Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Farmers Branch
Driveway and paver work in Farmers Branch costs between $4,500 and $18,000 for most full installations, and the price depends heavily on one thing most suburbs never think about: the black clay under your slab. We’re Barrett & Sons Construction, and we’ve spent nearly three decades watching how Farmers Branch’s mid-century homes move with the seasons. If you live off Josey Lane or Valley View, you already know the signs: a driveway that’s sunk two inches at the garage approach, pavers that tilt toward the house, cracks that open wider every August. Call us at (877) 610-1318 for a free estimate. We’ll look at your lot before we quote it.
Why Barrett & Sons Construction Is Farmers Branch’s Preferred Driveway & Pavers Company
Farmers Branch isn’t a city where you can send a crew that’s never worked the soil here and expect it to go well. The residential streets in 75234 are full of single-story brick ranches built between the late 1950s and early 1970s, and almost every one of them sits on a slab that’s been through fifty-plus North Texas drought-and-rain cycles. That’s why our crews are Tom’s sons and their teams, not strangers dispatched from a call center. We know what a post-tension slab edge does to a paver border, and we know what the city inspector looks for on a narrow lot near LBJ Freeway.
Tom Barrett founded this company in 1998 and still answers his own phone. When you call, you get a live person, 24/7. Every job gets permits pulled and inspections signed when they’re required. Every price change arrives as a written change order before work starts. And every job carries the 90-Day Done Right Promise, written on the contract. If it’s not done right, one call brings Tom back.
The permit inspector works for you, not for me. That’s why I like him. We pull permits on eligible driveway and paver jobs in Farmers Branch because the city checks base prep, drainage, and setbacks, and we’d rather have a third-party inspector sign off than leave you with a driveway that fails two years in.
Our Driveway & Pavers Services in Farmers Branch
This page covers the work we do most often in Farmers Branch. For the full picture, visit our Driveway & Pavers page. Here’s what matters locally:
Concrete Driveways & Concrete Work
A new concrete driveway in Farmers Branch runs $4,500 to $12,000, and the prep matters more than the pour. Original 1960s slabs here were often poured without rebar, and decades of clay-driven heave leave voids under the edges. Before we pour, we compact the base and install a moisture barrier so the new slab isn’t fighting the same soil movement the old one lost to. We also dowel new concrete into existing porch slabs where they meet, so the two move as one unit instead of cracking at the joint.
Paver Driveways
Paver driveway installation in Farmers Branch runs $7,000 to $18,000. Pavers handle clay movement better than poured concrete because the joints flex instead of cracking, but only if the base is right. We excavate deep enough to remove the worst of the expansive layer, then build up with compacted aggregate before laying the pavers. On a tight Farmers Branch lot, that means careful staging: we bring materials in small lifts and keep the paver stacks off the lawn so we don’t leave ruts in your neighbor’s view.
Asphalt Driveways & Resurfacing
Asphalt paving in this part of Farmers Branch runs $3,500 to $9,000. Asphalt is less common on the residential streets near Josey Lane, where concrete and brick dominate, but it shows up on longer approaches and commercial edges along the LBJ corridor. The same clay movement applies, and we treat the subgrade the same way: remove the problem soil, compact properly, and don’t just lay asphalt over a heaving base.
Driveway Repair & Replacement
Full driveway replacement in Farmers Branch runs $5,000 to $14,000. If it’s a repair instead, we quote the scope in writing before any saw-cut happens. We were called to a 1963 brick ranch near Josey Lane where the concrete driveway had cracked along the expansion joint and sunk two inches at the slab edge from decades of black clay heave. Our crew saw-cut the failed section, removed the old pour, and prepped a compacted base with a moisture barrier before repouring. We tied the new concrete into the existing porch slab with dowels so it would move as one unit during the next drought. The homeowner approved the scope in writing, and we pulled the permit so the city’s third-party inspector could sign off on the base before the pour.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We carry premium materials you can look up by name, not mystery brands off a van. For hardscapes in Farmers Branch, that means Belgard and Techo-Bloc pavers, Schluter for drainage and edge details where they matter, and GAF products when a driveway project ties into adjacent roof drainage work. When you need paver colors or edge profiles matched to a 1960s brick ranch, we source from local suppliers who stock what Farmers Branch homes actually use, which means shorter lead times and a driveway that looks like it belongs on your street.
