KraftMaid Bathroom Remodeling Nationwide | Barrett & Sons Construction

KraftMaid Bathroom Remodeling: The Los Angeles Owner’s Guide

We install and replace KraftMaid bathroom cabinetry, vanities, and hardware throughout Los Angeles, with full bathroom remodels typically running $10,620-$33,040 and cabinet-focused work starting lower. Most owners call us after a hinge strips out of a KraftMaid vanity door or a cabinet box starts pulling away from the wall after years of shower humidity. If you’re holding a failed part or a wobbling vanity, here’s the full picture: what fails, what it costs, and whether you should open the toolbox or pick up the phone.

Call (877) 610-1318

Key Takeaways:

• KraftMaid bathroom vanities in Los Angeles homes fail most often from humidity swelling, hinge fatigue, or installer errors like missing wall anchors.
• We carry KraftMaid-compatible hinges, drawer glides, and touch-up kits on our trucks; full cabinet boxes we order direct so you get the exact door style and finish.
• Most Los Angeles bathroom vanity replacements run $945-$3,540 installed; full KraftMaid bathroom remodels range $10,620-$33,040.
• Written change orders before any scope change, permits pulled on every eligible job, and the 90-Day Done Right Promise on all our work.

Which KraftMaid Models This Applies To

KraftMaid builds bathroom cabinetry across a few core lines, and the part you need depends on which one is sitting in your Los Angeles home. The KraftMaid Vantage line is the most common we see in LA bathrooms, especially in homes built or remodeled after 2010. The older Passport series shows up in homes from the late 90s and early 2000s. Both use KraftMaid’s standard 110-degree soft-close hinges on most door styles, but the drawer glides are not always interchangeable between series. A Vantage drawer glide will not always slot into a Passport cabinet box without modification. That’s one of the compatibility gotchas we check before ordering anything.

Inside the cabinet door or drawer front, you’ll usually find a small white or silver sticker with the KraftMaid name and a series code. The finish name, door style name, and a manufacturing date are on that label. If the sticker is gone, measure the cabinet opening width and the door overlay. KraftMaid makes doors in standard widths of 12, 15, 18, 21, and 24 inches, but the overlay matters more than anything. A half-inch overlay door will not cover a full-overlay cabinet box. When a Los Angeles homeowner orders a replacement door based on width alone and it shows up with the wrong overlay, the seams look wrong and the doors bind. We measure before we order, every time.

On OEM versus aftermarket: KraftMaid OEM hinges and glides are engineered to the exact cabinet geometry, and they’re worth the modest premium on visible hardware. For internal parts like shelf pins or drawer stops, a quality aftermarket equivalent from a brand like Blum works fine and often comes with a longer warranty. Blum is also what KraftMaid specifies in many current production lines, so the aftermarket choice is sometimes the identical part in different packaging. We stock KraftMaid-compatible hinges, glides, and bumpers on our trucks, and we also carry parts for the other lines we install around Los Angeles: Cambria, Silestone, and Kohler.

Barrett & Sons Construction is an independent contractor. We are not affiliated with KraftMaid, and we don’t pretend to be. What we are is a company that has repaired and replaced KraftMaid cabinetry across Los Angeles for over 25 years, and we know which parts match which boxes without guessing.

Signs Your KraftMaid Bathroom Remodeling Is Failing

• Door won’t stay closed or pops back open. The soft-close hinge has worn out at the damper, which is a sealed unit you can’t lubricate back to life. If one hinge failed, the mate is usually weeks behind it, and the door starts hanging at a slight angle.
• Drawer sags or scrapes when you pull it. The drawer glide roller bearings are flat-spotted, or the glide mounting screws have stripped out of the particleboard cabinet side. Los Angeles humidity swings make the particleboard swell and shrink, which slowly loosens those screws.
• Vanity pulls away from the wall at the top. This is almost always a missing or undersized wall anchor from the original install. The vanities can weigh 150 pounds empty, and with a stone top they’re over 300. Gravity never stops.
• Cabinet box bottom is soft or bubbled under the sink. A slow P-trap leak or years of splash moisture has saturated the cabinet base. For KraftMaid, the box bottoms are usually replaceable separately from the full cabinet, but only if caught before the sides wick the moisture upward.
• Finish peeling or clouding near the shower or tub. Steam and cleaning product overspray break down the conversion varnish over time. This can sometimes be refinished, but on lighter KraftMaid finishes it often comes back, and replacing the affected doors is the real fix.

