Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Ventura
If you’re searching for a paving crew that actually understands Ventura’s dirt, you’re in the right place. A new driveway here is rarely a simple pour. Between the marine layer eating at steel, the hillside fire zones with their ember rules, and the old coastal lots with brick aprons that predate modern cars, a Ventura driveway job goes sideways fast in the wrong hands. We’ve been handling that for 29 years with Tom Barrett’s name on the truck, not a franchise sticker. Call (877) 610-1318 and talk to a real person who can walk you through what your property actually needs.
Why Barrett & Sons Construction Is Ventura’s Preferred Driveway & Pavers Company
We’re not the biggest outfit in Ventura, and that’s the point. Tom Barrett started this company in 1998, and his sons run the crews you’ll see on your street. When a homeowner on Ventura Avenue or in midtown calls, they’re not getting a call center in another state. They get someone who knows that a hillside lot above downtown carries different base requirements than a flat lot off Telephone Road. We don’t guess at that. We’ve done it.
What keeps our Ventura customers calling back is the paperwork almost as much as the pavers. Every scope, every allowance, every change arrives as a written change order before anything happens. If a hillside drainage correction adds $1,400, you’ll see it on paper and approve it before we dig. No envelope at the end. Tom publishes his name, address, and license number, and he invites you to check it yourself. That’s how a local company should operate.
Our Driveway & Pavers Services in Ventura
Paver Driveways
Interlocking concrete pavers are the best answer for a lot of Ventura properties, especially the hillside lots where the fire-hardening rules get specific. A Driveway & Pavers job in the VHFHSZ often needs a permeable paver apron where the driveway meets the garage. We handle that sequencing so your Chapter 7A inspection doesn’t stall the whole project. Pavers also let us repair a section without tearing out the whole run, which matters on older lots where the root systems from mature trees have pushed slabs around.

Concrete Driveways & Concrete Work
Concrete in Ventura fails a little differently than it does inland. The persistent marine layer keeps moisture in the air, and that moisture finds its way into rebar if the contractor cuts corners on epoxy coating or stainless. We don’t. A spalled driveway at year six is a materials choice we make at day one, and we’d rather spec it right than win the bid with cheap steel. For stamped concrete or a straightforward broom finish, we’ll give you a line-item quote before the first form goes up.

Asphalt Driveways & Resurfacing
Asphalt works well on flat Ventura lots, but it’s not a forever material. The heat from Santa Ana season softens the binder and the cool marine air tightens it back up. That cycle leads to alligator cracking over time if the subgrade wasn’t prepped properly. For resurfacing, we assess the existing base first. On fire-damaged hillside lots, that base is often compromised from heat exposure, not just wear. We’ll tell you honestly whether a refresh will hold or whether you’re better off with pavers.

