Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Los Angeles
Fence installation in Los Angeles typically runs $4,130 to $10,620 for a standard vinyl or wood fence, with hillside and fire-zone properties pushing toward the higher end once engineering, drainage, and Chapter 7A materials enter the picture. Most Los Angeles fence jobs we take on involve more than digging post holes: the city’s slope, fire, and seismic codes all intersect at the property line. That’s why you want a crew that knows the difference between a flat-lot fence in the Valley and a hillside job off Mulholland. Call (877) 610-1318 and we’ll walk the site, check the code layers that apply to your parcel, and give you a written line-item quote before anything gets ordered.
We’re Barrett & Sons Construction, owner-operated since 1998. Tom Barrett’s name is on the truck and the license, and the crews are his sons and their teams, not a rotating cast of subs. When you call about a fence in Los Angeles, you’ll talk to someone who actually knows what the city’s plan-check staff will ask for on your street. That matters more here than almost anywhere else in the country.
Why Barrett & Sons Construction Is Los Angeles’s Preferred Fence Installation Company
Ask anyone who’s pulled a fence permit in Los Angeles: the paperwork alone can eat a month if you don’t know which counter to visit or which ordinance your parcel falls under. We do. Our scheduling and dispatch run out of our Los Angeles office, so when you call, you’re reaching a local operation, not an out-of-state answering service. A live person picks up 24 hours a day. When a Santa Ana wind event tears through your fence at 2 a.m., you’ll get Tom or one of his sons on the line, not a voicemail box.
Los Angeles homeowners come to us after national outfits hand them a phone quote and then a different bill once the crew shows up. Our approach is the opposite: every scope item, every allowance, every price change arrives as a written change order before a single nail moves. The allowance that isn’t on paper is a surprise waiting for a date. That’s been our rule since 1998, and it’s why our Fence Installation customers in neighborhoods from Silver Lake to Tarzana keep our number in their phones for the next job.
We pull permits and get inspections signed on every eligible Los Angeles fence job. Not because the city always requires one for a flat-lot replacement, but because the permit inspector works for you, not for me. That’s why I like him. If there’s a code issue on your hillside or in your fire zone, the inspector finds it before it becomes a $9,000 surprise. We’d rather have that conversation before concrete goes in the ground.
Our work on Los Angeles homes carries a 90-Day Done Right Promise, written on every contract, not buried in fine print. If it’s not done right, Tom comes back and makes it right, one call. We also honor a permanent 10% senior and veteran discount, and we never charge a trip fee inside Los Angeles County. No trip charge means no charge, period.
Our Fence Installation Services in Los Angeles
Wood Fence
Wood fencing remains the most common choice across Los Angeles, from Craftsman bungalows in Highland Park to mid-century ranches in the San Fernando Valley. We build with pressure-treated posts and cedar or redwood pickets sized for local wind exposure, because a 6-foot privacy fence in an open Valley lot takes a beating that a shaded Westside fence never sees. On hillside parcels, we add drainage behind the fence line and use steel post anchors instead of setting wood directly into saturated slope soil.
Chain Link Fence
Chain link is the workhorse for Los Angeles side yards, utility runs, and commercial properties around Koreatown and Echo Park. The key here is galvanized hardware and post concrete mixed for the wet-dry cycle: Los Angeles soil expands and contracts through drought and atmospheric river seasons, which is why cheap chain link installed by day-labor crews starts sagging at the gates within two or three years. We also configure chain link to meet LADBS clearance rules where it abuts alleys or fire access lanes.
Vinyl Fence
Vinyl fence installation in Los Angeles runs $4,130 to $10,620 depending on linear feet, gate count, and whether your parcel triggers slope or fire-zone requirements. Vinyl handles our UV exposure well when it’s manufactured with adequate titanium dioxide stabilizers; cheap vinyl turns chalky and brittle in five years of Southern California sun. We order from suppliers whose specs we’ve verified for Los Angeles UV and wind loads, and we write every allowance into the contract so the vinyl grade we quote is the vinyl grade that shows up on your driveway.
Aluminum Fence
Aluminum fencing runs $4,720 to $11,800 in Los Angeles and works well around pools, where LADBS and county health codes impose specific gate and latch requirements. Aluminum won’t rust in irrigation-heavy zones or coastal air the way uncoated steel will, and it’s lighter to handle on hillside access paths where a crane can’t reach. In fire hazard zones, aluminum is also a smart choice near structures where wood fencing within five feet of the house would trigger Chapter 7A noncombustible requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
When we install aluminum or vinyl fence systems around Los Angeles, we work with brands like Simonton, Ply Gem, and PGT, materials you can look up yourself before you sign anything. We don’t show up with mystery-brand panels off a van. For Los Angeles customers, that means faster turnaround when a gate hardware order needs to match an existing line, and a warranty chain that actually has someone standing behind it. If you’re in the middle of a fence decision, call us and we’ll talk through which brand and grade fits your exposure, your slope, and your code zone.
Common Fence Installation Problems We See in Los Angeles Homes
Los Angeles geography and code create a specific set of fence failure patterns that flatland contractors simply never encounter. Here’s what we fix most often:
- Slope drainage failures: On hillside lots in Bel Air, Tarzana, and the Hollywood Hills, fence posts set in shallow concrete without drainage rot at the base and undermine the slope during atmospheric river events. The fix starts with drainage behind the fence, then a properly engineered post installation, not just new concrete in the same failing hole.
- Chapter 7A violations: In Very High Fire Hazard Severity Zones, wood fencing built within five feet of a structure must meet ignition-resistant construction standards. We see wood fences that predate the current WUI code, and when a remodel or resale triggers inspection, they have to come out and be replaced with noncombustible assemblies.
