Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterKraftMaid Construction in San Francisco, CA | Barrett & Sons Construction
We provide independent KraftMaid cabinet installation, refacing, and repair service across San Francisco, from the Sunset to the Mission, for any Kitchen Remodeling in San Francisco project. What makes our KraftMaid work different here is that we understand exactly how marine-layer moisture, post-1989 floor settling, and soft-story retrofit mandates affect aging cabinet runs in this city’s Victorian and Edwardian housing stock. A generic KraftMaid installer won’t check floor leveling before hanging your uppers; we won’t touch the job without it. Call (877) 610-1318 for a free estimate from a crew that knows KraftMaid and knows San Francisco.
Why San Francisco Residents Choose Us for KraftMaid Service
Our crews have pulled, measured, and replaced more than a thousand KraftMaid cabinet runs across San Francisco’s pre-1941 Victorians and 1960s-80s multi-unit remodels. That depth matters when a Vantage door front is separating from fog-driven humidity in an Outer Sunset kitchen, or when 1980s full-overlay hinges are sagging in a Mission flat that shifted during Loma Prieta. Tom Barrett founded this company in 1998, and his sons run the crews. We’re not a franchise dispatching strangers; Tom’s name, address, and license number are published and verifiable. When you book KraftMaid work with us, the person who shakes your hand is the person accountable for the job. We’re an independent KraftMaid contractor, which means we can tell you the truth about what’s worth replacing and what’s worth saving. Ask anyone on your street, or look up the license number yourself.
Common KraftMaid Construction Problems We Solve in San Francisco
- Melamine edge separation on Vantage and Momentum doors. Prolonged fog-driven humidity, especially in unventilated kitchens on the west side of San Francisco, works its way into the particleboard core and lifts the melamine edge banding. We replace the delaminated doors with custom-matched fabrication rather than patching failing laminate that will peel again in two seasons.
- Sagging hinges on 1980s-90s full-overlay doors. Older KraftMaid runs often had soft-close retrofits added without reinforcing the particleboard core, and a decade of San Francisco settling finishes the job. We reinforce the cabinet box, then install new Blum soft-close hinges sized to the actual door weight.
- Bowed adjustable shelves in pantry cabinets. KraftMaid pantry cabinets with 36-inch clear spans bow under years of overloaded storage, and it’s worse in rent-controlled units where tenants pack shelves to the ceiling. We fabricate reinforced replacements and, where needed, add a center stile so the next shelf doesn’t do the same thing.
- Thermofoil finish crazing on south-facing doors. Direct sun through single-pane Edwardian windows heats KraftMaid thermofoil doors enough to crack the finish layer. We reface with a painted or wood-veneer panel that holds up to San Francisco’s best weather: the rare hot autumn afternoon.
- Cabinet runs out of level after seismic settling. Post-Loma Prieta floor sag in Mission and SoMa flats pulls upper cabinet runs out of square, so doors rub and drawers bind. We level the run, block and shim the framing, and rehang the doors so they close like the day they were installed.
KraftMaid Service in San Francisco: What Local Conditions Mean for Your Equipment
In San Francisco’s Mission and SoMa flats, KraftMaid cabinets originally installed in the 1980s and 1990s often sit atop retrofit-grade floor framing that sagged after the 1989 Loma Prieta earthquake. Any cabinet replacement in those buildings triggers a mandatory floor-leveling check that Oakland remodels rarely face, because San Francisco’s soft-story retrofit ordinance forces the issue. Here’s what that means for your KraftMaid run: if you’re swapping lower cabinets on Guerrero Street or Shotwell, your contractor has to assess the floor diaphragm before the first cabinet gets hung, or the new boxes will inherit every millimeter of the old sag. A guy working cabinet jobs in Fremont or Daly City won’t think about that. We do, because we’ve corrected enough post-1989 KraftMaid installations in this city to know the framing underneath is usually the real problem. The permit inspector works for you, not for me. That’s why I like him.
KraftMaid Models & Products We Service in San Francisco
We work on the full KraftMaid line: Vantage, Momentum, Carrara, and the Lexington Square door style, across every era of manufacture. When your cabinet boxes are still sound, we source genuine KraftMaid hinges, drawer glides, and trim kits so everything matches. When a run is past saving, we’re quick to recommend aftermarket Blum soft-close hardware and locally fabricated replacement doors instead of patching failing laminates that won’t last through another San Francisco fog season. We keep common KraftMaid hinge plates, drawer slides, and leveling feet in the truck, which means most San Francisco service calls don’t wait on parts. Our cabinet work covers installation, refacing, and small or partial kitchen remodels from the Outer Richmond to Bayview. See our full KraftMaid sales & service page for what we carry and what we don’t.
KraftMaid Service Pricing in San Francisco
What you’ll pay for KraftMaid work in San Francisco depends on the condition of the existing boxes, the age of the run, and what the floor and wall framing are doing underneath. Here are our current line-item ranges:
| Service | Typical Range in San Francisco |
|---|---|
| Cabinet Installation | $4,720 - $15,340 |
| Cabinet Refacing | $3,540 - $9,440 |
| Small Kitchen Remodel | $10,620 - $23,600 |
Every estimate is free, comes in writing, and includes a floor-leveling and framing assessment on any pre-1989 building. Where the scope changes, the price change arrives as a written change order before work begins. Call (877) 610-1318 to schedule a free estimate and get exact numbers for your Bathroom Remodeling in San Francisco or kitchen.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - KraftMaid Construction in San Francisco
Your cabinet boxes will survive the retrofit if they’re properly detached, stored, and reinstalled after the structural work is complete. The retrofit itself involves jacking and leveling the ground floor, which changes the geometry of the floors above. We’ve reinstalled KraftMaid runs after soft-story work in the Mission and SoMa, and the key is blocking and leveling the wall framing before rehanging anything. If your contractor skips that step, your doors will never close right again. Call (877) 610-1318 and we’ll walk you through what your specific building’s retrofit means for the kitchen.
Yes, if the cabinet box itself is sound. A sagging 36-inch shelf in a KraftMaid pantry cabinet usually means the particleboard core has lost its stiffness, not that the whole cabinet is failing. We fabricate a reinforced replacement shelf and, where the span is too long for the material, add a center stile so the load path changes. You don’t need a full kitchen remodel to fix a shelf that’s bowing under rent-controlled-unit weight.
Because the wall framing shifted and the repair work likely didn’t include re-leveling the cabinet run. The 1989 Loma Prieta earthquake moved floor and wall framing in thousands of San Francisco buildings, and when upper cabinets were reinstalled on unleveled framing, the doors bind. We level the run, block and shim the studs, and rehang the doors with hinges sized to the actual door weight. It’s a framing problem disguised as a cabinet problem.
Older KraftMaid hinge plates can accept many modern Blum soft-close upgrades, but the limiting factor is the particleboard core behind the hinge. In humid San Francisco kitchens, that core has often softened over decades of fog exposure, so a soft-close retrofit without reinforcing the core will just pull the hinge out of the door. We reinforce first, then upgrade. Call (877) 610-1318 and we’ll inspect your hinges before recommending any hardware.
It’s usually both, but the accelerator is San Francisco’s persistent moisture. Cooking heat plus daily fog condensation cycles delaminate thermofoil doors faster in this city than in a dry inland climate. The fix is a refaced painted or wood-veneer panel that won’t delaminate, and we fabricate those locally so the color matches your existing run. Call (877) 610-1318 for an exact quote; estimates are free.
Service Areas Near San Francisco
Our service area covers all of San Francisco, including the San Francisco service area ZIP codes 94122, 94123, 94124, and 94125, plus surrounding communities. We also take KraftMaid work in the broader Bay Area and Central Valley. You can read about our KraftMaid service in Fresno or our KraftMaid service in Sacramento if you own property outside the city.
Book Your KraftMaid Service in San Francisco Today
Call (877) 610-1318 to schedule your free KraftMaid estimate in San Francisco. We’ll come out, look at your cabinets, check the floors and framing underneath, and hand you a written line-item quote. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving San Francisco since 1998.