Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Beverly Hills
Fence installation in Beverly Hills typically runs $3,500 to $9,000 for a standard residential vinyl fence, with wood and aluminum landing in a similar range depending on footage and grade. We schedule estimates across every zip code in the city, from the flats of 90212 to the hillside estates of 90210, and Tom Barrett himself reviews your quote before it reaches you. If you’re calling from Beverly Hills, we know your street, we know your setback rules, and we know which plan checker you’ll be dealing with. Call (877) 610-1318 and we’ll put it all on paper.
Why Barrett & Sons Construction Is Beverly Hills’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998 and never turned it into a franchise. His sons run the fence crews, and when a fence goes in on Alpine Drive or Rexford, one of them is on site with the post hole digger, not a stranger dispatched from an out-of-state call center. Beverly Hills homeowners keep our number because we answer the phone with a live person 24 hours a day, and because we publish our license number, our address, and Tom’s name so you can verify us before you sign anything. The Fence Installation team pulls permits on every eligible job and gets inspections signed before we call it done.
The city of Beverly Hills runs its own Building & Safety Division, not LADBS. That means your fence permit goes through a different plan check queue, a different fee schedule, and a different set of inspectors than a fence in West Hollywood or Culver City. We file through Beverly Hills’ system every week, so we know what the corrections look like before they come back. That local fluency saves you days and avoids the frustrating back-and-forth that happens when a contractor files through LA City by mistake.
Our Fence Installation Services in Beverly Hills
Wood Fence
Wood fences are everywhere in the flats south of Santa Monica Boulevard, where 1920s Spanish Colonial and Tudor homes call for something that looks like it’s been there since the beginning. We build with redwood and cedar, and we set posts below the frost line with concrete footings sized for the soil conditions in your specific part of Beverly Hills. If you want horizontal slats, board-on-board privacy, or a scalloped picket to match the original character of a 90212 home, we’ll draw it up and price it before the first board is cut.
Chain Link Fence
Chain link in Beverly Hills usually means one of two things: enclosing a side yard on a smaller flat-area lot, or securing a commercial service area behind a retail storefront. We build chain link with galvanized or vinyl-coated finishes, and we’ll match the gauge and height to the use, whether you’re keeping a dog in on Maple Drive or screening a trash enclosure off Wilshire. It’s the most affordable option in the city and still gets the same permits and the same 90-Day Done Right Promise as everything else we do.
Vinyl Fence
Vinyl has become the go-to privacy fence for Beverly Hills homeowners who want a clean, uniform look without repainting every few years. A standard vinyl privacy fence in Beverly Hills runs $3,500 to $9,000 depending on linear feet and style. The material shrugs off the salt-tinged marine air that drifts over from the coast, and it won’t warp or rot the way wood does in our dry summers followed by occasional heavy winter rains. We install Ply Gem and other name-brand vinyl systems, not mystery product off a truck.
Aluminum Fence
Aluminum fences are common on hillside properties in 90210, where homeowners want a boundary marker that doesn’t block the view. It’s a clean, powder-coated material that handles the steep grades and tight curves of cut-and-fill lots without the hard angles that make iron difficult to fit. Aluminum fence installation in Beverly Hills runs $4,000 to $10,000 for a typical residential run. We’ll spec the right panel height, gate hardware, and post depth for your terrain, and the finish comes with a manufacturer warranty you can look up yourself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We stock and install fencing products from Simonton and Ply Gem along with a handful of other premium manufacturers we’ve tested over 29 years. When a Beverly Hills customer needs a panel replaced or a gate re-hung, we’re not waiting on a truck from out of state. We keep common parts accessible for our crews serving Beverly Hills, so a repair order on a 90213 property gets scheduled faster than a national outfit’s procurement cycle will even allow. You can look up every brand we install before you commit.
Common Fence Installation Problems We See in Beverly Hills Homes
- Hillside grade and drainage. Fences on 90210 hillside lots often sit on engineered fill or cut-and-fill pads, so post depth and footing size need to account for soil that drains fast but shifts over time. We see a lot of fences leaning three years after installation because someone set posts in loose fill with a 24-inch hole.
