Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Marina del Rey
Driveway and paver work in Marina del Rey costs $250 for sealing up to $18,000 for a full paver driveway installation, and most jobs run through a permitting process most out-of-town contractors don’t see coming. Our crews know this community’s ground conditions, its coastal rules, and its older condo stock. If you’re pricing a new paver driveway, a concrete replacement, or a repair along Admiralty Way or Via Marina, call (877) 610-1318 for a written line-item estimate before you sign anything.
Why Barrett & Sons Construction Is Marina del Rey’s Preferred Driveway & Pavers Company
We’ve been an owner-operated company since 1998, and Tom Barrett’s name is on every contract we write in Marina del Rey. When a driveway fails here, it’s rarely the same failure you’d see in Lawndale or Hawthorne. Salt air, liquefaction-prone fill, and unincorporated-county permitting all play a role. We know what to look for because we’ve torn out enough spalled concrete along the marina to know exactly how this community ages.
Every project includes a written scope, written allowances, and written change orders before any extra cost touches the work. Our 90-Day Done Right Promise means Tom himself comes back if something isn’t right. In Marina del Rey, where the Coastal Commission and LA County DPW both have jurisdiction, that kind of accountability matters. The permit inspector works for you, not for me – that’s why I like him.
Our Driveway & Pavers team serves Marina del Rey directly, coordinated from our Los Angeles office. A live person answers the phone 24/7. We don’t route calls to a call center.
Our Driveway & Pavers Services in Marina del Rey
Paver Driveways
A paver driveway in Marina del Rey typically runs $7,000 to $18,000 depending on square footage, base preparation, and drainage requirements. Pavers work well here because they flex with the minor soil movement common on former tidal wetlands. We use Belgard and Techo-Bloc products, and we install geogrid reinforcement on any project where the subgrade is questionable. The permeability of pavers also helps manage the standing water issues that plague older marina-area driveways.
Concrete Driveways & Concrete Work
Concrete driveway installation in Marina del Rey runs $4,500 to $12,000, and the marine layer changes the spec. We use upgraded concrete mix designs with lower water-cement ratios and corrosion-resistant reinforcement because the salt air here attacks embedded rebar faster than it does a mile inland in Mar Vista. If you’re replacing spalled concrete, we’ll also correct the drainage slope that probably caused it. Written change orders cover any alteration before we pour.
Asphalt Driveways & Resurfacing
Asphalt paving for Marina del Rey driveways runs $3,500 to $9,000. It’s a solid choice for longer driveway runs and parking areas, especially on condo properties with multiple units. We handle resurfacing on existing asphalt where the base is still sound. On ground-lease parcels, we verify lessor sign-off before any major resurfacing work begins.
Driveway Repair & Replacement
Full driveway replacement in Marina del Rey runs $5,000 to $14,000. This is the big one, and it’s where your money either goes into the ground or disappears into surprises. We pull permits, we fix the base, and we write every scope item down before the first saw cut. On a condo tower driveway near Admiralty Way, we removed spalled concrete where salt air had corroded the rebar, installed a new paver driveway over compacted aggregate with a geotextile separator, and used epoxy-coated rebar and stainless-steel edge restraints. Because the property sits on an LA County ground lease, we obtained lessor sign-off and a Coastal Development Permit before finishing with a concrete inspection sign-off.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marina del Rey
We install pavers and hardscape products from Belgard and Techo-Bloc, and we don’t stock mystery brands off a van. These are premium names you can look up. For any Marina del Rey driveway or paver job, we order materials from local supply yards and schedule delivery around the building’s access windows – because a concrete truck can’t park on Via Marina during morning rush. If you’re comparing bids, ask the other guy which paver manufacturer he’s quoting. Names matter.
Common Driveway & Pavers Problems We See in Marina del Rey Homes
- Salt-air corrosion of rebar. The persistent marine layer here pushes chloride into concrete, corroding embedded steel and causing spalling within 15 to 20 years. That’s noticeably faster than inland neighborhoods like Mar Vista. We address it with upgraded mix designs, epoxy-coated or stainless reinforcement, and proper cover depth.
