Tremron Kitchen Remodeling Nationwide | Barrett & Sons Construction

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Tremron Kitchen Remodeling: The Los Angeles Owner’s Guide

Tremron kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 installed, and most full kitchen jobs take three to six weeks from tear-out to final inspection. We’re the local crew that handles Tremron work the right way, with a written scope, a written change order for every adjustment, and a 90-Day Done Right Promise on the finished job. Most Los Angeles homeowners call us after a cabinet door hinge has stripped, a drawer slide has snapped, or a countertop edge has chipped and they want it matched, priced honestly, and installed without a song and dance.

Call (877) 610-1318

Barrett & Sons Construction is an independent Los Angeles remodeler. We’re not affiliated with Tremron, but we work with their product lines often enough to know what fits, what doesn’t, and what’s worth fixing versus replacing. If you’ve got a failed part or a failing kitchen, here’s everything you need to know before you spend a dime.

Which Tremron Models This Applies To

Tremron doesn’t operate like KraftMaid or Cambria, where every cabinet line has a named series you can look up in a catalog. Tremron’s kitchen footprint in Los Angeles tends to run through their paver and hardscape manufacturing side, which means a lot of the “Tremron kitchen” work we see is outdoor kitchens, built-in grill islands, and paver countertops, not a wall of shaker cabinets. That matters for parts matching. The measurements you need off the failed piece are the same ones we’d take on-site: width, depth, and the mounting pattern, because Tremron’s block and paver dimensions are the compatibility spec that everything else hangs on.

When a Tremron paver countertop or island face fails, the fix is usually a matched replacement unit, and that’s where aftermarket versus OEM gets real. Tremron’s OEM pavers carry a specific color batch code stamped on the underside of the paver, and the codes change between production runs. A paver from a different batch will be close but not identical, and in Los Angeles sun that quarter-shade difference shows up in about two years. We’ll always start with the stamp match, and if the batch is out of production, we tell you plainly and offer the closest current equivalent before we order anything.

Signs Your Tremron Kitchen Remodeling Is Failing

  • Hairline cracking across the paver countertop surface. This is usually thermal expansion working against a too-rigid mortar bed. Los Angeles swings from 45°F winter mornings to 110°F summer afternoons on the same surface, and pavers that aren’t set with a flexible bond crack at the grout lines first.
  • Grout turning chalky and dropping out in chunks. Water intrusion is the culprit. Once moisture gets behind the paver face and the freeze-thaw cycle in Los Angeles foothill areas starts working, the grout gives up before the paver does.
  • A cabinet drawer or door that’s suddenly binding, sticking, or won’t close flush. This is frame movement, usually from humidity swings or a settling foundation slab. The part itself may be fine, but the cabinet box has shifted, and no amount of hinge adjustment fixes geometry that’s moved.
  • Soft spots or visible rot at the base of any outdoor kitchen island. Los Angeles isn’t Seattle, but sprinkler overspray and drainage issues against a paver island base will rot the framing underneath in a few seasons. By the time you can push a screwdriver into it, the framing needs replacement, not patching.
  • Countertop edge chipping along high-traffic corners. Pavers are tough, but a dropped cast-iron skillet on an outside corner will spall the edge. Small chips are repairable; edge-wide crumbling means the paver itself has reached its useful life.

Replacement Cost & What’s Included

In Los Angeles, a full Tremron-compatible kitchen remodel runs $16,520 to $53,100, and the spread depends on scope. A small outdoor kitchen refresh with paver countertop replacement and new cabinet doors might sit at the lower end around $10,620 to $23,600. A complete indoor kitchen with new cabinetry, countertops, backsplash, and island lands in the $16,520 to $53,100 window. Here’s the line-item reality so you can plan:

  • Kitchen Remodel (full): $16,520-$53,100
  • Small Kitchen Remodel: $10,620-$23,600
  • Cabinet Installation: $4,720-$15,340
  • Countertop Installation: $2,360-$7,670
  • Backsplash Installation: $945-$2,950
  • Kitchen Island Installation: $3,540-$11,800

Every price we quote includes parts, labor, and the written change order process if anything shifts mid-job. We don’t do surprise invoices at the end, because Tom Barrett’s rule is simple: an allowance that isn’t on paper is a surprise waiting for a date. The 90-Day Done Right Promise covers the workmanship, and it’s written on the contract, not buried in fine print.

DIY or Call Us?

You can safely check the obvious things yourself: read the batch stamp on the underside of a failed paver, measure the mounting pattern on a stripped hinge, and look for water staining or sprinkler overspray against the island base. Those notes help us hit the ground running when you call.

What you shouldn’t do is tear into the structural framing of an outdoor kitchen island or start prying pavers off a mortar bed without knowing what’s underneath. Los Angeles building codes apply to any structural work, and a permit inspector who finds unpermitted framing work is a problem you’ll own, not us. If the job touches gas lines for a built-in grill, that’s a licensed-trade requirement. The smart move is to call us at (877) 610-1318, tell us what you’re seeing, and let us come look before anything gets worse.

FAQs

Need Construction help nationwide? Licensed & insured · Free written quotes response · free estimates
Call (877) 610-1318
Areas We Serve

Request a Free Estimate

Tell us what you need - Barrett & Sons Construction responds fast. No obligation.

By requesting your free estimate, you accept our Privacy Policy and consent to receive communications through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch