Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Irvine, CA | Barrett & Sons Construction
We provide independent Tremron paver installation, repair, and hardscape construction across every Irvine village, from University Park to Great Park. What sets our Tremron work apart here is simple: we know which paver lines, colors, and laying patterns each village’s Architectural Review Committee will approve before we order a single block. That dual-permit knowledge saves Irvine homeowners weeks of delay and thousands in potential tear-out costs. Call (877) 610-1318 for a free estimate on any Tremron project. We are Tremron sales & service specialists, not a manufacturer affiliate.
Why Irvine Residents Choose Us for Tremron Service
Tom Barrett started Barrett & Sons in 1998, and for nearly three decades we have been the name on the truck, not a franchise dispatching strangers. When we lay Tremron pavers in Irvine, one of Tom’s sons is on-site running the crew. That matters here because Irvine is not a city where you can drop a generic paver patio into any backyard and walk away. Each village enforces its own hardscape palette, and we have been through enough ARC submittals in Woodbridge, Northwood, and Turtle Rock to know exactly what gets signed and what gets sent back. We stock genuine Tremron pavers, edge restraints, and matching joint sand, so repairs blend with the existing hardscape instead of standing out like a patch.
Common Tremron Construction Problems We Solve in Irvine
- Paver shifting and heaving on expansive clay. Irvine’s hillside villages, especially Turtle Rock and Quail Hill, sit on clay soils that swell after winter rains and shrink in summer. Sand-set Tremron patios and driveway edges move with that cycle, lifting pavers and creating trip hazards that HOA inspectors flag for correction. We recompact the base and reset the pavers so they stay put.
- Polymeric sand erosion on slopes. Sloped yards in Turtle Rock and Quail Hill lose joint sand faster than flat lots. Santa Ana-driven rain and irrigation runoff wash the sand out, weeds move in, ants follow, and the paver base starts to shift. We re-sand with a polymeric blend that holds up to Irvine’s slope drainage.
- Santa Ana wind abrasion on tumbled pavers. Great Park and Portola Springs sit wide open when the winds come down the canyons. Tremron tumbled pavers with color-enhanced finish take a beating, dulling well before coastal installations do. We reseal and, where needed, rework the finish to restore a uniform look.
- Efflorescence from irrigation overspray. Woodbridge and Westpark lots are tight, and sprinklers often hit newly installed Tremron pavers while they are still curing. That white bloom shows up fast. We clean it and adjust the curing process on future installs to prevent it.
- Settlement holes in older village driveways. University Park and Woodbridge driveways poured in the 1970s and 1980s sometimes drop where post-tension slab edges have failed. Tremron pavers laid over those spots dip with the base. We remove the pavers, rebuild the base properly, and relay them in the original pattern.
Tremron Service in Irvine: What Local Conditions Mean for Your Equipment
Here is the thing most contractors miss when they take a Tremron job in Irvine, and it is the reason we get called in to fix work that was just installed. Irvine HOA Architectural Review Committees in villages like University Park and Woodbridge require that any Tremron paver addition match the exact paver type, color, and laying pattern specified in the original tract’s hardscape palette. A contractor who unilaterally swaps in a newer Tremron line, even a nicer one, can face a mandatory tear-out at their own expense before the city finalizes the permit. We have seen it happen. That means the Tremron expertise that matters in Irvine is not just knowing paver lines. It is knowing which line each village approved when the tract was built, and which current Tremron products read as a true match. In Northwood, a homeowner’s 1990s Tremron Cobble Paver driveway had dipped into a settlement hole from a broken post-tension slab edge. Our crew pulled the original pavers, overexcavated the failed base, added engineered fill and geogrid to stabilize the expansive clay boundary, then relayed the same Cobble pavers in the original 45-degree herringbone so the HOA ARC signed off with zero revision requests. That is the difference between a contractor who has done Irvine work and one who is about to learn the hard way.
Tremron Models & Products We Service in Irvine
We install, repair, and replace the Tremron lines most common in Irvine’s villages: the Cobble Paver Series, Holland Stone, Tremron Tumbled Pavers, and Mega Olde Towne Pavers. For repairs, we stock genuine Tremron pavers and matching edge restraints locally, so color and texture blend with what is already in your yard. We do not push aftermarket pavers on a repair and pretend it matches. For structural base failures, we reuse every intact Tremron paver we can and rebuild with proper Class II road base to Irvine geotechnical standards. When the original Tremron line is discontinued or the base has failed beyond recompaction, we tell you straight and recommend full replacement rather than a patch that will fail again.
Tremron Service Pricing in Irvine
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 - $11,000 |
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
Every estimate is free and in writing. We do not change the number without a signed change order. Call (877) 610-1318 and we will walk your yard, check the base, and give you a line-item quote you can hold us to.
Serving Irvine, CA - Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Tremron Construction in Irvine
Will my Irvine HOA let me replace my existing concrete driveway with Tremron pavers?
In most Irvine villages, yes, but only if the paver type, color, and laying pattern match the hardscape standards for your specific tract. University Park and Woodbridge ARCs are strict about this. We handle the ARC submittal for you, including samples and pattern drawings, so the approval comes back without revision rounds. Call (877) 610-1318 and we will check what your village requires before you spend a dime.
Why do Tremron paver patios shift so much in Turtle Rock compared to flat areas of Irvine?
Turtle Rock sits on expansive clay that swells when wet and shrinks when dry. Sand-set pavers ride that movement, lifting at edges and separating at joints. Flat-lot villages like Westpark do not see the same seasonal shift. The fix is a properly compacted Class II base with geogrid at the clay boundary, which is exactly how we build every hillside paver job in Irvine.
Can you match Tremron pavers installed 20 years ago in my Woodbridge patio?
Yes, in most cases. We stock current Tremron lines that read as a close match to the original Cobble and Holland Stone pavers used in 1980s and 1990s Woodbridge tracts. If the original line is discontinued, we will show you samples side by side with your existing patio and tell you honestly whether a match or a full redo makes more sense. Call (877) 610-1318 and we will bring samples to your house.
Is a Tremron paver driveway strong enough for my RV in Portola Springs?
Yes, if the base is built for it. Standard paver driveways handle passenger vehicles, but an RV or heavy truck needs a thicker sub-base and edge restraints sized for point loads. We install Tremron driveways in Portola Springs with an engineered base spec, so you are not repaving in three years. We will tell you the real cost upfront.
How do Santa Ana winds affect a new Tremron paver installation in Irvine?
Santa Anas kick up fine grit that abrades the color-enhanced finish on tumbled Tremron pavers, especially in exposed Great Park and Portola Springs yards. We recommend a quality sealer applied after curing, and we schedule resealing on a cycle that accounts for your wind exposure. A new install done right holds its look much longer, even in the windiest Irvine villages.
Service Areas Near Irvine
We serve all of Irvine and the surrounding area, including Los Angeles, San Diego, San Jose, San Francisco, Fresno, and Paramount. If you are outside Irvine proper but still in the broader region, we cover Irvine service area work daily. We also offer Tremron service in Chula Vista and Tremron service in Fremont for customers with properties in those cities.
Book Your Tremron Service in Irvine Today
If your Tremron patio, driveway, or retaining wall needs work in Irvine, call Tom and his crew at (877) 610-1318. We will answer the phone, schedule a free estimate, and show up when we say we will. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Irvine since 1998.







Before
After
Before
After
Before
After