Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Anderson Mill
Driveway and paver work in Anderson Mill runs $3,500 to $18,000 for most projects, with concrete driveways landing between $4,500 and $12,000 and paver installations running $7,000 to $18,000. The price depends on square footage, what’s underneath the old surface, and whether your block falls under Williamson County or Travis County permit rules. Barrett & Sons Construction has worked both sides of that county line for over 29 years, and Tom Barrett’s crew knows exactly which office to call before a single shovel hits the ground. Call (877) 610-1318 for a free estimate, and we’ll walk the project with you.
Why Barrett & Sons Construction Is Anderson Mill’s Preferred Driveway & Pavers Company
Anderson Mill is different from Cedar Park or Austin proper in one specific way: the same street can have homes under two different county building departments. That matters when you’re pulling a permit for a driveway replacement, because the Georgetown office and the Travis County office run on different timelines and different code amendments. We’ve navigated both for years, so we don’t show up surprised and we don’t hand you change orders because permits took longer than expected. You see the scope in writing before work starts, and every price change is a written change order. That’s how Tom has run things since 1998.
Most of our Anderson Mill work comes from neighbors talking to neighbors. We’ve replaced driveways off Pond Springs Road, repaired paver aprons near Lake Creek Parkway, and handled sealing jobs in the El Salido corridor. Homeowners here tend to be thorough. They check the license number, ask who’s actually on-site, and read the contract before signing. We publish Tom Barrett’s name, address, and license number. Look it up. Then call with questions. A live person answers 24/7, not a voicemail box.
Our Driveway & Pavers Services in Anderson Mill
Our Driveway & Pavers team handles everything from new concrete pours to full paver driveway replacements. Here’s what we do most often in Anderson Mill:
Paver Driveways
A paver driveway in Anderson Mill typically runs $7,000 to $18,000 depending on square footage and paver brand. We install Belgard and Techo-Bloc almost exclusively, because these manufacturers publish their specs and warranties, and you should know what’s going into the ground. Pavers handle the Blackland Prairie clay better than monolithic concrete in one important way: individual pavers can be lifted and re-leveled if the ground shifts, rather than cracking like a solid slab.
Concrete Driveways & Concrete Work
New concrete driveways in Anderson Mill run $4,500 to $12,000. The biggest variable here isn’t concrete cost. It’s the soil underneath. Anderson Mill sits where the expansive Vertisol clay of the Blackland Prairie transitions into Hill Country limestone, and that clay heaves through wet-dry cycles. We compact a limestone base that accommodates that movement, then pour 4-inch reinforced concrete with expansion joints at the garage and walkway transitions. Skimp on the base here and you’ll be replacing the slab again in a decade.
Asphalt Driveways & Resurfacing
Asphalt paving in Anderson Mill runs $3,500 to $9,000 for a standard two-car driveway. Resurfacing over an existing asphalt base comes in lower, but only if the base is stable. We’ll level and compact what’s already there, then lay fresh asphalt with proper drainage slope. Asphalt works fine in this climate, though the summer heat can soften a poor mix. We use a plant-mixed hot mix rated for Central Texas temperatures, not whatever’s cheapest off the truck.
Driveway Repair & Replacement
Full driveway replacement in Anderson Mill runs $5,000 to $14,000. Repair work, like cutting out a cracked section or patching a spalled area, runs lower but site-specific. We don’t give a quote-over-the-phone that changes when we show up. You get a written line-item scope before we start, and if the old driveway hides something we couldn’t see until demo, that’s a written change order. Not a surprise invoice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anderson Mill
We stock and install brands with published specifications, so you can look up exactly what’s going into your driveway. For paver work, we run Belgard and Techo-Bloc. For any adjacent hardscape or exterior finishes, we carry GAF underlayments and accessories where relevant. If you’re replacing a driveway and also planning a patio or pool deck, we’ll coordinate the material order so colors and patterns match across the whole hardscape. No mystery brands off a van.
Common Driveway & Pavers Problems We See in Anderson Mill Homes
- Post-tension slab heave transferring to the driveway apron: Most Anderson Mill homes were built between 1976 and 1988 on post-tension concrete slabs. When the underlying clay expands and contracts, the slab moves, and that movement can crack the driveway where it meets the garage. We see this constantly on split-level homes off Pond Springs Road and in the El Salido area.
