Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Brushy Creek
Fence installation in Brushy Creek, TX typically runs $3,500 to $9,000 for a standard wood or vinyl privacy fence on a quarter-acre lot, with most jobs completed in two to four working days after permits clear Williamson County. We’re Barrett & Sons Construction, and we’ve been building fences in this part of Williamson County long enough to know two things: the permit goes through the county, not a city office, and the HOA in your subdivision will absolutely have an opinion about your fence. Call (877) 610-1318 for a free estimate, and we’ll walk you through both steps before the first post hole is dug.
Why Barrett & Sons Construction Is Brushy Creek’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998, and his sons run the crews. When you call, a live person answers, not a call center in another state. That matters to Brushy Creek homeowners, because the questions you’ll have – about county permits, HOA architectural standards, and fence failures specific to the 78717 ZIP – need answers from someone who actually works here, not a script.
We know Brushy Creek’s housing stock because we’ve been inside it for over two decades. The master-planned community built between the mid-1990s and 2008 sits on expansive Blackland Prairie clay. That’s not a geology footnote. It’s the reason so many original cedar fences in this area are leaning, popping rails, or lifting out of plumb right now. We’ll explain what that means for your fence in a minute, but first, know this: our Fence Installation team has pulled more Williamson County fence permits for Brushy Creek jobs than we can count, and every single price change arrives as a written change order before work proceeds. No surprises at the end.
We publish our name, address, and license number. Look us up. Ask anyone on your street. We want you to verify us before you sign anything.
Our Fence Installation Services in Brushy Creek
Wood Fence
Wood privacy fences are the most common fence type across Brushy Creek, and for good reason. Cedar and pressure-treated pine match the look of the area’s brick-veneer two-story homes, and they’re straightforward to repair section by section when something fails. In the Brushy Creek master-planned community, most original fences were built with western red cedar pickets on treated pine rails and posts. The weak point, almost every time, is the post depth and setting method. Original 1990s posts were often set 18 to 24 inches deep in clay that moves seasonally. We set posts 30 to 36 inches deep with concrete designed for expansive soil, which keeps the fence plumb through the drought-to-deluge cycle central Texas throws at it every year.
Privacy Fence
A privacy fence in Brushy Creek is typically a 6-foot board-on-board or shadowbox design. HOA standards in most subdivisions here dictate height, material, and even the finished side orientation. We pull the architectural guidelines for your specific section before we quote, so you’re not surprised by a notice from the architectural review committee six weeks after installation. That’s a conversation we’ve had too many times with homeowners who went with an out-of-area crew that never read the neighborhood rules.
Chain Link Fence
Chain link still has a place in Brushy Creek, particularly for backyards that back up to open space, creek beds, or utility easements. It’s the most economical option upfront, and it handles the clay soil movement better than rigid panel systems because it flexes rather than fights the ground. That said, chain link posts set shallow will still lean, and we see plenty of 1990s-era chain link fences around the community with posts that have shifted an inch or two over the years. The fix is the same: deeper post embedment and better concrete.
Aluminum Fence
Aluminum fence in Brushy Creek runs $4,000 to $10,000 on average and is gaining popularity for homeowners tired of restaining wood every few years. Aluminum won’t rust in central Texas humidity, and it’s lighter than iron while offering a similar look. The main consideration here is wind load and soil movement. Aluminum panels are rigid, so if a post heaves in the clay, you’ll see it in the panel gap. We account for soil conditions by sizing concrete footings appropriately and using through-bolt mounting where needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brushy Creek
We carry and install fence materials from brands like Ply Gem and Simonton, plus premium wood stock sourced from Texas suppliers. If you’ve got an existing fence with brand-specific components, we can match the original panel profile and color, which matters in HOA-regulated subdivisions where consistency is enforced. We keep common replacement parts in our central Texas warehouse, so repairs in the 78717 ZIP don’t sit waiting on a freight order from out of state.
Common Fence Installation Problems We See in Brushy Creek Homes
- Post heave from Blackland Prairie clay. The soil under Brushy Creek’s subdivisions shrinks dramatically in drought and swells in wet years. Shallow posts get pushed up and out of alignment, which loosens rails and pops pickets loose. We dig deeper and use the right concrete mix for expansive soil.
- Williamson County permit mistakes. A contractor who’s used to Austin or Round Rock city paperwork will file the wrong forms. The job stalls before the first post hole is dug. We pull permits directly with Williamson County every time, and we schedule inspections in advance of the county’s rural-to-suburban inspector routes.
