Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Glendale
Fence installation in Glendale, CA typically costs $3,500-$9,000 for a standard residential yard, and most jobs move from first measurement to finished fence in one to two weeks once permits clear. If you’re calling around with a leaning or rotted fence along Verdugo Boulevard or up in Chevy Chase Canyon, you already know what we’re about to tell you: Glendale’s clay-heavy soil and Santa Ana winds put fences through a beating that flat-valley fencing never takes. We’ve built and repaired fences from Adams Hill to the 91207 hillsides, and we know what holds up and what doesn’t on these streets. Call (877) 610-1318 and we’ll come measure, walk the lot with you, and put the scope in writing before anything gets built.
Why Barrett & Sons Construction Is Glendale’s Preferred Fence Installation Company
Tom Barrett started this company in 1998, and his sons run the crews today. When you call about a fence in Glendale, you’re talking to someone who knows the difference between a lot in Adams Hill with 1920s property pins and a hillside parcel in Montecito Park that’s going to trigger a soils report before we dig a single post hole. That local knowledge saves you money and time, because we don’t show up surprised by what the ground does on your street.
Our reputation in Glendale is something we protect. The name is on the truck, the license number is published, and the same person who answers the phone is accountable for the work. Customers in 91222 and 91226 have trusted us for years, and the feedback we get most often is that the price on the estimate matched the final invoice. That’s not an accident. Every scope change, every allowance, every adjustment comes to you as a written change order before we touch anything. No surprises at the end.
We carry the 90-Day Done Right Promise on every fence job. If something isn’t right after we leave, one call brings Tom back to make it right. That’s written on the contract, not tucked in fine print.
Our Fence Installation Services in Glendale
Wood Fence in Glendale
Wood privacy fence is still the most common choice across Glendale’s flatland neighborhoods, especially around Kenneth Village and Grandview, where Spanish Colonial and Craftsman homes look right with warm cedar or redwood. We build wood fences with pressure-treated posts set below the frost line and properly gravel-bedded for drainage, because Glendale’s clay soil holds water and rots wood from the base up if you skip that step. A standard wood privacy fence in Glendale usually runs $3,500-$9,000 depending on footage, gate count, and whether we’re tearing out an existing fence.
Chain Link Fence in Glendale
For alleys, dog runs, and side yards off Colorado Street, chain link is the practical choice. We install galvanized and vinyl-coated chain link with terminal posts and tension bars done right, not the wobbling corner posts you see on so many older Glendale rentals. Chain link is also the fastest option for a boundary that has to go up quickly, and it’s what we recommend when a property between 91201 and the rail line needs security without blocking sightlines.
Vinyl Fence in Glendale
Vinyl fence handles Glendale’s summers and Santa Ana wind season better than almost anything else. It won’t warp the way unsealed wood does, and it doesn’t need repainting every few years. We install solid vinyl privacy panels and picket styles that have held up well in the 91222 and 91225 neighborhoods, where sun exposure on south-facing backyards is brutal. Vinyl fence in Glendale typically lands in the $3,500-$9,000 range, and it’s earned its place as the fastest-growing choice among homeowners who want a fence they won’t have to think about for 20 years.
Aluminum Fence in Glendale
On hillside lots in ZIPs 91207 and 91208, aluminum fence is often the smartest call because it resists rust and doesn’t trap wind the way solid panels do. A solid privacy fence on a Chevy Chase Canyon slope can act like a sail during a Santa Ana event, and we’ve seen what that does to post footings over time. Aluminum fence installation in Glendale generally runs $4,000-$10,000, and we’ve done enough of it in the Verdugo foothills to know which mounding and panel spacing stands up to the gusts that come off the mountains.
