Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Corona
A typical new fence in Corona runs $3,500 to $9,000 depending on the material, the length of the run, and what’s happening with the ground underneath it. That range covers most wood, vinyl, and aluminum jobs we quote across 92882, 92883, 92877, and 92878. If you’re standing in your yard right now staring at a fence that’s leaning toward your neighbor’s property or one that snapped clean off at the posts during the last Santa Ana wind, call (877) 610-1318 and we’ll come look at it. We’ve been building and repairing fences in Corona long enough to know exactly what these winds do to a 6-foot privacy panel, and we show up ready to talk numbers, not excuses.
Why Barrett & Sons Construction Is Corona’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998, and his sons run the crews. When we say Fence Installation, we mean the Barrett name is on the truck that pulls up in front of your house, not a subcontractor we’ve never met. That matters in a city like Corona, where a lot of the housing stock went up fast in the 1990s and 2000s and now needs real attention, not a clipboard quote from an out-of-town outfit.
We publish Tom’s name, his address, and his license number. You can look all of it up before you sign anything, and we’d honestly rather you did. The permit inspector works for you, not for me, and that’s why I like him. Every fence job that requires a permit in Corona gets one pulled, and every inspection gets signed. If the last contractor you used told you permits were optional, you already know how that story ends.
Our pricing comes in writing, with every change order on paper before a single post goes in the ground. The 90-Day Done Right Promise rides on every contract, and one call brings Tom back if something’s not right. That’s the whole deal, and it’s worked for 29 years.
Our Fence Installation Services in Corona
Wood Fence
Wood fences are still the most common thing we build in Corona, especially in the master-planned communities east of the 15 and north of Cajalco Road, where cedar board-on-board and dog-ear privacy styles dominate. The heat here bakes exposed wood faster than most people expect, so we recommend cedar or pressure-treated stock with UV-resistant sealant from day one. In the 92883 corridor near the Temescal Valley foothills, we’re also careful about spacing and post depth because the winds funneling between the Santa Ana Mountains and Chino Hills will find every weak point in a wood fence within a week.

Chain Link Fence
Chain link gets a bad rap, but it’s the right answer for a lot of Corona yards, especially the lots off Magnolia Avenue and the older sections near downtown where people want to keep dogs in and view corridors open. Galvanized steel with concrete-set posts handles the heat and wind without complaint, and it’s the least expensive full-perimeter option we offer. We also do privacy slat inserts on chain link, which is a practical middle ground a lot of Corona homeowners don’t know about.

Vinyl Fence
Vinyl fence installation in Corona usually runs $3,500 to $9,000 and has become a strong option for the tract-home subdivisions in the 92883 ZIP code, where HOA rules often dictate fence style and height. Vinyl holds up better than wood under 105-degree summers and doesn’t need restaining every couple of years. One caution with vinyl in this area: the Santa Ana winds will test the post spacing. We set vinyl posts deeper and use more concrete than the manufacturer minimum, because a vinyl panel that catches wind acts like a sail.