- HOA material and height violations. Brushy Creek’s master-planned subdivisions have architectural standards that specify fence height, material, color, and even which side faces out. An off-spec vinyl or chain-link install can get you a tear-out notice. We check the HOA guidelines before we quote, not after we build.
- Rotted posts and rails at the fence line. The original 1990s fences around Brushy Creek are hitting the 25- to 30-year mark all at once. Cedar posts rot at the soil line, especially where sprinkler heads wet the fence line. We assess the full run, not just the visible failure, so you’re not patching a different section every six months.
Pricing for Fence Installation in Brushy Creek, TX
| Fence Type | Typical Brushy Creek Range |
|---|---|
| Wood Fence Installation | $3,500 - $9,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Fence Repair | $400 - $1,800 |
These ranges are based on work we’ve actually priced in the 78717 ZIP. A standard 150- to 200-linear-foot privacy fence on a Brushy Creek lot lands mid-range for wood and vinyl. What moves the number: linear footage, post depth requirements on sloped lots, removal and haul-away of the old fence, retaining wall or grade issues, and whether Williamson County requires a site survey. HOA-mandated materials or custom color matching on vinyl add cost too. We give you a written line-item quote before work starts, and any change arrives as a written change order. No verbal surprises. Call (877) 610-1318 for your free estimate.
We Also Serve Cities Near Brushy Creek
While this page is for Brushy Creek homeowners, our fence crews regularly work in Fence Installation in Brushy Creek neighbors like Anderson Mill, Jollyville, Cedar Park, and Wells Branch. If you’re just across the line in Cedar Park or Round Rock city limits, the permit process is different from Williamson County’s. We handle both, and we’ll tell you which one applies before you spend a dime.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Brushy Creek
Yes. Because Brushy Creek is an unincorporated Williamson County community, there is no city building department. Fence permits are pulled directly with Williamson County, not the City of Austin or Round Rock. The permit process is straightforward, but the county’s inspectors cover large rural-to-suburban territories, so inspection windows need to be scheduled with lead time. We handle the permit pull and inspection scheduling as part of the job. Call (877) 610-1318 and we’ll confirm the current requirements for your specific address.
Most subdivisions in Brushy Creek’s master-planned community have architectural standards that govern fence height, material, color, and which side of the fence faces out. A replacement that matches your existing fence’s look is usually the safest path. Off-spec materials or heights can trigger a notice to modify or remove the fence. Before we quote, we pull your HOA’s current architectural guidelines so the fence we build passes the committee’s review the first time.
Two reasons: age and soil. The 78717 ZIP encompasses a large wave of tract homes built between roughly 1993 and 2008, so the original cedar fences are now 15 to 30 years old and hitting the end of their material lifespan. Meanwhile, the underlying Blackland Prairie clay expands and contracts dramatically with seasonal moisture, which slowly works shallow posts out of alignment. The combination means whole neighborhoods are seeing leaning fences, popped rails, and rotted posts at about the same time. We repair what’s worth saving and replace what isn’t, with posts set properly for the soil.
Yes, in most cases. Converting from wood to vinyl or aluminum in Brushy Creek runs $3,500 to $10,000 depending on linear footage and the product line you choose. The main hurdle is HOA approval: some subdivisions require fence material consistency across the neighborhood, and others allow conversions with architectural committee sign-off. We’ll check your HOA’s current guidelines before you commit. Vinyl and aluminum both handle the central Texas climate better than untreated wood, and neither will rot.
Williamson County inspectors handle fence work across a much larger geographic area than a city inspector would, so inspection scheduling windows tend to be wider. That means a fence job in Brushy Creek can sit for a few days between work completion and inspection sign-off, while the same job inside Cedar Park or Round Rock city limits would typically get an inspection scheduled faster. We plan the inspection window into the project timeline from day one so you’re not waiting on a surprise delay at the end.
Your Fence, Your Property, Our Name On It
We’re not the cheapest bid in Brushy Creek, and we’re not trying to be. We’re the contractor who pulls the county permit, checks the HOA rules, sets posts deep enough for the clay, and writes every change down on paper before it touches the job. Tom Barrett owns this company. His sons run the crews. If the fence isn’t done right, one call brings Tom back. That’s the 90-Day Done Right Promise, written on every contract. Call (877) 610-1318 today to schedule your free fence estimate in Brushy Creek.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Brushy Creek and Williamson County.