We also build iron fence, fence gates, and commercial fencing throughout Glendale, and our Fence Installation team handles repairs on every style we install. If you’re in Glendale and need a gate matched to existing iron work, we do that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glendale
We don’t put up mystery materials off a van. The fence hardware, fasteners, and systems we install in Glendale come from brands you can look up, and we keep our most-requested components in local stock so a Glendale project doesn’t stall because a supplier is out. Depending on the job, you’ll see Quikrete for post footings and Cambridge Pavers for fence-line borders and walkways where they tie in. Tom Barrett picks materials by what lasts in Glendale’s climate, not by what’s cheapest to buy that week.
Common Fence Installation Problems We See in Glendale Homes
Our crews have walked hundreds of Glendale yards, and the same issues keep showing up. Here’s what we see most:
- Clay-soil rot at the post base. Glendale’s clay-rich soil holds water against the wood, so posts set directly in dirt fail in five to eight years. We always gravel-bed the post hole and use pressure-treated or steel-reinforced bases.
- Santa Ana wind fatigue on hillside fences. The Verdugo foothills in 91207 and 91208 get hit hard, and solid fences built with undersized posts lean within a couple of seasons. We size posts and mounding for wind load, not just looks.
- Property-line confusion on 1920s-era lots. Adams Hill and Grandview properties often have old pins, old surveys, and overlapping claims. We confirm the line before we dig, because a fence on the wrong side of a Glendale property line is a very expensive mistake.
- Rotted fence behind new homes or home remodels. After a Home Additions & ADU in Glendale project, we frequently see old fencing that got torn up during construction and never rebuilt properly. If you’ve got a new ADU with a temporary fence, we can tie the permanent fence into the new structure the right way.
Pricing for Fence Installation in Glendale, CA
A straightforward residential fence installation in Glendale typically costs between $3,500 and $9,000, which covers a standard yard perimeter of 100 to 200 linear feet with one or two gates. Wood privacy fence lands at the lower-middle of that range; vinyl and aluminum run higher because of material cost. What moves the price in Glendale specifically is hillside work: any fence on a graded slope in 91207 or 91208 may require deeper footings, a soils report, and wind-load engineering, which adds real cost compared to a flat lot near the 134. Tear-out and haul-away of an old fence, gate hardware, and city permit fees all factor in. We give every Glendale customer a written, line-item estimate before the first post hole is dug. Call (877) 610-1318 for your free estimate.
We Also Serve Cities Near Glendale
Beyond our Glendale work, we take fence projects in Burbank, La Cañada Flintridge, Echo Park, and Silver Lake. If you’re in one of those areas and want a fence builder who shows up with same crew that gave the quote, give us a call. And when a Glendale fence project includes paving along the fence line or a new walkway to the gate, we also handle Driveway & Pavers in Glendale so the whole job is done by one crew.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Glendale
We’re generally able to schedule an estimate visit within a few days of your call across Glendale’s 91201, 91222, 91225, and 91226 ZIPs. Call (877) 610-1318 and we’ll get you on the calendar.
Yes. We work throughout Glendale, including Verdugo Woodlands, Chevy Chase Canyon, Montecito Park, Adams Hill, Grandview, Kenneth Village, and the commercial corridors.
In some Glendale neighborhoods, yes. Hillside work in 91207 and 91208 can add cost because of deeper footings, potential soils reports, and wind-load requirements that don’t apply on flat lots in Burbank. Flatland Glendale pricing is on par with neighbors like Silver Lake and Echo Park. Call (877) 610-1318 for an exact quote; the estimate is free.
Yes, on every eligible job. Glendale Building and Safety rules vary by fence height and location, especially in the Very High Fire Hazard Severity Zones, and we handle that paperwork so you don’t have to. The permit inspector works for you, not for us, which is why we like having him on the job.
Yes. Our 90-Day Done Right Promise applies to every fence we install in Glendale regardless of the terrain. If something isn’t done right, Tom Barrett comes back and makes it right. That’s the deal, written on the contract.
When you’re ready to talk about a new fence or a repair in Glendale, call (877) 610-1318. Tom Barrett and his sons will walk your lot, answer your questions straight, and put the whole scope in writing before you commit to anything.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Glendale and surrounding communities since 1998.