Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Greenville
Fence installation in Greenville, TX typically runs $3,500 to $9,000 for a standard vinyl or wood yard fence, though acreage projects with multiple gates and long runs push higher. We quote every job after walking the property, because the blackland clay under Greenville changes how deep posts need to go and how gates need to be set. Call (877) 610-1318 for a free estimate, and we’ll come out, measure, and hand you a written scope before you spend a dime.
Barrett & Sons has been building fences across Hunt County for years, and we know what happens when a post hole gets augered into Greenville’s Vertisol clay without accounting for what that soil does between July and March. This is not a town where a generic fence formula works. The clay shrinks in the summer droughts and swells hard after fall rains. If your posts aren’t set below the active zone, your fence line will look wavy by spring. We scope for that before we quote, and we put it in writing.
Key Takeaways
- Fence installation in Greenville typically costs $3,500-$9,000 for vinyl, $4,000-$10,000 for aluminum.
- The blackland clay here heaves aggressively; posts need belled bottoms below the active zone, or they lift 2-3 inches between seasons.
- We serve all Greenville ZIP codes: 75401, 75402, 75403, and 75404.
- Every quote includes a written change order process, so the price you sign is the price you pay.
- Tom Barrett and his sons run the crews. You’ll see the same faces on your fence line that you saw at the estimate.
Why Barrett & Sons Construction Is Greenville’s Preferred Fence Installation Company
Greenville homeowners tell us the same story: a national company quoted one price on the phone, then handed them a different number after the posts were in. That doesn’t happen with us. Every scope of work, every allowance, every price change arrives as a written change order before a single nail moves. Tom Barrett has been running Barrett & Sons Construction since 1998, and his name is on the truck and on the contract. Look up the license number yourself. We publish it.
We answer the phone. When you call (877) 610-1318, a live person picks up, not a voicemail box and not an out-of-state call center. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, but the crews serving Greenville live here in Hunt County. That means when the clay heaves and your gate binds in March, you’re not waiting on a crew from another time zone. We’re local, and we come back.
Our Greenville customers back this up. We carry a strong local reputation across the 75401, 75402, 75403, and 75404 ZIP codes, and a big part of why is our 90-Day Done Right Promise: written on every contract, if it’s not done right, one call brings Tom back. No fine print, no runaround. The permit inspector works for you, not for us, and we like having him on the job because he keeps everyone honest.
Visit our Fence Installation page to see the full range of fencing services we offer across the region.
Our Fence Installation Services in Greenville
We build fences for quarter-acre lots near downtown and five-acre spreads off County Road 2175 alike, and we tailor the scope to the land. Here is what Greenville homeowners call us for most often.
Wood Fence
Wood fence installation in Greenville runs popular along the older neighborhoods in 75401, where craftsman and vernacular frame homes want a cedar privacy fence that matches the character of the house. We use pressure-treated posts set below the clay’s active zone, because untreated or shallow-set posts will tip and warp within two seasons here. On larger lots, we recommend 6×6 posts at minimum for any gate section, and we bell the holes out at the bottom with a full concrete collar.
Chain Link Fence
Chain link holds up fine in dry climates, but Greenville’s blackland clay holds water against uncoated galvanized posts near the creek bottoms in 75403 and rots them at the soil line before the wire shows any wear. We use coated posts and add gravel drainage at the base of every post when we’re fencing near drainage areas or seasonal creeks. If you’re enclosing a dog run or a pasture, we’ll also talk to you about stretching the fence to handle Greenville’s wind gusts off open prairie.
Vinyl Fence
Vinyl fencing is a strong choice for Blackland Prairie soil because it does not absorb moisture the way wood does, so the clay’s wet-dry cycle has less to attack. But vinyl still heaves if the posts are not belled at the bottom. On Greenville properties where homeowners have irrigation running near fence lines, we set vinyl posts deep with concrete collars to resist seasonal movement. Expect vinyl fence installation in Greenville to run $3,500-$9,000 depending on linear feet and gate count.
Aluminum Fence
Aluminum fence installation is common for Greenville homeowners who want a decorative look around the front yard without blocking sightlines, especially on the newer subdivision lots off I-30 in 75402. Aluminum won’t rust in Greenville’s humid springs and summer thunderstorms, but it needs the same post-depth treatment as wood or vinyl because the clay heave does not care what the fence panel is made of. Aluminum runs $4,000-$10,000 on average in Greenville, and gates account for a meaningful part of that number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenville
We carry and install premium-brand materials that you can look up yourself, because a fence is only as good as the post in the ground and the gate hardware on the hinge. For fencing and related backyard work in Greenville, we routinely work with GAF for drainage-adjacent underlayment and Schluter for transitions and trim details where a fence meets a deck or outdoor living surface. No mystery brands off a van. If we quote a brand, we show you the receipt and the product label.
Building on Acreage Around Greenville: What Changes the Price
Greenville sits squarely on the Blackland Prairie, and the Vertisol clay under this town is among the most expansive soil in Texas. It shrinks dramatically during Hunt County’s hot, dry summers and heaves back up after the intense fall and spring rain events. For a fence builder, that means a post hole bored 30 inches deep can shift up to 3 inches between July and March if the pier is not belled below the active zone. A fence line set dead level in August can be visibly wavy by spring. That is not a hypothetical here. It is the defining variable of every fence job in Greenville.