Replacement Cost & What’s Included

In Los Angeles, a single KraftMaid vanity door replacement runs $945 to $3,540 installed depending on whether we’re swapping doors on an existing box or replacing the entire vanity and top. A full bathroom remodel with KraftMaid cabinetry, a new top, hardware, and installation runs $10,620 to $33,040. What drives the spread is mostly the countertop material (a prefab quartz top runs less than a fabricated stone slab), the number of cabinets, and whether the plumbing rough-in needs to move.

Every quote you get from us is a written, line-item price. The parts are listed separately from the labor, and the labor number is the labor number. If anything changes on the job, you get a written change order before a single nail moves, and it’s signed by both of us. That’s how we’ve done it since 1998, and it’s the main reason Los Angeles homeowners who have been burned by national outfits end up calling us for the second opinion. We also offer a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.

We don’t just install parts. We stand behind the whole job with the 90-Day Done Right Promise, written on every contract. Something is off in the first three months, Tom Barrett comes back and makes it right, one call.

DIY or Call Us?

The honest split: you can safely tighten loose hinge screws, adjust a drawer glide, or replace a broken shelf pin without calling us. If the screws are stripped, you can try a slightly larger screw, but if the holes are wallowed out in particleboard, drilling more holes in a failing box usually makes it worse. What you should not do yourself is uninstall or reinstall a full vanity, move plumbing, or try to hang a mirrored cabinet on drywall anchors alone. A fully loaded vanity with a stone top can weigh over 300 pounds, and if it comes off the wall it can cause serious injury. That is a job for people who do it every week.

If you’re in Los Angeles and you want us to look at it, call (877) 610-1318. We’ll match the part, quote the fix in writing, and if you want us to handle the install, we’ll do it right the first time, or we’ll come back and make it right.

How Long Does a KraftMaid Vanity Last in Los Angeles?

KraftMaid cabinet boxes and doors typically last 15 to 25 years in a Los Angeles bathroom, but hinges and drawer glides usually wear out in 7 to 12 years with daily use. The lifespan swings on two things: how much humidity the bathroom holds and whether the original install used proper anchors. A well-ventilated bathroom with a working exhaust fan adds years to any cabinet line.

Can a Damaged KraftMaid Cabinet Be Repaired Instead of Replaced?

Yes, in many cases a damaged KraftMaid cabinet can be repaired instead of replaced, and it usually costs less than half of a full box replacement. A stripped hinge hole, a sagging drawer glide, or a water-damaged cabinet bottom can all be fixed without pulling the whole vanity. If the damage extends into the cabinet sides or the finish is failing across multiple doors, replacement is the better long-term call.

How Long Does a KraftMaid Vanity or Cabinet Swap Take?

A simple vanity door and hardware swap takes about 2 to 4 hours, while a full vanity replacement with plumbing and a new top usually takes one full day. Larger KraftMaid bathroom remodels with multiple cabinets, new tops, and a new shower typically run 2 to 4 weeks depending on whether we need to order a specific door style or finish from KraftMaid’s current production schedule.

Do You Stock KraftMaid Parts on the Truck?

We stock common KraftMaid-compatible hinges, drawer glides, bumpers, shelf pins, and touch-up kits on our trucks, so smaller repairs often happen on the first visit. For full cabinet boxes, doors, or drawer fronts, we order direct to match your exact series, finish, and overlay, and most parts arrive within 1 to 2 weeks in Los Angeles. Call (877) 610-1318 and we’ll confirm what we have and what we need to order before anyone sets foot in your house.

Call Barrett & Sons for KraftMaid Bathroom Remodeling in Los Angeles

If you’ve got a failing KraftMaid part in a Los Angeles bathroom, you don’t need to guess at the fix. Call (877) 610-1318 and a live person answers, day or night. We’ll walk through what you’re seeing, tell you whether it’s a repair or a replace, and give you a price in writing. No trip charge inside the county, $40 off any repair over $200, and the same name on the truck as on the contract. Tom Barrett has been serving Los Angeles since 1998, and if something isn’t right, he’s twenty minutes away and he wants to know about it.

Written by Tom Barrett, Owner, Barrett & Sons Construction at Barrett & Sons Construction, serving Los Angeles and nearby areas.