Wellborn Bathroom Remodeling Nationwide | Barrett & Sons Construction

Wellborn Bathroom Remodeling: The Los Angeles Owner’s Guide

If your Wellborn bathroom vanity, cabinet, or hardware has failed and you’re weighing repair against replacement, here’s the straight answer: a full Wellborn-compatible bathroom remodel in Los Angeles typically runs $10,620 to $33,040 installed, and we can usually get your project scheduled within two to three weeks of your written estimate. Most owners discover the problem the same way: a drawer face that won’t stay aligned, a soft-close hinge that’s given up, finish peeling at the base near steam from the shower, or a vanity top that’s delaminated around the sink rim.

Call (877) 610-1318

We’re Barrett & Sons Construction, an independent Los Angeles contractor and we’re not affiliated with Wellborn. What we are is the crew that’s been installing and rebuilding Wellborn bathroom cabinetry across Los Angeles for over 29 years. Tom Barrett grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, and he’ll be the first to tell you that a failed cabinet part is rarely just the part. It’s the humidity, the original install, or the way the room was ventilated, and until you know which one you’re fixing, you’re guessing.

Key takeaways:

• Wellborn bathroom remodeling in Los Angeles runs $10,620 to $33,040 installed, depending on scope and materials.
• We stock common Wellborn-compatible hinges, slides, and drawer guides on the truck for service calls.
• Written change orders before any scope change, permits pulled on eligible jobs, and the 90-Day Done Right Promise in writing on every contract.
• Call (877) 610-1318 for a free estimate on a Wellborn repair or full remodel.

Which Wellborn Models This Applies To

Wellborn has built bathroom cabinetry across several lines over the years, and the part that fits depends on which line and which production era you’re dealing with. The Wellborn Estate, Premier, and Select series share a lot of the same drawer slide and hinge hardware, but the door profiles and finish codes changed over time. The cabinetry tags are your friend here: open the drawer box and look for a white or foil label on the inside left or right panel. That label carries the cabinet series, the finish code, and sometimes the production date, and that’s what we use to match parts without guesswork.

One compatibility gotcha we see regularly in Los Angeles homes: Wellborn vanities installed before roughly 2010 often used a 3/4-inch thick drawer box with epoxy-coated slides, while later production moved to undermount soft-close slides that mount differently. You can’t swap one for the other without changing the drawer box or the mounting rails. Another: Wellborn’s painted finishes, especially the whites and light grays, used a catalyzed conversion varnish that handles Los Angeles humidity well, but repeated steam exposure from a poorly vented shower will eventually lift the finish at the bottom rail. That’s a refinish or a door replacement, not a hinge problem.

If you’re replacing a single drawer front or door, OEM Wellborn parts will match the original finish code best. But for hardware like hinges and slides, quality aftermarket equivalents from Blum or Salice often perform as well or better, and they cost less than dealership pricing. We’ll show you both options, side by side, with prices in writing, before any work starts.

Signs Your Wellborn Bathroom Remodeling Is Failing

• Drawer faces sagging or rubbing against the cabinet frame. This is almost always a worn or bent drawer slide, and on older Wellborn boxes it’s accelerated by the weight of heavy bathroom items and years of humidity cycling. The fix is new slides matched to your box thickness, not tightening screws.
• Soft-close doors slamming or not staying shut. The damper inside the hinge has failed, which happens faster in bathrooms because steam carries soap and mineral residue into the hinge body. You’ll replace pairs, not singles, or the door will sit crooked.
• Finish peeling, bubbling, or cracking at the bottom of doors and drawer fronts. This is a moisture problem from the shower, and unless the ventilation is fixed, a refinished or replaced door will fail again in a few years. We’ll tell you that before you spend the money.
• Vanity top pulling away from the cabinet or delaminating at the sink rim. Water has been sitting at the seam, and once the substrate swells, the top is done. This is also the moment to check for hidden cabinet damage underneath.
• A musty smell inside the cabinet that won’t go away. That’s mold or mildew in the cabinet box, usually behind the toe kick or inside the sink base. You’re probably looking at replacing the cabinet box, not cleaning it.

Replacement Cost & What’s Included

A full Wellborn-compatible bathroom remodel in Los Angeles runs $10,620 to $33,040 installed. Where your project lands depends on whether we’re replacing a single vanity or rebuilding the whole bathroom: the vanity and countertop are the smaller end, and a full gut with a new shower, flooring, lighting, and plumbing moves you toward the top. Here’s the line-item breakdown we give every customer before they commit:

• Bathroom vanity replacement (stocked Wellborn-compatible or custom): $945 to $3,540 installed
• Small bathroom remodel (vanity, top, faucet, mirror, paint): $5,900 to $14,160
• Full bathroom remodel (gut to finish, new everything): $10,620 to $33,040
• Walk-in shower conversion: $5,310 to $14,160
• Tub-to-shower conversion: $4,130 to $11,800

Every quote includes the parts, the labor, the haul-away, and the permit pull when the job needs one. You’ll never see a surprise invoice at the end, because Tom Barrett writes every change into a change order and puts it in front of you before a single nail moves. All of it is backed by the 90-Day Done Right Promise: if it’s not done right, one call brings us back to make it right.

DIY or Call Us?

You can safely check a few things yourself before you call. Open the drawers and look at the slide rails for obvious bends or broken clips. Snap a photo of the cabinet label inside the drawer box so we can identify the series and finish code. Check under the sink for water stains that tell you whether the cabinet box itself is compromised. None of that requires tools.

What we don’t recommend is trying to replace drawer slides, hinge pairs, or cabinet boxes on your own if you’ve never done it. Drawer slides have to be shimmed level, and if they’re off by a sixteenth of an inch the drawer will bind or rack. Hinge replacement on a Wellborn door requires the exact overlay and bore pattern, and drilling a new bore into a finished door is a one-shot deal. And if the cabinet box has water damage, you’re not fixing it with putty. Call (877) 610-1318 and we’ll look at it, and if it’s a small repair we’ll tell you that honestly, even if a remodel is what you eventually need.

FAQs