Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Livermore
A concrete driveway replacement in Livermore typically runs $5,000-$14,000, while a paver driveway install lands between $7,000-$18,000 depending on slope, soil prep, and square footage. Those numbers assume the ground under the slab gets handled correctly, and in Livermore that assumption matters more than in almost any city we serve. We’re Barrett & Sons Construction, owner-operated since 1998, and we work the adobe clay, 100°F pour windows, and fire-zone permit lines of Livermore every week. Call (877) 610-1318 for a free estimate, and you’ll talk to a live person, not a voicemail box.
Why Barrett & Sons Construction Is Livermore’s Preferred Driveway & Pavers Company
Tom Barrett puts his name, his address, and his license number on every contract, and then he shows up on the job site with his sons running the crews. That matters in Livermore, where a lot of folks have been through the national-company wringer: one price on the phone, a different bill at the door, and a subcontractor who’s never set foot in the Tri-Valley before. Ask anyone on your street, or look up the license number yourself. We’ve been at this for over 29 years, and the same families keep calling us back for everything from Livermore Kitchen Remodeling to concrete and pavers.
Our Driveway & Pavers crews work Livermore’s older downtown neighborhoods and the 94550 corridor around Robertson Park as often as the newer tract subdivisions up in 94551. We know which streets sit on the heaviest clay, which blocks trigger hillside fire-zone plan check, and which homes have original 1960s flatwork that’s been heaving for decades. That local knowledge changes the bid before we ever break ground.
Every job gets a written scope, written allowances, and written change orders before any price moves. The permit inspector works for you, not for me, and we pull permits on every eligible job. That’s the Barrett & Sons way in Livermore: scope in writing, inspections signed, and a 90-Day Done Right Promise on the contract.
Our Driveway & Pavers Services in Livermore
Concrete Driveways & Concrete Work
A new concrete driveway in Livermore runs $4,500-$12,000, and the variance comes down to what’s under the slab. Homes near downtown and the Robertson Park corridor sit on adobe clay that swells in wet winters and shrinks hard in summer, so we over-excavate and recompact a Class 2 aggregate base before any pour. On the newer North Livermore pads, the engineered subgrade is better, but the summer heat still compresses the finishing window.

Paver Driveways
Paver driveway installation in Livermore typically runs $7,000-$18,000. Pavers flex with clay movement instead of cracking like a rigid slab, which is why they’re the smarter choice for a lot of the older 94550 homes. We install Belgard and Techo-Bloc product lines, and we’re direct about what the paver joint sand, base depth, and edge restraint will cost before we start, never after.

Asphalt Driveways & Resurfacing
For a long, flat Livermore driveway, asphalt paving runs $3,500-$9,000, and resurfacing a tired existing asphalt drive sits at the lower end. Asphalt holds up fine in high heat as long as the base is stable, and on the expansive clay that means addressing drainage at the edges so winter moisture doesn’t undermine the section. We do full teardown and re-grade when the old base has failed.

Driveway Repair & Replacement
Replacement runs $5,000-$14,000 in Livermore, and we always look for the root cause before recommending a teardown. A settled 1960s slab with a 2-inch lip at the garage apron may be liftable, or it may need full removal and re-pour with a French drain at the property line. We write the scope after we inspect, not before, so the number on your contract is the number you pay.
Key Takeaways