- Soft-story clearance conflicts: On 1960s soft-story apartment buildings with tuck-under parking, unpermitted fence post holes can compromise seismic retrofit shear walls and fail LADBS inspection. This is a Los Angeles-specific problem tied directly to the Mandatory Seismic Retrofit Ordinance, and it’s the kind of thing a fence contractor who’s never worked here won’t catch until the inspector red-tags the job.
- Rust and gate sag: Non-galvanized hardware in irrigation-heavy or coastal Los Angeles areas rusts through within a few years, causing gate sag and latch failure. We spec galvanized or stainless hardware on every gate, because the cost difference is measured in a few dollars today versus a full gate rebuild in year three.
Pricing for Fence Installation in Los Angeles, CA
Here’s what Los Angeles fence installation actually costs, based on the jobs we quote week in and week out:
| Service | Typical Los Angeles Price Range |
|---|---|
| Vinyl Fence Installation | $4,130 - $10,620 |
| Aluminum Fence Installation | $4,720 - $11,800 |
| Wood Fence Installation | $4,130 - $10,620 |
| Fence Repair | $470 - $2,950 (typical repair scope) |
What moves the number on a Los Angeles fence quote? Linear feet, gate count, post depth, access, and the three local code layers: slope drainage under the Hillside Ordinance, fire zone material requirements under Chapter 7A, and seismic retrofit clearances on soft-story properties. A flat, simple backyard fence in the Valley sits at the lower end. A hillside privacy fence off Mulholland with retaining wall work and engineering stamps sits at the upper end, sometimes slightly beyond. We give you a written line-item quote before you commit to anything, and every change after that arrives as a written change order. Call (877) 610-1318 for your free estimate.
We Also Serve Cities Near Los Angeles
Our crews work throughout Los Angeles and the surrounding communities. You’ll find us on fence jobs in Koreatown, Echo Park, Silver Lake, and View Park-Windsor Hills nearly every week. If you’re anywhere in Los Angeles County, call and we’ll schedule a site walk.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Los Angeles
Yes, in most cases. Fence replacement on a hillside lot in Los Angeles triggers the city’s Hillside Ordinance when the work involves grading, retaining walls, or slope disturbance, and the permit process typically includes drainage review and possibly a soils report. On flat lots where you’re replacing an existing fence in the same alignment without changing height, LADBS may not require a permit, but hillside work nearly always does. We handle the permitting and inspections on every eligible job, so you don’t have to guess which counter to visit. Call (877) 610-1318 and we’ll check your parcel against LADBS requirements before you spend a dollar.
Chapter 7A of the California Building Code means that in Very High Fire Hazard Severity Zones, any wood fence within five feet of a structure must be built with ignition-resistant or noncombustible materials, which usually means replacing wood pickets with fiber-cement, metal, or another approved assembly near the house. The fence line further from the structure may still allow wood if it meets specific clearance and construction requirements. We work with LADBS plan check and the fire department review on these jobs, because missing a Chapter 7A trigger is a costly mistake to correct after inspection. Call (877) 610-1318 for a quote that accounts for your fire zone from day one.
Only with engineering review and LADBS approval, because the post holes can compromise the shear walls that the city’s Mandatory Seismic Retrofit Ordinance requires on soft-story buildings like Los Angeles’s 1960s ‘Tier 1’ apartment stock. You need a structural engineer to confirm that the fence post locations clear the retrofit framing, and you’ll need the appropriate plans reviewed before pulling a permit. We coordinate with structural engineers on these jobs so the fence, the retrofit, and the inspection all come together in one scope instead of two competing scopes. Call (877) 610-1318 and we’ll walk you through what your building will need.
The San Fernando Valley’s cycle of prolonged drought followed by intense atmospheric river rain means the clay soil expands and contracts dramatically, and fence footings that aren’t sized and drained for that movement will heave, crack, and eventually let the post rot at the base. The fix is deeper footings with gravel drainage at the base and, on slopes, drainage behind the fence line. We’ve pulled enough failed footings out of Valley yards to know what the wet-dry cycle does to a fence over five or ten years. Call (877) 610-1318 and we’ll size the footings for your specific soil, not a generic posthole chart.
Your fence contract for a Los Angeles hillside job should include, at minimum: a line-item scope of work tied to your specific parcel, written allowances for materials like engineered retaining wall blocks or Chapter 7A noncombustible assemblies, a written drainage plan if slope work is involved, and a written change order process for anything that arises after excavation begins. If a contractor won’t put allowances in writing, that’s a warning sign. Ours are in every contract we write, and the 90-Day Done Right Promise comes with them. Call (877) 610-1318 and we’ll send you a written quote you can actually read before you sign.
On a hillside lot in Tarzana, we replaced a failing 1950s redwood privacy fence where the original posts were set in shallow concrete without drainage, and years of storm runoff had rotted the bases and undermined the slope. We pulled the old work, installed a soil nail and gravel drain system behind a new pressure-treated retaining wall, then set a cedar fence with steel post anchors and aluminum post caps, all per the Hillside Ordinance and signed off by the city inspector. That’s what a Los Angeles fence job looks like when it’s done right the first time. It’s also why we write the drainage, the retainage, and the inspector’s sign-off into the contract before the first post hole goes in.
Ready to talk about your Los Angeles fence? Call (877) 610-1318 for a free, written estimate. Tom’s name, address, and license number are published and verifiable. Look it up before you sign anything. Then call us. We’ll shake your hand at the hardware store on Saturday and stand behind what we said on Monday.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Los Angeles since 1998.