- Setback and height violations. Beverly Hills enforces its own zoning rules, and fences in front yards and side yards have specific height and placement limits that differ from neighboring Los Angeles. We see plenty of fences flagged on resale inspections because the original builder never pulled a permit.
- Old lath-and-plaster and stucco walls. Many 1920s to 1950s flat-area homes have original plaster walls and aging stucco, which matters when a fence ties into the house or when a fence gate post needs to be set close to a foundation. We check what’s behind the wall before we anchor anything.
- Wildland-Urban Interface requirements. Homes in the hills of 90210 fall under CAL FIRE Chapter 7A in some areas, which can affect adjacent fence materials and placement near ignition-resistant structures. We know when it applies and when it doesn’t, and we’ll tell you the truth either way.
Pricing for Fence Installation in Beverly Hills, CA
A typical wood or vinyl fence in Beverly Hills lands between $3,500 and $9,000. Lineal footage drives most of the cost. A 50-foot run will sit at the lower end; a 150-foot run with two gates and a steep hillside will push toward the top of that range and sometimes beyond it. The style you choose matters too. Here’s how common options break down:
- Wood fence: $3,500-$9,000 depending on species, height, and footage
- Vinyl fence: $3,500-$9,000 for standard privacy panels
- Aluminum fence: $4,000-$10,000 for residential powder-coated systems
- Chain link fence: usually under $4,000 for most Beverly Hills yards
- Fence gates: $500-$2,500 added depending on width, hardware, and automation
Before we start, you get a written line-item quote. If anything changes once we’re in the ground, you get a written change order with the new number before we spread another dollar of your money. No surprises at the end. Call (877) 610-1318 and we’ll put a real number in front of you, free.
We Also Serve Cities Near Beverly Hills
Our crews work Beverly Hills daily and also cover the surrounding communities. If you’re in Century City, West Hollywood, Culver City, or Hollywood, we’ll come out the same way we do in Beverly Hills, with a written estimate and a live person on the phone. We also handle Driveway & Pavers in Beverly Hills and Home Additions & ADU in Beverly Hills if your project goes beyond the fence line. For the full picture, see our Fence Installation in Beverly Hills page.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Beverly Hills
We schedule fence estimates in Beverly Hills within a few business days, and in many cases we can be out the same week you call. If you’re inside the county, there’s no trip charge to come look at your property and put a written quote in your hand. Call (877) 610-1318 and we’ll lock a time on the calendar while you’re still on the phone.
Yes. We work the flats in 90212 and 90213, the business district in 90209, and the hillside estates of 90210. Whether your home is near Roxbury Park, off Benedict Canyon, or just south of Wilshire, our crews serve all four Beverly Hills zip codes.
In most cases, yes. Beverly Hills runs its own Building & Safety Division, and fence permits go through that system, not LADBS. We pull permits on every eligible fence job and get the inspection signed before we finish. The permit inspector works for you, not for me, and we’d rather have them sign off than leave you with a violation on a future sale.
Slightly, and it’s mostly permit and compliance costs. Beverly Hills has its own plan check and inspection fees, its own local amendments to the California Building Code, and a client base that expects a higher level of finish. Figure a fence in Beverly Hills runs $3,500 to $9,000, while the same fence in Culver City might come in on the lower end of that range. What you’ll never get from us is a number that changes once the work starts, because every change order is in writing before it’s acted on.
Every fence we install comes with our 90-Day Done Right Promise, written on your contract. If something isn’t done right, one call brings Tom Barrett back to fix it. The materials also carry manufacturer warranties from brands like Ply Gem and Simonton, and we’ll hand you the paperwork so you know exactly what’s covered and for how long.
Get a Free Fence Installation Estimate in Beverly Hills
If you’ve been burned by a contractor who quoted one price on the phone and handed you another one at the door, you’re the reason Tom Barrett runs Barrett & Sons the way he does. We write everything down, we pull the permits, we publish our license number, and we stand behind the work with a written promise. Call (877) 610-1318 and tell us what you’re thinking about. We’ll come out to your Beverly Hills property, measure it, and give you a free estimate with real numbers, no obligation, and no pressure. Ask for Tom. He’ll answer the phone himself.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Beverly Hills since 1998.