Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Duncanville
Fence installation in Duncanville, TX typically runs $3,500-$9,000 for a standard vinyl fence, and a lot of that cost comes down to what’s under your grass: expansive blackland prairie clay that moves more than any soil in Dallas County. Barrett & Sons Construction has been setting posts in this ground since 1998. We’re the ones who dig deeper, add gravel, and engineer footings for soil that shrinks and heaves all year. If you’re planning a new fence around your Duncanville lot, call (877) 610-1318 for a free written estimate. We answer the phone with a live person, not a voicemail box.
Why Barrett & Sons Construction Is Duncanville’s Preferred Fence Installation Company
Tom Barrett put his name on the truck in 1998, and his sons run the crews that show up in Duncanville. That means the person quoting your fence is the person accountable for it. No franchise. No caller ID roulette with an out-of-state call center. When a Duncanville homeowner calls (877) 610-1318, a live person answers. When Tom says a price, it’s the price. When a scope changes, it changes in writing, on a change order, before a single post hole is dug.
We know the difference between a standard frost-depth fence on flat Garland clay and what Duncanville’s 75116, 75137, and 75138 lots actually need. Gravel bases. Deeper augering. Post-tension slab setback checks. Those aren’t upsells. They’re what keeps your fence plumb past the second summer. And we back the work with a 90-Day Done Right Promise written on every contract. If it isn’t right, one call brings Tom back.
Ask anyone on your street, or look up the license number yourself. Tom publishes his name, his address, and his license number so you can verify it before signing. That’s the way it should work.
Our Fence Installation Services in Duncanville
Wood Fence
Wood fences are the most common fence we install across Duncanville’s 1960s-1980s ranch home lots. A typical pressure-treated pine or cedar privacy fence runs $3,500-$9,000 depending on linear footage and gate count. On blackland clay, we auger posts 36 inches deep, add a gravel base, and set them in high-strength concrete. A wood fence done this way will outlast a cheaper fence set at 24 inches by a decade.
Privacy Fence
Privacy fence is what most Duncanville homeowners ask for first, especially on corner lots along West Wheatland Road or near the older subdivisions off Camp Wisdom Road. We install 6-foot and 8-foot privacy fence with pressure-treated posts and either cedar pickets or composite options. On lots with existing slab-on-grade homes, we verify the post-tension slab setback before marking any line near the house. That prevents cutting into a slab that shouldn’t be touched.
Chain Link Fence
Chain link remains the workhorse for Duncanville homeowners fencing larger lots or defining property lines without blocking sight lines. Many original chain-link lines from the 1980s have already heaved out of plumb because their posts were set too shallow for this soil. We replace them properly. Galvanized and vinyl-coated chain link hold up fine here when the footings are right.
Aluminum Fence
Aluminum fence gives Duncanville homes a clean, low-maintenance perimeter, especially around pools and front yards. Aluminum fence installation in Duncanville runs $4,000-$10,000. The metal itself won’t rust, but the footing will fail if it’s poured at standard depth into shrink-swell clay without a gravel base. We design hinge post footings for gate loads before the panels ever get ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duncanville
We install and repair fence systems from Simonton, Ply Gem, and PGT, and we service them across Duncanville. If you already have a branded fence line that’s failing at the footing, we can match the panel profile and replace what’s bad without tearing out the whole run. Our crews stock common parts locally, so a repair quote on a Ply Gem or Simonton fence line doesn’t take a week to research. We know what those systems cost and how they behave on southern Dallas County clay.
Common Fence Installation Problems We See in Duncanville Homes
- Posts heaved out of plumb within two years. This is the single most common failure in Duncanville, and it’s almost always a footing problem. Standard depth posts with no gravel base get pushed around by clay that expands 10% or more after heavy rain. We fix it by re-augering deeper and adding drainage at the post base.
- Gates racking out of square on aluminum and iron fences. When a gate gets added without re-engineering the hinge post footing, the swinging weight racks the frame on clay that never stops moving. We size hinge post footings for the gate before installation, not after.
- Fence lines encroaching on septic drain fields or well setbacks. Duncanville has county overlay rules that older site plans didn’t account for. We check the current county requirements before drawing any fence line on acreage.
- Cracked concrete footings from freeze-thaw cycling on shallow pours. North Texas doesn’t freeze deep, but it freezes enough. Shallow footings on clay catch the worst of it. Our footings go below the movement zone and include gravel to shed water away from the post.
Pricing for Fence Installation in Duncanville, TX
Here’s what we quote in Duncanville in 2025 and 2026, and these numbers hold for most standard lots:
| Project Type | Typical Duncanville Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
Wood privacy fence generally lands in the same $3,500-$9,000 window as vinyl, with cedar running toward the top of the range. What moves the number: linear footage, gate count, whether we’re pulling a permit through the county, and whether grading or drainage work is needed along the line. Every quote we give Duncanville homeowners is a written line-item quote. Every allowance is spelled out before work starts. Call (877) 610-1318 to schedule your free written estimate.
We Also Serve Cities Near Duncanville
Our crews run regularly to Duncanville from the Dallas-Fort Worth metro office, and we serve the surrounding communities including DeSoto, Glenn Heights, Lancaster, and Dallas. If you’re in one of those cities and need Fence Installation work done right, the same crew and the same written pricing rules apply. For readers in Duncanville specifically, see more on our local page: Fence Installation in Duncanville.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Duncanville
It depends on the scope, but in most cases a fence on Duncanville acreage needs county review, not just city review, especially if the line is near a septic drain field or a well. We pull permits and arrange inspections on every eligible job. The inspector works for you, not for me, and that’s the way it should stay. Call (877) 610-1318 for a direct answer on your lot.
We set line posts at a minimum of 36 inches in Duncanville’s expansive clay, with a gravel base beneath and high-strength concrete around the post. Standard 24-inch depth will fail here within a few seasons of drought and rain cycles. For gate posts, we go deeper and larger. Call (877) 610-1318 for a quote on your specific fence line.
Usually yes, but we check the slab and setback first. On older Duncanville lots, detached structures sometimes sit on post-tension slabs or near septic lines, and we verify before we tie a fence into them. Attaching to a structure also changes footing requirements for the adjacent posts. Call (877) 610-1318 to talk through your layout.
Grading to get a stable fence line on an open Duncanville lot typically runs $800-$2,500 as a line item, depending on slope and drainage. We scope it and put it in writing before we quote, so there’s no surprise at the end. An allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 for a line-item estimate.
Because their posts were set at standard depth into shrink-swell clay without a gravel base, and the clay heaved them after the first big wetting cycle. We re-set leaning lines at 36 inches with gravel and concrete, and they stay put. If yours is leaning, call (877) 610-1318 for a repair quote.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Duncanville and the surrounding Dallas County communities.