Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Millbrae
Driveway and paver work in Millbrae means planning around two things most Bay Area contractors never think about: marine-layer moisture settling over those post-WWII slabs, and FAA airspace rules that can affect even a modest backyard project depending on where you sit relative to SFO’s flight paths. A paver driveway in Millbrae typically runs $7,000 to $18,000, and a concrete driveway runs $4,500 to $12,000. Those ranges cover the work itself; what changes the quote is what’s underneath the old surface and how much of the west hillside drainage wants to run through your property. Call Barrett & Sons at (877) 610-1318 for a free estimate, and we’ll walk the site with you before any numbers go on paper.
Why Barrett & Sons Construction Is Millbrae’s Preferred Driveway & Pavers Company
Tom Barrett started this company in 1998, and he still answers his own phone. The crews running jobs in Millbrae are his sons and their teams, not a rotating cast of subcontractors. That matters when the project is your driveway, the thing your neighbors watch get torn up and rebuilt for a week straight.
We’ve worked on homes along El Camino Real, up the slope along Millbrae Avenue heading west, and in the flat blocks near the BART station. Each spot presents its own set of conditions. Hillside properties on the west side of 94030 frequently need additional base work because the ground moves with the seasons; the east-side flats have their own drainage considerations when winter storms push water from the coastal hills straight toward the bay side of town. Knowing where your house sits helps us price the work honestly the first time.
Our Millbrae customers have left us a strong local reputation over the years, and the reviews consistently mention the same thing: the crew showed up on time, the final bill matched the written estimate, and we answered the phone when they called with a question three weeks later. Tom publishes his name, address, and license number, so you can verify all of it before you sign anything. We also offer a 90-Day Done Right Promise on every job, written into the contract, not buried in fine print.
Our Driveway & Pavers Services in Millbrae
Paver Driveways
A paver driveway is the right call for many Millbrae homes, particularly on the west side where ground movement makes a monolithic concrete slab prone to cracking. We install Belgard and Techo-Bloc pavers with a proper compacted base. That base layer matters more than the pavers themselves in this town: the expansive clay soil prevalent in the hillside parcels absorbs winter rain, swells, shrinks through the dry season, and will undermine any shortcut installation. A paver driveway in Millbrae typically runs between $7,000 and $18,000 depending on square footage, base depth, and whether we’re also rebuilding any of the surrounding walkways.

Concrete Driveways & Concrete Work
For flat lots east of the hills, a concrete driveway remains the most cost-effective long-term option. We pour with proper rebar reinforcement and saw-cut control joints to direct cracking where it’s predictable, not random. On Millbrae’s older slabs, we often see failures from two sources: original concrete poured with no reinforcement in the late ’50s, and water that has been running from an improperly graded yard directly under the slab edge for decades. A new concrete driveway in Millbrae ranges from $4,500 to $12,000. Stamped concrete, which replicates stone or brick at a lower price point, typically adds $2 to $4 per square foot to the base pour.

Asphalt Driveways & Resurfacing
Some Millbrae homes, especially the post-WWII ranchers built in the late 1940s and ’50s, have original asphalt driveways that have been resurfaced repeatedly over the decades. There’s a limit to how many layers an asphalt driveway can take before the base fails. Asphalt resurfacing in Millbrae usually runs $3,500 to $9,000 for a full removal and repave, and $250 to $700 for sealing a driveway that’s still structurally sound. We’ll tell you honestly whether yours needs a seal coat or a full replacement, and you’ll see the distinction in writing.