Common Driveway & Pavers Problems We See in Farmers Branch Homes
These are the failure modes we see again and again in 75234. None of them are surprises to us.
- Garage approach cracks. Clay contraction during summer droughts leaves a void under the old slab edge right where the driveway meets the garage. Original 1960s pours often lacked rebar, so the edge cracks and sinks. The fix starts with removing the failed section and rebuilding the base, not just patching the top.
- Paver patios sinking along the house line. Post-tension slab edges heave at a different rate than the paver base, which creates a lip where the patio meets the foundation. That lip becomes a trip hazard and a ponding spot after rain. We address the grade before we address the pavers.
- Street-side walkway and apron failures. Farmers Branch enforces curb-cut setbacks written for 50-foot frontages. On a narrow lot, that means a last-minute surprise if your contractor doesn’t know the local rules. We check setbacks before we quote, so the number on the estimate is the number on the bill.
- Cracks that open wider every August. If you see a crack that closes up after rain and opens in the heat, that’s clay movement, not bad concrete. Patching it without addressing the soil underneath is a temporary fix. We’ll tell you honestly whether a repair makes sense or a replacement is the smarter money.
Pricing for Driveway & Pavers in Farmers Branch, TX
Here are the numbers we quote most often in Farmers Branch. These are real ranges for this market, not national averages.
| Project | Farmers Branch Price Range |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Driveway Replacement | $5,000-$14,000 |
What moves the number on a Farmers Branch job: access to the site, how much failing clay we have to excavate, whether the city requires a curb-cut adjustment on your frontage, and what’s under the existing slab. We don’t quote blind. We walk the lot, check the grade, and give you a written line-item estimate. The price on that estimate is the price you pay unless a written change order comes first. Call (877) 610-1318 for a free estimate.
We Also Serve Cities Near Farmers Branch
We’re based in the Dallas-Fort Worth area and schedule crews locally across the inner-ring suburbs. If you’re in Farmers Branch or the surrounding communities, we cover Addison, Carrollton, Irving, and Coppell with the same crews and the same written-scope approach. The clay doesn’t stop at the city line, and neither do we.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Farmers Branch
In most cases, yes. Farmers Branch requires permits for driveway and paver work that changes the footprint, grade, or curb-cut configuration. We pull the permit for you and coordinate the inspection, so the city’s third-party inspector signs off on the base before the pour. The permit inspector works for you, not for us, and that’s exactly how we like it. Call (877) 610-1318 and we’ll check your specific lot.
That crack is almost always clay movement. Your front walkway was poured as part of the original slab or tied to it, and the driveway edge has settled at a different rate over fifty-plus years of drought-and-rain cycles. The two pieces move independently, and the joint between them fails. We fix it by doweling new concrete into the existing walkway so everything moves as one unit. Price depends on how much of the old pour has to come out.
We stage in small lifts. On a tight lot near Josey Lane or Valley View, we bring paver pallets and aggregate loads in smaller quantities and keep them on the driveway or the street apron, never on the lawn or a neighbor’s property. We tarp the work area at the end of each day, and we clean up as we go, not just at the end. Your neighbors will appreciate it, and so will your grass. Call (877) 610-1318 to talk through your specific site.
Not if the base is done right. The reason original 1960s slabs here fail is that they were poured without modern soil-moisture management, which means no deep compaction, no moisture barrier, and often no rebar. We excavate the problem layer, compact the base properly, install a barrier, and use steel where it matters. No driveway is crack-proof on North Texas clay, but a properly prepped slab will move as a unit instead of snapping at the edges.
We follow the city’s work-hour ordinances and keep the loud work, saw-cutting and compaction, inside normal daytime hours. For a typical driveway replacement, that means starting after the morning rush and wrapping before the evening one. We also warn neighbors when we know a saw-cut phase is coming, because a little notice goes a long way on a street where houses sit close together. Get a free estimate at (877) 610-1318.
Call Barrett & Sons Construction for Driveway & Pavers in Farmers Branch
If your driveway is cracking, sinking, or just looks like a 1960s slab that’s done its time, call us. We’ll walk the lot, check the grade, and give you a written estimate with real numbers, not a range pulled from a national chart. Tom Barrett’s name, address, and license number are published and verifiable, and the 90-Day Done Right Promise is on every contract. Call (877) 610-1318 to schedule your free estimate in Farmers Branch.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving the Dallas-Fort Worth area since 1998.