Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Cutler Bay
A new fence in Cutler Bay typically runs $3,500 to $9,000, depending on the material and how much of the existing line has to come out first. We’re the owner-operated crew that shows up when we say we will, with a written price that doesn’t change at the door. Tom Barrett founded this company in 1998, and his sons run the crews that work Cutler Bay every week. Call (877) 610-1318 and you’ll talk to a live person who can schedule a free estimate.
We know Cutler Bay’s housing stock because we’ve torn out enough failed fences here to understand exactly what the salt air, the water table, and the hurricane codes do to a post that was never right for this town to begin with. A fence that works fine in Homestead or Kendall fails here in three years if it’s built to inland spec. That’s not an opinion. It’s what we see when we pull a rotted post out of the ground in Lakes by the Bay and show the homeowner the corroded steel base that someone else buried in standing water.
Why Barrett & Sons Construction Is Cutler Bay’s Preferred Fence Installation Company
We’ve been pulling permits and passing inspections in Cutler Bay for years, and the permit inspector knows Tom’s name when he signs off on a job. That matters here more than almost anywhere else in South Florida, because Cutler Bay sits inside Miami-Dade County’s High Velocity Hurricane Zone. An inspector who trusts your work is worth something. An inspector who has to re-check everything because the last crew from out of county left non-compliant hardware in the ground is a delay you don’t need.
Our Cutler Bay customers call us because the quote they get is the price they pay. Every scope change, every allowance, every material upgrade goes on paper as a written change order before the crew touches it. The allowance that isn’t on paper is a surprise waiting for a date, and our customers have already been surprised by enough national outfits to last a lifetime. When we replace a fence in Cutler Bay, the 90-Day Done Right Promise is written on the contract. If something’s not right, Tom comes back and makes it right. One call.
Our Fence Installation Services in Cutler Bay
This page targets the four fence types we install most in Cutler Bay, but the list below is not the whole menu. We also handle iron fence, privacy fence, fence gates, and commercial fencing. If you’re not sure which material fits your block, call us and we’ll walk the property with you before you spend a dime.
Aluminum Fence
Aluminum fence installation in Cutler Bay runs $4,000 to $10,000 for a typical residential lot. We specify marine-grade aluminum posts and stainless fasteners on every job here because non-coated aluminum turns chalky and pits within a few seasons of salt air. Aluminum is the right choice for canal-front properties in Lakes by the Bay, where the breeze carries salt off the water and eats through anything less.
Vinyl Fence
Vinyl fence installation in Cutler Bay runs $3,500 to $9,000, and the single most important decision is the hardware. Cheap vinyl panels look fine for eighteen months, then the UV and salt start bleaching the surface and the uncoated screws behind the brackets bleed rust streaks down the white panels. We order vinyl systems factory-paired with stainless steel hardware and verify the Miami-Dade NOA before anything gets installed.
Wood Fence
Wood fence is the traditional look in Cutler Bay neighborhoods, but it’s the material that suffers most from the high water table. We use pressure-treated posts set in concrete with hot-dip galvanized post bases and inspect the footer depth against the water table before we dig. Wood fences on the western edge of Cutler Bay, toward the Everglades transition, need deeper footers and better drainage than anything you’d spec in Cutler Ridge.
Chain Link Fence
Chain link is still common on older Cutler Bay lots, especially around the pre-Andrew masonry homes that survived the storm. The failure points are almost always the post bases and the tension bands. When we repair a chain link line in Cutler Bay, we replace standard hardware with NOA-listed galvanized components that actually meet HVHZ requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cutler Bay
We install materials you can look up, not mystery products off a van. On fence jobs around Cutler Bay we regularly work with industry-standard fence systems and hardware from national manufacturers with published specifications, and we match the post and rail system to the NOA list before we order. The same philosophy applies to our sister trades: Belgard and Techo-Bloc on hardscapes, GAF on roofs, Andersen on windows. You’ll get a spec sheet with your written estimate, along with the product approval numbers. If a material doesn’t carry a Miami-Dade NOA, it doesn’t go on a Cutler Bay job. Period.
Common Fence Installation Problems We See in Cutler Bay Homes
- Non-NOA fasteners and post bases corroding within two to three years. Salt air near the coast and the high water table in planned communities like Lakes by the Bay eat through standard steel hardware fast. Sections start leaning, then detach at the base during the first real wind event.
- Untreated wood posts rotting below grade. Cutler Bay’s water table sits a foot or two below the surface across most of town. A wood post that wicks groundwater from a shallow footer rots from the inside out, and the fence comes down under hurricane wind load.
- Vinyl fences with rust streaks on white panels. The panels are fine. The screws behind the brackets are not. Uncoated hardware under a white vinyl panel shows rust within eighteen months in this salt air.