Driveway Repair & Replacement
You don’t always need a full tear-out. Sunken sections, cracked edges, or a tree-root hump can sometimes be repaired cleanly. But on Millbrae properties where the original slab predates current seismic and energy codes, replacement is often less expensive than paying for repeated patches over the next decade. A full driveway replacement in Millbrae runs $5,000 to $14,000. The crossover work is where we also get a lot of calls from homeowners adding an ADU or expanding a garage, and if that’s on your list, our Home Additions & ADU in Millbrae team coordinates the site work so the new driveway and the new structure happen in the right order.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Millbrae
We carry and install premium hardscape brands you can look up and verify, not whatever happens to be on the truck. For Millbrae paver jobs, we work extensively with Belgard and Techo-Bloc, two of the most respected paver manufacturers in North America. When window or door work ties into a driveway project, we also install Simonton and Ply Gem windows where curb appeal and durability are the priority. Because we keep our supplier relationships close and our scheduling is based out of our Bay Area office serving Millbrae directly, turnaround on material orders and replacements stays fast for our 94030 customers.
Common Driveway & Pavers Problems We See in Millbrae Homes
- Hillside base washout on the west side: The winter rain that comes off the coastal hills moves fast. When an original paver or concrete driveway was installed without proper base drainage, that water carves away the underlying material from below, and the surface follows within a few seasons.
- Expansive clay slab cracking: Millbrae’s hilly terrain sits on clay soil that swells when wet and shrinks when dry. A slab poured without proper sub-base preparation will crack in regular, predictable patterns that get worse each cycle.
- Post-WWII concrete with no rebar: Many original Millbrae driveways date from the late 1940s through the mid-1960s. Some were poured over raised wood foundations that have shifted, others on early concrete slabs poured without any reinforcement. The result is the sunken, spiderwebbed surface you see all over town.
- Standing water near the flat east side: The stormwater that drains down from the hills pools on east-side blocks near the bayfront. If your driveway is the lowest point on the property, water sits against the slab edge every winter, eroding the base one season at a time.
Pricing for Driveway & Pavers in Millbrae, CA
Here are the numbers we give Millbrae homeowners before we ever write a contract: paver driveway installation runs $7,000 to $18,000; concrete driveway installation runs $4,500 to $12,000; asphalt paving runs $3,500 to $9,000; driveway replacement runs $5,000 to $14,000; paver patio installation runs $3,500 to $11,000; and driveway sealing runs $250 to $700. Your specific price depends on square footage, access to the site, whether we need to remove an existing failed surface first, and what’s under the surface once we break into it. Every estimate we give Millbrae customers is a written line item; every allowance and every change comes as a written change order before the work happens, never as a surprise on the final invoice. Call (877) 610-1318 with your address and we’ll schedule a free estimate.
We Also Serve Cities Near Millbrae
Our Millbrae crews regularly work in the surrounding communities along the lower Peninsula. If your home is just over the line in San Bruno, Burlingame, Hillsborough, or South San Francisco, we’ll bring the same written-scope approach and local familiarity with the same hillside drainage and Bay-side conditions. The full Driveway & Pavers lineup is available throughout the area, and if your project involves more than hardscape, we also handle Kitchen Remodeling in Millbrae with the same pricing discipline.
Serving Millbrae, CA - Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Millbrae
We can usually schedule a site visit in Millbrae within a few business days of your call, and the estimate itself is free. Unlike national outfits that coordinate from out of state, our scheduling runs through our Bay Area office and our crews live and work on the Peninsula. Call (877) 610-1318 and we’ll pick a day that works for you.
We cover all of 94030, from the homes on the west hillside along Millbrae Avenue up to the flat east side near the BART tracks, and everywhere in between. Some of the west-side parcels require additional geotechnical review for retaining work, and we coordinate that with the City of Millbrae’s building department as part of the permit package on eligible jobs.
It can be, though less so for ground-level work than for structures. Millbrae sits within FAA Part 77 airspace obstruction zones tied to SFO’s flight paths. Most driveway and paver projects never trigger an FAA filing because the work is at grade, but if your project includes any temporary crane use or a structure tied to the hardscape that penetrates the imaginary surfaces above the property, we handle FAA Form 7460-1 as standard practice, not an afterthought.
Broadly, Millbrae pricing lands in the same range as Burlingame and Hillsborough because the labor market and material suppliers are shared. What changes the cost is your property: west-side hillside homes with expansive clay often need a deeper base and additional drainage work, which pushes a paver or concrete job toward the upper end of the $7,000-$18,000 or $4,500-$12,000 ranges. East-side flat lots typically price more moderately. The best way to know is to call (877) 610-1318 for a written estimate with actual numbers for your address.
We offer the 90-Day Done Right Promise on every driveway and paver job, written into the contract. If anything isn’t done right, one call brings Tom back to make it right. That promise sits on top of the manufacturer warranties from the paver and material brands we install, and on top of the permit inspections that apply to your project. Call (877) 610-1318 and ask us about the warranty terms for your specific job.
Get Your Millbrae Driveway Estimate
Whether you’re on the western hillside where drainage rules or near the flat bay side where the old slabs are finally giving up, the next step is the same: a free, written estimate with real numbers. Call Barrett & Sons at (877) 610-1318 and Tom or one of his sons will walk the site with you, answer the questions you have, and put the scope in writing before any work begins. We answer the phone 24 hours a day, and we’ll tell you straight whether your driveway needs sealing, repair, or full replacement.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Millbrae since 1998.







Before
After
Before
After
Before
After