Driveway Repair & Replacement
We do a lot of repair work on Ventura’s older housing stock. A 1920s Craftsman in the 93001 ZIP often has an unreinforced brick or stone apron that’s cracked under modern vehicle loads. We can underpin it or remove it, but we’ll show you the difference in writing before you choose. Replacement on a midtown 93003 tract home from the 1950s or 60s usually comes down to base depth and drainage. We won’t quote a replacement until we know what’s underneath.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ventura
We install materials you can look up, not mystery brands off the back of a van. For paver driveways and hardscape work, we regularly pull Belgard and Techo-Bloc product lines, and for window or door work tied into a garage or driveway-adjacent wall, we carry Andersen and Marvin options. When a Ventura customer needs a specific paver to match an existing patio, we order it and keep the delivery on our schedule so your project doesn’t stall waiting on material.
Common Driveway & Pavers Problems We See in Ventura Homes
- Rusting rebar in coastal concrete: The marine layer off the Pacific accelerates corrosion on exposed steel, and untreated rebar starts spalling concrete within five to seven years on lots close to the water. We spec epoxy-coated or stainless from the start.
- Hillside driveways failing the ember-resistant zone check: Post-Thomas Fire rebuilds above downtown often overlook the 5-foot ember-resistant requirement at the garage apron. Get that wrong, and the Chapter 7A inspection fails before framing can close. We know the sequencing.
- Old brick and stone aprons cracking under modern loads: Pre-1940s homes in 93001 and older midtown blocks have beautiful original driveways that were never built for a three-quarter-ton pickup. They crack, settle, and need either underpinning or full removal.
- Clay-soil base failure after a wet winter: Ventura’s clay swells when it’s wet and contracts when it dries. A thin gravel base flexes under that cycle and pavers shift. We excavate deeper on clay lots and add a proper Class II aggregate base.
Pricing for Driveway & Pavers in Ventura, CA
Here’s what we actually bid in Ventura, and these numbers are honest for this market. A full paver driveway installation runs $7,000 to $18,000 depending on square footage, access, and whether you’re in a fire zone with its extra material requirements. A new concrete driveway lands between $4,500 and $12,000. Asphalt paving is $3,500 to $9,000, and driveway sealing alone is $250 to $700. The table below breaks it out. What moves the price is site access, base depth, drainage work, and fire-zone compliance. Call (877) 610-1318 for a written line-item estimate, not a number over the phone that changes later.
| Service | Ventura Price Range |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Asphalt Driveway Paving | $3,500 - $9,000 |
| Driveway Sealing | $250 - $700 |
We Also Serve Cities Near Ventura
Our crews run driveways and pavers throughout the Ventura area, including Ventura as well as El Rio, Port Hueneme, Mira Monte, and Ojai. Most jobs are scheduled within a couple of weeks, and we coordinate all permits with the local building department for whichever city has jurisdiction over your lot.
Serving Ventura, CA - Our Local Coverage Area
We’re based in the Ventura area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Ventura
Yes, if your property sits in a Very High Fire Hazard Severity Zone above downtown Ventura, the building code requires a 5-foot ember-resistant zone where the driveway meets the garage and other structures. That typically means a permeable paver apron or a compacted decomposed granite strip instead of standard gravel, because gravel doesn’t qualify. We work this into the scope on the front end and call for the Chapter 7A inspection before we get too far along. Call (877) 610-1318 and we’ll tell you whether your specific lot carries the requirement.
Sometimes, and we’ll be straight with you either way. If the cracks are surface-level and the base underneath is still solid, we can saw-cut and patch the damaged sections. If the slab has dropped or the base has washed out from years of poor drainage, patching is a band-aid that’ll open back up. We’ll core or probe the base before recommending anything. The estimate is free, and you’ll get the repair versus replace numbers side by side in writing.
That depends on where in the 93001 ZIP your property falls and whether the change touches the public right-of-way or coastal setback. Properties closer to the shore can fall under California Coastal Commission jurisdiction, which adds a review layer that inland lots don’t have. On a hillside lot off Ventura Avenue in the 93003 ZIP, our crew replaced a fire-damaged asphalt driveway with interlocking concrete pavers. The old subgrade had slumped under heat exposure, so we excavated to firm soil, added a Class II aggregate base, and installed a 2-inch sand setting bed. Because the property was in the VHFHSZ, our scope of work included a gravel-free ember-resistant border and a compacted decomposed granite strip beside the garage. We pulled the driveway permit through Ventura’s building department and called for inspection sign-off before the first paver was placed. That’s the standard we follow on every coastal or hillside job.
For typical residential paver driveways on Ventura’s clay, we excavate to a minimum of 8 to 12 inches below finished grade, lay a geotextile fabric, then place a compacted Class II aggregate base typically 6 to 8 inches deep depending on slope and drainage, followed by the 1 to 2-inch sand setting bed. Clay holds water and swells, so skipping the fabric or thinning the base is the single most common cause of shifting pavers within a couple of years. We’d rather over-dig by two inches than warranty a driveway that’s already moving.
The punch list gets written down and signed off before we call the job done. If drainage corrections were part of the scope, we test them with actual water flow, not a visual once-over. If a low spot holds water, we fix it and photograph the fix. Anything we touched that’s not right comes back under the 90-Day Done Right Promise, which is written on every contract, not buried in fine print. Call (877) 610-1318 if you have a driveway drainage concern and we’ll look at it for free inside the county.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Ventura since 1998.







Before
After
Before
After
Before
After