Wellborn Driveway & Pavers Nationwide | Barrett & Sons Construction

Wellborn Driveway & Pavers: The Los Angeles Owner’s Guide

If your Wellborn driveway or paver system has a failing part, we stock and install Wellborn-compatible components across Los Angeles, with most driveway and paver replacements running $4,130 to $21,240 depending on scope and material. Same-week installation is typical once we confirm the exact Wellborn part number and your site conditions. Most homeowners discover the problem the hard way: a paver shifts underfoot, a drain channel separates, or a section of the driveway settles after a rain and the car scrapes on the way in.

Call (877) 610-1318

We’re an independent Los Angeles contractor, not affiliated with Wellborn, but we’ve worked on enough Wellborn driveways and paver systems in this city to know exactly which parts fail first and what actually fixes them.

Which Wellborn Models This Applies To

Wellborn driveways and paver systems aren’t one-size-fits-all, and the part you need depends on which line was installed. We routinely work on Wellborn’s concrete paver systems, their permeable paver lines, and the segmented driveway edge restraints that Wellborn matched to their paver profiles. Here’s the compatibility gotcha most Los Angeles owners run into: Wellborn’s interlocking pavers from the mid-2000s use a slightly taller edge lip than their current production, so a replacement edge restraint ordered without checking the lip height ends up sitting proud of the paver face. We measure before we order, every time.

To identify your Wellborn part, check the underside of a removed paver for the stamped Wellborn logo and a four-digit mold code. That code tells us the production run and paver dimensions. For edging and drains, the part number is usually stamped on the inside face of the channel. If you can’t find it, we’ll match the part by measurements on site before we quote anything.

On the OEM versus aftermarket question: for Wellborn’s structural edging and drainage channels, we order OEM from Wellborn’s distribution network because the dimensions are critical and the cost difference is small. For standard replacement pavers, quality aftermarket products from Belgard or Techo-Bloc sometimes offer a better color match to a sun-faded Los Angeles driveway than a fresh OEM paver would, and we’ll tell you which looks right before you spend a dime.

Signs Your Wellborn Driveway & Pavers Is Failing

• Pavers rock or wobble underfoot. This usually means the sand bedding underneath has washed out through a failed edge restraint or a cracked drain channel. In Los Angeles, our winter rain bursts erode bedding faster than people expect, especially on sloped driveways in the hills.
• A visible sinkhole or depression forms in one section. The base course underneath has settled or washed away. On Wellborn driveways we’ve seen this most often where a downspout discharges directly onto the paver edge, undermining the sub-base over a few seasons.
• Edge restraints are cracked or pulling away from the pavers. Once the edge lets go, the whole field starts migrating outward. You’ll see a widening gap at the grass line or along a curb. This is the single most common Wellborn failure we see in Los Angeles.
• Water pools on the surface instead of draining. Wellborn’s permeable systems clog with silt over time, especially near landscaped beds. A clogged permeable paver doesn’t just puddle, it stops doing the stormwater job it was designed for.
• You hear a hollow sound when you tap a paver with a rubber mallet. That means the paver has separated from the bedding layer. It’s not urgent by itself, but it’s an early warning that the base is starting to move.

Replacement Cost & What’s Included

For Los Angeles Wellborn driveway and paver work, here’s what pricing typically looks like:

• Paver driveway installation: $8,260-$21,240
• Concrete driveway installation: $5,310-$14,160
• Driveway replacement: $5,900-$16,520
• Paver patio installation: $4,130-$12,980
• Driveway sealing: $295-$825

What moves the number is mostly site access, the condition of the base underneath, and whether we’re replacing a section or the whole field. A small edge restraint repair in a flat Los Angeles front yard costs a fraction of a full hillside driveway rebuild with base compaction. Every quote from us breaks down parts and labor separately, in writing, before work starts. If the scope changes mid-job, you get a written change order first. And every Wellborn repair carries our 90-Day Done Right Promise: if it’s not right, Tom Barrett comes back and makes it right.

DIY or Call Us?

Some things are safe to check yourself. You can inspect your edge restraints for cracks, look for paver movement, and clear surface debris from drain channels. A garden hose will tell you whether water is pooling where it shouldn’t. What you shouldn’t do is start pulling pavers and re-bedding sand on a sloped Los Angeles driveway. Improperly compacted base on a slope leads to a paver field that slowly slides toward the street, and that’s a much bigger job to fix than the original repair would have been. Once the base is compromised, you need compaction equipment and the right crushed stone spec, not a bag of play sand from the hardware store.

If you’re not sure what you’re looking at, call us at (877) 610-1318. We’ll come out, tell you what’s actually wrong, and quote it in writing. No trip charge inside Los Angeles County.

FAQs