On acreage outside the city limits, the scope changes again. County rather than city permitting applies, and septic and well setbacks dictate where a fence line can run. You cannot set posts through a drain field, and you cannot crowd a wellhead. We check setbacks before we quote, because discovering a septic line after the auger hits it is a five-figure mistake nobody should have to make. Long material hauls and equipment access on open lots also matter: if our auger truck can’t reach the back pasture, we price in the hand-clearing and the time to walk material in. Grading and drainage on an open lot affect how water sheets across the fence line during Greenville’s fall rains, and we scope swales and post drainage before we ever put a hole in the ground.
Outbuildings, shops, and detached structures change the fence plan too. A horse run needs a 16-foot tube gate set on serious posts. A shop needs a wide vehicle gate. We quote all of that line by line, and if the price changes, you get a written change order before the work proceeds. The allowance that isn’t on paper is a surprise waiting for a date.
On a five-acre lot off County Road 2175 in the 75402 corridor, our crew fenced 1,100 linear feet for a new shop and horse run. We had to hand-clear 18 inches of blackland gumbo from the auger flights twice per post, and we set every gate post in a 12-inch-diameter hole with 6 inches of crushed concrete at the base to keep the 16-foot tube gate from sagging when the clay heaved. The owner’s original wood posts from a previous contractor had already tilted 4 degrees after one wet spring. We reset them as part of the new scope of work.
Common Fence Installation Problems We See in Greenville Homes
- Heaved posts from straight augered holes: When posts are set in straight, un-belled holes, the clay’s fall-to-spring wet cycle pushes them up out of the ground. Homeowners see 2-3 inch vertical offsets along the fence line by March.
- Racked and binding gate frames: The hinge-side post settles into clay while the latch post stays put, so gates bind within one season unless both posts share a continuous concrete collar below the frost line.
- Premature chain link rust at the soil line: Greenville’s blackland clay holds water against uncoated galvanized posts, especially near the 75403 creek bottoms. Coated posts and gravel drainage at the base fix this before it starts.
- Septic and well conflicts: On Greenville acreage, we regularly see previous fences run through drain fields or too close to wellheads. We check setbacks on county records before we quote, not after the auger hits something.
Pricing for Fence Installation in Greenville, TX
Greenville fence pricing runs on the square footage of the fence line and the number of gates, but the clay under the lot drives more of the number than most people expect. We price for belled post holes, concrete collars on gate sections, and drainage where the land slopes toward the fence. That is not an upsell. It is the difference between a fence that stays straight and one that waves by spring.
| Fence Type | Greenville Price Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Wood Fence (cedar, typical yard) | $3,500-$8,500 |
| Chain Link Fence (residential) | $2,800-$6,500 |
| Fence Gates (solo or added) | $600-$3,000 per gate |
| Fence Repair (post reset or section) | $400-$2,500 |
What moves the number: linear feet, gate count and width, post depth required by the lot’s soil conditions, whether we’re fencing near a septic system or well, and whether we need to hand-clear brush or gumbo clay. Every quote is free, and every line item is in writing before we start. We also honor a permanent 10% Senior & Veteran discount, and $40 off any repair over $200. Call (877) 610-1318 to schedule your free estimate.
We Also Serve Cities Near Greenville
Our crews serve Greenville and the surrounding Hunt County towns, including Royse City, Fate, Princeton, and Rockwall. If you’re anywhere in this part of Northeast Texas, we’ll drive out, walk the lot, and give you a straight written quote. Learn more about our Fence Installation in Greenville service area and neighboring coverage.
Serving Greenville, TX - Our Local Coverage Area
We’re based in the Greenville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Greenville
Most fence projects on Hunt County acreage outside Greenville city limits do not require a building permit, but setback rules for septic systems and wells still apply, and some subdivisions have their own covenants. We check all of that before we quote. Call (877) 610-1318 and we’ll verify your property’s requirements as part of the free estimate.
In Greenville’s Vertisol clay, posts typically need to go 30 to 36 inches deep with a belled bottom and concrete collar below the active zone to resist seasonal heave. Straight augered holes at 24 inches will lift within one wet season. Call us for a site-specific post-depth assessment.
Yes, and this is a common cause of fence movement on smaller Greenville lots where sprinklers run close to the fence line. Water concentrated near posts accelerates the clay’s swell on one side and pushes posts up unevenly. We can adjust post depth and drainage to compensate. Call (877) 610-1318 for an exact plan.
Vinyl and coated aluminum hold up best in Greenville because they don’t absorb water the way wood does, and coated posts resist the soil-line rust that kills galvanized chain link near creek bottoms. The post-setting method matters as much as the panel material. We quote both together.
Yes, and we do it regularly on Greenville acreage. We map the septic drain field and wellhead setback before we lay out the fence line, and we avoid those zones entirely. No fence post goes through a drain field. Call (877) 610-1318 to schedule a free site walk.
Ready for a straight answer and a written quote? Call Barrett & Sons Construction at (877) 610-1318 to schedule your free fence installation estimate in Greenville. Tom Barrett and his sons will walk the lot, measure, and hand you a written scope with every line item out in the open. If it’s not done right, one call brings us back.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Greenville and Hunt County since 1998.