Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Melrose Park
Fence installation in Melrose Park, FL typically runs $3,500 to $9,000 for a standard backyard perimeter, and the material choice matters more here than almost anywhere else in Broward County. Salt air off the Intracoastal Waterway eats through standard galvanized hardware within a few seasons, so we spec stainless steel brackets and hot-dip galvanized fasteners that inland installers never think about. Our Fence Installation crew knows the county permit process cold, because Melrose Park is unincorporated and every job runs through Broward County’s Building Division rather than a city hall. Call (877) 610-1318 and Tom Barrett will answer the phone himself, talk through your fence line, and schedule a free on-site estimate with no trip charge inside the county.
Key Takeaways:
- Melrose Park fence installation averages $3,500-$9,000 depending on material and linear footage.
- Salt air corrosion is the #1 local failure mode for fences here; coastal-grade hardware matters.
- All Melrose Park fence permits run through Broward County, with 36-inch minimum post depths.
- Barrett & Sons is owner-operated, founded in 1998, and every fence job carries the 90-Day Done Right Promise.
Why Barrett & Sons Construction Is Melrose Park’s Preferred Fence Installation Company
We’ve been replacing and installing fences in Melrose Park long enough to know exactly what fails first out here. It’s almost always the hardware, not the panels. The aluminum posts that look fine at installation start blooming white powder at the concrete line within five years if someone used plain zinc brackets. That’s a callback we don’t want and you shouldn’t pay for. So we don’t do it. Every fence we build in Melrose Park uses stainless steel post brackets, ring-shank hot-dip galvanized nails, and concrete footings that meet or exceed Broward County’s 36-inch depth requirement before the first panel goes up.
Tom Barrett puts his name, his address, and his license number on every contract. Ask anyone on your street, or look up the license number yourself. This is a family operation founded in 1998, and Tom’s sons run the crews that show up in Melrose Park wearing the Barrett & Sons name on their shirts. They’re background-checked, and they live with the work they do. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail box or an out-of-state call center. When you call about a sagging gate on SW 5th Court, you’re talking to someone who knows where SW 5th Court is.
Our Fence Installation Services in Melrose Park
Aluminum Fence Installation
Aluminum fence is a popular choice in Melrose Park because it holds up better than steel against salt air, but only if the posts are set correctly. We’ve pulled aluminum posts out of the ground here where the bracket had corroded so badly the post wobbled in a 20 mph sea breeze. The fix is simple if you do it from day one: stainless brackets, proper concrete collars, and no aluminum-to-steel contact at the pour line. Aluminum fence installation in Melrose Park runs $4,000 to $10,000 for a typical yard, and the coastal-grade hardware is included in that range when we quote it.
Vinyl Fence Installation
Vinyl privacy fences are common throughout the CBS ranch neighborhoods off Davie Boulevard, but they need expansion gaps. The afternoon sun reflects off concrete block walls and low-slope lots, and rails expand enough to warp and pull out of posts if the installer didn’t leave room. We leave room. Vinyl fence installation in Melrose Park runs $3,500 to $9,000, and we use stainless fasteners even where the panel clips hide them, because salt spray gets everywhere within a few miles of the Intracoastal.
Wood Fence Installation
Wood privacy fences work here if you spec pressure-treated posts and coat every cut end. The original fences on many 1950s and 1960s Melrose Park homes used plain 4x4s and common nails, and they shear at grade once the salt air and ground contact do their work. We set 6×6 pressure-treated posts in 24-inch concrete footings with stainless brackets and ring-shank hot-dip galvanized nails. Wood fence installation in Melrose Park starts around $3,500 and goes up with fence height and gate count.
Chain Link Fence
Chain link is the workhorse for Melrose Park side yards and dog runs, but the tension bars are its weak point out here. Salt spray rusts through the bottom rail connection within three seasons, and the fabric starts sagging and snagging mowers. We upgrade the bottom rail hardware and tension bands to hot-dip galvanized as standard practice in Melrose Park, because the inland spec just doesn’t survive the air out here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Melrose Park
We install and repair fences built with named, verifiable materials, the same way we use GAF roofing and Schluter waterproofing on our other jobs in Melrose Park. You won’t see mystery-brand panels off a van from us. If you have an existing aluminum or vinyl fence from a known manufacturer, we’ll match the product line for repairs so the new section doesn’t stand out. And because we keep common post caps, brackets, and gate hardware on the trucks that serve Melrose Park, most small repairs don’t need a second trip.
Common Fence Installation Problems We See in Melrose Park Homes
- Salt-air corrosion on post brackets. Aluminum fence posts corrode at the concrete line when set with non-stainless brackets. Within five years the white powder blooms and the post wobbles in a 20 mph sea breeze. We spec stainless brackets from day one.