- Differential settling on former wetlands. Marina del Rey sits almost entirely on artificially filled tidal marshland inside state-mapped liquefaction hazard zones. If base compaction and geogrid reinforcement are skipped, paver driveways settle unevenly, creating trip hazards and ponding. We geotech anything questionable before we build on it.
- Unpermitted work triggers stop-work orders. This community is unincorporated Los Angeles County, and it’s inside the California Coastal Zone. Alter drainage or add impervious area without the right permits, and you’ll hear from LA County DPW and the Coastal Commission. We pull permits on every eligible job.
- Ground-lease approval gaps. A large share of Marina del Rey parcels sit on LA County ground leases, not fee-simple land. Any substantial structural improvement needs lessor sign-off before work starts. A contractor who’s never worked this side of the marina won’t know to check. We do, on every project.
Pricing for Driveway & Pavers in Marina del Rey, CA
Here’s what driveway and paver work actually costs in Marina del Rey. These are the numbers we quote, and they stay consistent across every job we write in this community.
| Service | Price Range in Marina del Rey |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Driveway Replacement | $5,000 - $14,000 |
| Driveway Sealing | $250 - $700 |
The biggest cost driver in Marina del Rey isn’t square footage – it’s what’s under the slab. Liquefaction-prone fill, old post-tension damage, or a drainage pattern that has to change all move the number. That’s why we write allowances into the contract and issue every price change as a written change order before the work happens. An allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 for a free written estimate, and we’ll walk your driveway with you before we quote it.
We Also Serve Cities Near Marina del Rey
Our crews work throughout the South Bay, and we regularly handle driveway and paver projects in Lawndale, Hermosa Beach, Redondo Beach, and Hawthorne. If you’re a few minutes inland, the permitting and ground conditions change. We adjust the spec accordingly. Call (877) 610-1318 and we’ll tell you what applies to your specific street.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Marina del Rey
Yes, in almost every case. Marina del Rey sits entirely within the California Coastal Zone, and because it’s unincorporated LA County, permits run through LA County DPW as well. Any structural replacement, drainage alteration, or increase in impervious area requires a Coastal Development Permit before work begins. We pull both layers of approval on every eligible job, and the inspection sign-off comes before we call the driveway done. Call (877) 610-1318 and we’ll tell you exactly what your address triggers.
The marine layer keeps moisture and airborne salt in constant contact with your driveway, and that accelerates chloride penetration into concrete. Rebar corrodes faster, the surface spalls sooner, and a standard mix design will fail years earlier than it would in Culver City. We specify upgraded concrete mixes with lower water-cement ratios and corrosion-resistant reinforcement on every marina-area pour. It costs a bit more up front and saves you a full replacement down the line. Call for an exact quote for your site.
Because Marina del Rey was built almost entirely on artificially filled former tidal wetlands, and nearly the whole community sits inside state-mapped liquefaction hazard zones. The fill compresses unevenly under load, so paver driveways settle unless the base is over-excavated, compacted in lifts, and reinforced with geogrid. Culver City sits on native soil, so a standard base works fine there. Here, skipping the geotech or the reinforcement means a wavy driveway within two or three winters. We geotech anything questionable before we build.
Usually not. Replacing a concrete driveway with pavers in Marina del Rey changes the drainage profile and, depending on the paver type, may add impervious area. LA County DPW and the Coastal Commission both review driveway projects that alter runoff. Work done without the right permits can trigger a stop-work order and a violation notice. We pull permits on every job because the last contractor most customers used told them permits were optional. Ask us first – (877) 610-1318 – and we’ll tell you what your address requires.
Permeable concrete pavers are the strongest fit for most Marina del Rey condo properties. They handle the salt air without spalling, they flex with minor ground movement on the wetland fill, and their permeability reduces ponding and runoff – which matters when the Coastal Commission reviews your drainage plan. We use Belgard and Techo-Bloc permeable lines with stainless-steel edge restraints and epoxy-coated rebar in the concrete curb. For exact pricing on your building’s driveway, call (877) 610-1318 and we’ll walk the site with you.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Marina del Rey and the surrounding South Bay communities since 1998.