Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Compton
A new fence in Compton generally runs $3,500-$9,000 for a full property, and the material you choose matters more here than in most places. We’re Barrett & Sons Construction, and we’ve been building fences that stand up to Compton’s specific conditions since 1998. If you’re anywhere in the 90220, 90221, 90222, or 90223 zip codes, call (877) 610-1318 and Tom will talk you through what works on your block.
Compton sits directly above the Compton blind thrust fault, a documented active fault capable of a 6.5 to 7.0 magnitude earthquake. That changes how we pour footings and attach hardware on every fence we build here. It’s not a scare tactic. It’s the difference between a fence that leans after five years and one that stays plumb for thirty.
Why Barrett & Sons Construction Is Compton’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998, and his sons run the crews you’ll see in Compton. That’s not marketing copy. When a Barrett truck pulls up on Rosecrans or Alameda, the name on the door matches the people holding the post-hole digger. We publish Tom’s name, address, and license number so you can verify us before you sign anything.
We’ve rebuilt fence lines along East Rosecrans Avenue, in the blocks off Long Beach Boulevard, and through the neighborhoods around Compton High School. Homeowners here tell us the same story: they hired a company that quoted one number on the phone and handed them a different invoice at the end. We don’t work that way. Every scope, every allowance, every price change arrives as a written change order before work starts. If the allowance isn’t on paper, it’s a surprise waiting for a date.
Ask anyone on your street. Or look up the license number yourself. We live and work in the Los Angeles basin, and crews serving Compton are coordinated from our local office. A live person answers the phone 24/7, not a voicemail box or an out-of-state call center.
Our Fence Installation Services in Compton
Wood Fence
Wood fences remain the most common choice in Compton’s 1940s-1960s tract neighborhoods, and for good reason. A properly built cedar privacy fence at 6 feet gives you a solid sound and sight barrier on tight lots. The trick in Compton is the embedment depth and hardware spec. Our Fence Installation crews set pressure-treated posts at minimum 30 inches with hot-dip galvanized brackets, not the 18-inch shallow footings we routinely pull out of old fences here. Kiln-dried cedar and stainless ring-shank nails complete the assembly.
Chain Link Fence
Chain link is the workhorse for Compton backyards and commercial perimeters off Alameda and Santa Fe. But the expansive clay soil here heaves, and shallow-set chain link footings kink at the bottom rail within a few seasons. We deepen every footing below the active clay layer and use heavier-gauge posts than you’ll get from a big-box install. That’s why our chain link fences hold a straight line when the neighbor’s fence starts waving.
Vinyl Fence
Vinyl looks clean and needs no painting, but Compton’s urban heat island punishes cheap formulations. South-facing exposures here run 10 to 15 degrees hotter than beach cities, and low-grade vinyl rails soften enough to sag and pop out of brackets under normal gate use. We specify vinyl rated for high-UV inland heat and reinforce the rail brackets. You’ll pay a little more than the bargain quote, and you’ll replace the fence once instead of twice.
Aluminum Fence
Aluminum gives you the clean look of iron without the rust problem, which is useful this close to marine air. For Compton’s main streets, we recommend hot-dip galvanized posts under powder-coated aluminum panels. The galvanized core resists corrosion where the post enters the concrete collar, which is where powder-coated-only posts fail first. It’s a small spec difference with a ten-year consequence.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Compton
We carry aluminum and vinyl lines from Ply Gem and PGT, products you can research before you spend a dollar. For fence hardware, we stock hot-dip galvanized brackets and stainless fasteners in our Los Angeles yard, sized for Compton’s embedment and seismic requirements. When a gate hinge fails or a post needs replacement, we’re not waiting on a supplier three states away. We pull what we need and get it to your property.
Common Fence Installation Problems We See in Compton Homes
- Shallow concrete collars cracking posts at the base: Compton’s heat bakes the stucco-side collar, causing differential expansion that works the post loose even without wind load. Most original 1950s and 1960s fences here were set at 18 inches, which fails within five years.