- Snapped wood posts at grade. The original 4×4 posts on 1950s and 1960s Melrose Park homes sheared off at ground level because the galvanized fasteners rotted through from salt exposure. The repair is 6×6 pressure-treated posts set in 24-inch concrete footings with stainless hardware.
- Warped vinyl rails on the afternoon sun side. Reflected heat from CBS walls and low-slope lots makes vinyl expand enough to pull rails out of posts if the installer didn’t leave gaps. We leave them on every panel.
- Chain-link tension bars rusted through at the bottom rail. Salt spray settles low, and the fabric sags within three seasons. The upgrade is hot-dip galvanized bands and tension bars, which costs a little more up front and a lot less over time.
Pricing for Fence Installation in Melrose Park, FL
Here’s what a Melrose Park fence actually costs right now. These ranges reflect material, labor, coastal-grade hardware, and Broward County permit fees:
| Fence Service | Melrose Park Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Fence Repair | $400 - $1,800 |
What moves the price is linear footage, gate count, post depth requirements, and the coastal hardware allowance. A fence with plain galvanized brackets might come in $1,200 cheaper on paper from an inland installer, but you’ll pay for that difference within a decade when the posts start leaning. We price the coastal spec the first time, in writing, with a change order for anything that shifts mid-job. Estimates are free. Call (877) 610-1318 and we’ll walk the fence line with you before you commit to anything.
We Also Serve Cities Near Melrose Park
Our fence crews work throughout Melrose Park and the surrounding Broward County communities, including Fort Lauderdale, Broadview Park, Davie, and Lauderhill. Same coastal hardware standards apply whether your fence line is off Davie Boulevard or closer to the Intracoastal. Dispatch and scheduling are coordinated from our Miami area office, and the crews serving Melrose Park are local and familiar with the county permit process.
Serving Melrose Park, FL - Our Local Coverage Area
We’re based in the Melrose Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Melrose Park
Yes. Melrose Park is unincorporated, so every fence replacement runs through Broward County’s Building Division, not a city hall. That means a permit, an inspection, and a 36-inch minimum post-footing depth requirement. We pull the permit, dig to spec, and have the county inspector sign off before the pour. Call (877) 610-1318 and we’ll handle the paperwork as part of your estimate.
Broward County requires a minimum 36-inch post-footing depth for fence installation in Melrose Park. Neighboring cities like Oakland Park or Fort Lauderdale may have shorter requirements, but the county standard is what applies here. We set 6×6 posts in 24-inch concrete footings at a 36-inch depth so the inspection passes the first time, and we don’t pour until the inspector approves the hole.
Only if the installer used non-stainless brackets or let aluminum touch steel at the post line. Aluminum itself won’t rust, but the connecting hardware will, and salt air accelerates it. We’ve seen white powder blooms and wobbling posts within five years on Melrose Park fences that used plain zinc hardware. Our standard spec for this area includes stainless steel brackets and no dissimilar metal contact. Call (877) 610-1318 for a free estimate on a fence built for salt air.
Because a fence built with inland-spec hardware fails early out here, and we’d rather tell you the real number up front than hand you a surprise invoice later. The coastal allowance covers stainless steel post brackets, hot-dip galvanized ring-shank nails, and upgraded tension hardware that survives the salt spray within a few miles of the Intracoastal. On a typical Melrose Park fence, that runs about $1,200 more than the plain-galvanized version, and it saves you the cost of replacing wobbly posts within a decade. The allowance is written on every contract before work starts.
It’s common, but it shouldn’t be. The original 4×4 posts on many 1950s and 1960s Melrose Park homes were set shallow with common galvanized nails, and salt air plus ground moisture corroded the connection until the post sheared at grade. The repair is 6×6 pressure-treated posts in 24-inch concrete footings with stainless brackets. On a 1962 CBS ranch off SW 5th Court, we replaced exactly that failure, and the county inspector signed off on the footing depth before we poured. Call (877) 610-1318 and we’ll come take a look at your fence line for free.
Get Your Free Melrose Park Fence Estimate
A fence is a five-figure decision for most yards, and you deserve a number you can rely on before you sign anything. Tom Barrett will walk your fence line, show you where the old hardware failed and why, and hand you a written line-item quote that includes the coastal hardware allowance, permit fees, and the 90-Day Done Right Promise on the contract. No trip charge inside the county. Senior and veteran discounts are 10%, and second opinions on any written estimate are always free. Call (877) 610-1318 to schedule your free estimate in Melrose Park today.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Melrose Park and greater Broward County since 1998.