- HOA architectural rejections on paver color or pattern: Several newer and master-planned pockets in Anderson Mill have architectural committees that must approve paver colors, patterns, and even edge restraints before work begins. We’ve handled enough of these to know what gets kicked back, and we’ll help you submit the right materials the first time.
- Limestone bedrock driving up trenching cost: The Hill Country transition zone means shallow caliche and limestone in parts of Anderson Mill. If you’re installing paver edge restraints or drainage, trenching can be more expensive than in sandier soils east of I-35. We flag this before quoting so you’re not blindsided.
- Original 1970s and 1980s concrete nearing end of life: The original driveways poured when these homes were built are now 40 to 50 years old. Most have outlived their useful life, with spalling, cracking, and settlement at the garage transition. Replacement isn’t premature. It’s overdue.
Pricing for Driveway & Pavers in Anderson Mill, TX
Here are the real numbers for Anderson Mill projects. These are installed prices, not material-only figures, and they include labor, base prep, and standard drainage.
| Service | Typical Range in Anderson Mill |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Driveway Replacement | $5,000 - $14,000 |
| Driveway Sealing | $250 - $700 |
What moves the number most: square footage, access for equipment, whether the old surface needs full removal, and whether we’re trenching into limestone or working with clay that’s already compacted. HOA requirements can also shift material costs if a specific paver color or pattern is mandated. We’ll give you a written line-item quote before you decide anything. Estimates are free. Call (877) 610-1318 to schedule one.
We Also Serve Cities Near Anderson Mill
Our crew works throughout the Austin metro area, and we regularly run jobs in Jollyville, Brushy Creek, Cedar Park, and Wells Branch. If you’re just outside Anderson Mill, call anyway. We’ll let you know if we make the drive. And if you’re still researching, our Anderson Mill page covers the broader service area and what to expect when you call.
Serving Anderson Mill, TX - Our Local Coverage Area
We’re based in the Anderson Mill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Anderson Mill
Yes, most driveway replacements and new paver installations in Anderson Mill require a permit, and which office issues it depends on your block. Anderson Mill straddles unincorporated Williamson County and Travis County, so one side of the street may pull permits through Williamson County in Georgetown while the other goes through Travis County. The timelines differ. We handle both, and we’ll tell you which one applies before we quote. Call (877) 610-1318 and we’ll check your address.
Yes. Several Anderson Mill communities have architectural committees that enforce specific paver colors, patterns, and edge treatments. If the HOA requires a submitted design, we’ll help you prepare the documentation. If they reject something mid-project and you need to switch materials, that’s a written change order with a clear new price. Not a surprise at the end. Call (877) 610-1318 and we’ll walk through what your HOA package says.
It can be either, but in Anderson Mill it’s often both. Many homes here sit on post-tension concrete slabs over expansive clay. When the slab heaves, stress transfers to the driveway apron where it meets the garage. We saw this exact failure on a split-level brick-veneer home off Pond Springs Road. The fix was removing the old concrete, compacting a limestone base, and pouring a new reinforced slab with expansion joints at the garage and walkway. That project stayed on the Travis County side, so we pulled permits through the county’s Austin-area inspector, and final sign-off came the same week we poured. Call (877) 610-1318 and we’ll come look.
Usually yes, but you need to check the warranty terms first. A driveway is typically considered a separate hardscape element, not part of the structural frame. Replacing it won’t void most builder warranties, but we’ll review the language with you before we dig. If there’s any interaction with the foundation or garage slab, we’ll flag it and tell you what to ask the builder. We won’t start until the scope is in writing.
Most paver driveways in Anderson Mill take four to seven working days from demo to final compaction, assuming there’s no limestone trenching that slows edge restraint installation and no HOA back-and-forth on materials. Permit timing can add days if your block falls under Williamson County, since the Georgetown office runs on a different schedule than Travis County. We’ll give you a written timeline with your quote. Call (877) 610-1318 and we’ll schedule a walkthrough.
Ready to talk? Call (877) 610-1318 and ask for Tom or one of his sons. We’ll come out, look at the ground, check the county line, and tell you what it’ll cost. Written scope, written change orders, and a 90-Day Done Right Promise on every job. That’s how we’ve done it since 1998.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Anderson Mill and the surrounding Austin metro area since 1998.