Aluminum Fence
For pool enclosures and decorative front-yard perimeter work in Corona’s newer gated communities, aluminum is what we recommend most often. It’s rust-resistant, handles the inland sun without warping, and meets Riverside County pool barrier requirements when installed to code. Aluminum fence installation in Corona typically runs $4,000 to $10,000 depending on panel height and gate count. We also do aluminum driveway gates, which is a natural upgrade if you’re already fencing the front yard.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corona
We don’t stock mystery materials off the back of a van. The hardscape and fence materials we use are brands you can look up, like Techo-Bloc and Belgard when the job involves fence posts set into paver lines or retaining wall transitions. For concrete footings and post bases, we use Quikrete products and mix on site so we’re not waiting on a truck. If you want a specific material from any of these lines, say so when you call, and we’ll price it into the written scope before we start digging.
Common Fence Installation Problems We See in Corona Homes
Every city has its own way of wearing out a fence. Here’s what shows up most in Corona, over and over:
- Santa Ana wind damage: Corona sits in a natural wind funnel between the Santa Ana Mountains and Chino Hills, and those gusts hit fence panels with a lot more force than people expect. We regularly replace fences in the 92883 and 92877 ZIP codes where post-heavy uplift pulled 4x4s right out of the concrete or snapped rails clean through.
- Expansive clay soil movement: The Temescal Valley floor is loaded with bentonite-bearing clay, and it swells and shrinks with the seasons. That shift moves post footings over time, which is why we see fences in 15-year-old Corona homes leaning hard even when the wood itself is still sound. Post depth and gravel drainage matter more here than almost anywhere else in the Inland Empire.
- HOA fence specs: Most of Corona’s master-planned communities in the 92883 and 92878 corridors have detailed HOA rules on fence height, material, and color. We quote to the HOA spec from the start, because the fastest way to waste a fence budget in Corona is to build something the board will make you tear down.
- Sun-baked wood failure: Inland summers regularly exceed 105°F in Corona, and unprotected wooden fence pickets and rails get brittle fast. We see fences that should have lasted 15 years fail in half that time because of UV degradation alone. Staining and sealing is not optional here, and we’ll include it in your written quote.
Pricing for Fence Installation in Corona, CA
A full wood privacy fence in Corona generally lands between $3,500 and $9,000 for a standard residential yard. Chain link runs lower, aluminum and ornamental iron runs higher. Specifics change with the length of the run, the number of gates, the condition of the ground, and whether the HOA has material requirements. What doesn’t change is how we price it: a written line-item scope before work starts, and any change to that scope comes to you as a written change order before it happens. No surprise invoices, no “the allowance ran out” phone calls. If you want a second opinion on any written estimate you’ve already received, we’ll take a look for free. Call (877) 610-1318 for an exact quote on your fence in Corona.
We Also Serve Cities Near Corona
If you’re just outside the city limits, we’re still your local option. We regularly work in Home Gardens, El Cerrito Corona, Eastvale, and Norco. The same pricing structure applies, and the same crew runs those jobs too. And if your fencing project grows into something bigger, like a paver patio or a driveway refresh, we also handle Driveway & Pavers in Corona and Home Additions & ADU in Corona.
Serving Corona, CA - Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Corona
We can usually have someone at your Corona property within a day or two of your call to (877) 610-1318, and the written estimate follows quickly after. We schedule Corona jobs locally from our Inland Empire office, so we’re not working around a travel window from somewhere else. The No Trip Charge Inside the County offer applies, and the Senior & Veteran discount of 10% comes off the final invoice on every qualifying job.
We cover the full Corona area: 92882, 92883, 92877, and 92878, from the older streets near Grand Boulevard all the way down through the Temescal Valley foothills neighborhoods in the 92883 ZIP. South Corona’s graded hillside lots and wind exposure make fence installation there a different animal than the flatter central core, and we plan post depth and wind bracing accordingly.
Fence repair in Corona ranges widely. A single post reset might be a few hundred dollars, while replacing a full wind-damaged section could run $2,000 to $5,000 depending on the material and length. We’ll give you a written repair scope before any work starts, and the $40 Off Any Repair Over $200 offer applies. If a repair isn’t worth doing relative to a replacement, we’ll tell you that straight, and we’ll show you both numbers on paper.
Many fence jobs in Corona do require a permit, especially anything over 6 feet or any fence that acts as a pool barrier. We pull permits and get inspections signed on every eligible job, period. Riverside County and the city of Corona both enforce fence height and setback rules, and HOAs add another layer. We handle all of it, and we’ll tell you exactly what your project needs before the first hole is dug.
Every fence installation we complete in Corona is covered by our written 90-Day Done Right Promise. If something isn’t done right, Tom comes back and makes it right with one call. Beyond that, materials carry their own manufacturer warranties, and we’ll walk you through which ones apply to your fence before the job starts. Call (877) 610-1318 with any question about a warranty on an existing Barrett & Sons fence, and a live person will answer.
Get Your Corona Fence Estimate
If you want a fence in Corona that’s quoted honestly, built to handle the winds and the clay, and backed by a written promise, call (877) 610-1318. We’ll schedule your free estimate, put every number on paper, and we won’t make you chase us down for answers. Ask anyone on your street about us, or look up the license number yourself. Then call.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Corona and the Inland Empire since 1998.







Before
After
Before
After
Before
After