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Livermore
We stock Belgard and Techo-Bloc pavers for Livermore jobs, and we carry GAF underlayment and flashing products for Roofing - Livermore projects and the adjacent flatwork and site-drainage details that driveway jobs trigger. When a Livermore homeowner wants a specific paver color or finish, we can source it fast through our local supplier network, not some out-of-state warehouse. Materials you can look up, not mystery brands off a van.
Common Driveway & Pavers Problems We See in Livermore Homes
- Heaving from adobe clay under the slab. Winter rain soaks into the expansive soil, the clay swells and lifts the slab unevenly, then a 105°F July bakes it dry and the ground shrinks, leaving voids under the edges. That cycle is why 1950s-1970s ranch driveways near downtown Livermore crack at the corners and separate at the apron.
- Summer plastic shrinkage cracking on fresh pours. A west-facing driveway poured in August loses water so fast in 105°F heat that surface cracks appear within hours unless the finisher uses evaporation retarders and shade breaks. Coastal crews underestimate how fast the Altamont heat pulls moisture from a slab.
- Fire-zone plan check surprises on hillside lots. A paver driveway on a lot east of Vasco Road in the High or Very High Fire Hazard Severity Zone can trigger Chapter 7A ignition-resistant requirements for adjacent flatwork, defensible-space setbacks, and non-combustible edging. The same design a half-mile downhill in the valley bypasses all of it.
- Slab-to-foundation drainage failures. We regularly see driveways in 94550 that slope toward the garage or foundation, feeding water into the expansive soil at the worst possible place. A proper driveway replacement should include a drain detail that moves water away from the structure, and we write that into the scope.
Pricing for Driveway & Pavers in Livermore, CA
A typical driveway replacement in Livermore runs $5,000-$14,000 all-in, with concrete installs at $4,500-$12,000 and paver driveways at $7,000-$18,000. What moves the number is the soil prep under the slab, the fire-zone requirements if you’re on the hillside, and the linear feet of drainage work at the edges. We give written line-item quotes, not phone guesses, and the scope you sign is the scope we build. Call (877) 610-1318 for an exact quote, and we’ll walk you through the numbers before you sign anything.
| Service | Livermore Price Range |
|---|---|
| Concrete Driveway Installation | $4,500-$12,000 |
| Paver Driveway Installation | $7,000-$18,000 |
| Driveway Replacement | $5,000-$14,000 |
We Also Serve Cities Near Livermore
Our Driveway & Pavers in Livermore crews also cover Pleasanton, Dublin, San Ramon, and Blackhawk. If you live in one of those communities, the same Barrett & Sons team, the same written change orders, and the same 90-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, and crews work Livermore locally.
Serving Livermore, CA - Our Local Coverage Area
We’re based in the Livermore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Livermore
A straight replacement of an existing driveway at the same elevation and footprint generally does not require a building permit in Livermore, but any change to drainage patterns, new flatwork that alters site water flow, or work adjacent to a hillside fire-zone boundary may trigger plan check. We verify permit requirements block by block before we write the scope, and if a permit is needed, we pull it and get the inspection signed. Call (877) 610-1318 and we’ll tell you what your specific parcel requires.
Lots east of Vasco Road in the High and Very High Fire Hazard Severity Zones often trigger Chapter 7A ignition-resistant requirements, defensible-space setbacks, and non-combustible edging on paver and flatwork permits, and those materials and plan-check steps add real cost. A paver driveway a half-mile downhill in the valley floor typically bypasses those requirements entirely, so the per-square-foot price is lower. We price from the actual plan-check conditions for your parcel, not a blanket rate.
You can pour in Livermore’s July heat, but the finisher has to manage moisture loss aggressively: evaporation retarders, shade breaks, and adjusted set times to prevent surface plastic shrinkage cracking. Coastal crews who don’t pour in 100°F+ heat routinely lose slabs to those surface cracks. We schedule Livermore summer pours for the early morning window and adjust the mix and finishing sequence accordingly.
Some settled Livermore slabs can be lifted with polyurethane foam injection, but if the underlying adobe clay has heaved unevenly and drainage is feeding the problem, lifting alone won’t hold. We inspect the slab, the subgrade, and the drainage path before recommending anything, and we’ll give you a written scope for whichever approach is right, not whichever is easiest to sell. Estimates are free.
A full driveway replacement in Livermore runs $5,000-$14,000, including over-excavation of the expansive clay, recompaction of a Class 2 aggregate base, new slab placement with rebar, and drainage work at the property line where needed. Paver driveways land at $7,000-$18,000 depending on fire-zone requirements and edge details. Call (877) 610-1318 with your address and we’ll give you a written line-item quote.
Ready to talk? We answer the phone live 24/7, and estimates are free. Call (877) 610-1318 to schedule yours, or ask for Tom directly, he’s probably twenty minutes from your street.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Livermore since 1998.







Before
After
Before
After
Before
After