- Chain link bottom rails heaving and kinking: The expansive clay under Compton swells and shrinks with moisture. Footings that don’t extend below the active clay layer rise, and the bottom rail takes the damage.
- Vinyl rails sagging on south-facing runs: Summer highs over 90°F soften cheap vinyl enough that rails slip out of brackets. We see it most on gates, where repeated operation works the rail loose.
- Rotted posts at the soil line: Older Compton fences used non-pressure-treated posts in unreinforced concrete. The wood rots right where it meets the collar, and the whole panel run leans. This is the failure we found on the 1952 slab-on-grade home off East Rosecrans before we rebuilt it with 30-inch pressure-treated posts and galvanized steel connectors.
Pricing for Fence Installation in Compton, CA
Here’s what you can expect to pay in Compton right now. Vinyl fence installation runs $3,500-$9,000. Aluminum fence installation runs $4,000-$10,000. Wood and chain link fall within a similar band depending on linear footage and whether we’re tearing out an old line first.
| Fence Type | Typical Compton Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Wood Fence (cedar, 6 ft) | $3,500-$9,000 |
| Chain Link (galvanized, 4-6 ft) | Comparable by linear foot; call for a measured quote |
What moves the price: linear footage, gate count, tear-out of old concrete footings, and whether we hit expansive clay that requires deeper excavation. Every quote is a written, line-item scope. No allowances off-paper. No change orders without your signature first. Call (877) 610-1318 for a free estimate at your Compton property, and we’ll send Tom or one of his sons to walk the line with you.
We Also Serve Cities Near Compton
Barrett & Sons Construction builds fences throughout the South Bay and Gateway Cities. We serve Fence Installation in Compton plus East Rancho Dominguez, West Rancho Dominguez, Carson, and Gardena. If you’re on a border block, the crew that knows your soil and your post depth comes from the same team either way.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Compton
Yes, Compton requires a permit for fence replacement even when you’re rebuilding on the same line, and the inspection verifies post depth and setback. We pull permits on every eligible job and the inspector signs off before we call it done. The permit inspector works for you, not for me, which is why we like him. Call (877) 610-1318 and we’ll check your specific address against current city requirements before you spend anything.
The expansive clay under Compton swells and shrinks with rainfall and drought, and it lifts shallow footings unevenly. The posts may still be vertical, but the bottom rail, which is tensioned between them, kinks as the footings rise at different rates. Deepening the footing below the active clay zone solves it. We do that on every chain link job in Compton, not just the ones on cracked-slab blocks.
Use hot-dip galvanized posts under powder-coated aluminum panels. The post base sits in concrete, where moisture and salt air concentrate, and that’s exactly where powder-coat-only posts corrode first. The galvanized core gives you the corrosion resistance, and the powder coat on top gives you the color. It costs more up front and saves a full replacement within a decade.
We set fence posts at a minimum 30 inches in Compton, which is deeper than the 24 inches typical inland and well beyond the 18 inches we routinely find in original 1950s work. This gets the footing below the active clay layer and gives the post enough bearing to survive the ground rupture potential of the Compton blind thrust. The old shallow footings fail in ordinary clay movement; they have no reserve for a 6.5 magnitude event.
Yes, less than on the beach but more than people expect. Compton sits close enough to the marine layer that airborne chlorides reach fence hardware, and stainless or hot-dip galvanized fasteners make a real difference. We use stainless ring-shank nails on wood fences and galvanized brackets on every assembly. Cheap electroplated nails off a discount shelf rust within a few seasons, and the panel joints open up.
Call (877) 610-1318 to schedule your free estimate in Compton. We’ll walk the line, write the scope, and tell you exactly what material and depth your block needs. No surprises, no off-paper allowances, and a 90-Day Done Right Promise on every job.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Compton since 1998.