- Chain link lines failing at the tension bands on pre-Andrew homes. Older Cutler Bay lots still have original chain link from the 1960s and 70s. The fabric often survives, but the bands and post caps are gone, and the fence sags until a gate stops closing.
Pricing for Fence Installation in Cutler Bay, FL
| Service | Typical Range in Cutler Bay |
|---|---|
| Aluminum Fence Installation | $4,000 - $10,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Fence Repair (post replacement, NOA hardware) | $400 - $1,800 |
What moves the number? First, how many feet of existing fence has to come out, and whether the old posts were set in concrete. Second, material choice. Third, whether your property sits in a FEMA flood zone that triggers freeboard-related footer requirements. Fourth, access: canal-front lots and zero-lot-line properties in Lakes by the Bay take longer to stage. We give you a written line-item quote so you can see exactly where the money goes. Call (877) 610-1318 to schedule your free estimate. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Cutler Bay
We work throughout the southern end of Miami-Dade County, including Cutler Ridge, Lakes by the Bay, Goulds, and East Perrine. If you’re just over the line in one of those communities and wondering whether we’ll come out, the answer is yes. Our Fence Installation team serves the whole Cutler Bay area from our South Florida office, and scheduling is coordinated from our Miami metro location. See the Cutler Bay page for specific coverage details in your neighborhood.
Serving Cutler Bay, FL - Our Local Coverage Area
We’re based in the Cutler Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Cutler Bay
Yes. Cutler Bay sits inside Miami-Dade County’s High Velocity Hurricane Zone, and the code requires NOA-listed posts, hardware, and materials for exterior structures including fences. A fence built without NOA-compliant components is a code violation that can be flagged by an inspector and, worse, may fail during a hurricane wind load. We pull permits and verify NOA compliance on every fence job we do in Cutler Bay, because the alternative is a fence that looks fine on the day it’s installed and fails when the wind actually arrives. Call (877) 610-1318 for a written quote that includes the permitted, NOA-compliant spec.
Because the water table in Lakes by the Bay sits extremely high, sometimes within a foot of the surface, and the canal system that runs through the community keeps that groundwater moving through the soil around your posts. An untreated wood post or a non-galvanized steel post base sitting in permanently wet ground rots or corrodes within two to three years, no matter how clean the installation looked. We saw this firsthand on a Lakes by the Bay job where a previous crew used non-NOA steel post bases; we pulled them out corroded and replaced them with hot-dip galvanized bases and marine-grade stainless fasteners, then set the inspection sign-off without a single change order. That’s the spec that matches the actual ground conditions here. Call (877) 610-1318 and we’ll check your post bases before you commit to a repair.
Have the line inspected post by post before you assume the whole fence needs to come out. On many pre-Andrew homes in Cutler Bay, the chain link fabric is still structurally sound, but the post caps and tension bands are rusted through, and a few posts have shifted in the soft ground. We can often replace the failed hardware and reset the posts for $400 to $1,800 instead of a full replacement at $3,500 to $9,000. The key is checking the hardware against current HVHZ requirements, because a fence that survived Andrew may not pass today’s inspection. Call (877) 610-1318 for a free assessment.
Most parcels in Cutler Bay fall inside a FEMA flood zone, which means any new fence or fence replacement must account for the required footer depth and drainage without impeding overland water flow. In practice, that often means deeper concrete footers for aluminum posts and careful grading around the fence line so that stormwater can still move across your yard. A crew that doesn’t pull the flood map before digging a fence line can create a drainage problem that shows up during the first heavy summer rain. We review the flood zone designation on every Cutler Bay fence job and factor it into the written quote up front. Call (877) 610-1318 for an estimate that includes the flood zone review.
Yes, almost always. An inland-spec vinyl fence with standard steel hardware and non-UV-stabilized panels will run you less on day one, but in Cutler Bay’s salt air and intense sun, those panels fade, the hardware rusts through the bracket faces, and the sections start to fail within five to seven years. Replacing that fence means paying for the removal, the new materials, and the labor all over again. The price difference between the coastal-spec vinyl and the inland-spec version is often only $1,000 to $2,000 on a typical Cutler Bay lot, and the coastal spec lasts twice as long. We write the full spec on your estimate so you can compare it against any other bid. Call (877) 610-1318 and ask for the line-item vinyl quote.
Get Your Free Cutler Bay Fence Estimate
We live where you live, we answer our own phone, and we put our name on every fence we build in Cutler Bay. Tom Barrett’s name, address, and license number are published and verifiable. Look us up before you sign anything. Then call (877) 610-1318 and schedule a free estimate for your fence project. We’ll walk the property, check the water table and the flood zone, and hand you a written line-item quote that covers the permit, the NOA-compliant materials, and the labor. No surprises, no change orders unless something changes in scope, and the 90-Day Done Right Promise on every job.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Cutler Bay.







Before
After
Before
After
Before
After