’ll actually encounter. Call (877) 610-1318 for a free estimate without any pushy follow-up.
We Also Serve Cities Near Pleasant Hill
In addition to Pleasant Hill, our fence crews work regularly in Contra Costa Centre, Waldon, Concord, and Walnut Creek. If your property sits near the edges of any of those communities, call us at (877) 610-1318 and we’ll tell you whether we cover your street and when we can start.
Serving Pleasant Hill, CA - Our Local Coverage Area
We’re based in the Pleasant Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Pleasant Hill
On many Pleasant Hill hillside lots, especially those north of Contra Costa Boulevard with more than a modest slope, yes, you may need a county-led review because of slope and setback requirements, not just city permit review. We pull every eligible permit ourselves. The permit inspector works for you, not for me, and that’s why the process protects you. Call (877) 610-1318 and we’ll check your specific lot before you spend a nickel.
On flat Pleasant Hill lots, post holes around 24 inches deep are often sufficient. On the hillside clay streets where shrink-swell movement is continuous, we go to 30-inch piers with gravel drainage and sometimes helical anchors depending on the grade. Post depth is not a one-size number here. Our crews set posts to the depth your specific lot’s soil requires.
Gates sag in Pleasant Hill because the post base moves, not just because the hinges are weak. Hillside clay expands and contracts seasonally, and if the gate post isn’t braced or anchored for that movement, the whole gate drifts. We size gate posts, brackets, and footings for your grade and the gate’s swing weight. That’s the difference between a gate that works for a decade and one that drags in two years. Call (877) 610-1318 for a gate-specific estimate.
Yes, you can, and it happens all the time in Pleasant Hill’s older neighborhoods where ranch homes share long rear lot lines. The first step is confirming the legal boundary line, not just the old fence line, since decades of clay movement may have pushed the posts over by several inches. We coordinate with your neighbor to avoid surprises and pull permits when required. For an exact quote on a shared fence line, call (877) 610-1318.
Yes. A new fence creates a linear barrier that can redirect or trap runoff, and on Pleasant Hill hillside lots north of Contra Costa Boulevard, this can mean water pooling where it didn’t pool before. We review drainage before building and may add gravel bases, French drains, or small grading transitions so the fence doesn’t become a dam. It’s part of the free estimate. Call us and we’ll walk your yard with you.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Pleasant Hill since our first hillside fence job with his crew, standing behind every post we set.







Before
After
Before
After
Before
After