Kohler Kitchen Remodeling Nationwide | Barrett & Sons Construction

Kohler Kitchen Remodeling: The Los Angeles Owner’s Guide

Kohler kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 installed, depending on the size of the kitchen and which Kohler fixtures and components you’re keeping, replacing, or upgrading. We stock common Kohler faucet cartridges, spray heads, soap dispensers, and sink hardware on our trucks so a single failed part doesn’t force a full remodel. Most owners call us after a Kohler pull-down spray head stops retracting, a faucet drips from the base, or a soap dispenser seizes mid-pump right before a holiday dinner – and the sink or fixture is fine, but that one part has quietly worn out.

Call (877) 610-1318

Key Takeaways:

• Kohler kitchen remodels in Los Angeles run $16,520-$53,100 fully installed
• We match OEM Kohler parts before recommending any aftermarket equivalent
• Barrett & Sons is an independent Los Angeles contractor, not affiliated with Kohler
• Every price change comes as a written change order before work starts

Which Kohler Models This Applies To

We work on Kohler kitchen faucets, sinks, and fixtures across most current and recent series lines: the Simplice, Sous, Bellera, Cruette, Artifex, and the older Forté and Coralais lines that are still in thousands of Los Angeles homes. The trick with Kohler is that the same model line can have two or three cartridge revisions depending on the production year, and the cartridge for a 2012 Simplice won’t always seat correctly in a 2022 Simplice body. That’s a compatibility gotcha we run into regularly in older Los Angeles homes where a fixture was replaced a decade apart from the rest of the kitchen.

Before you order any Kohler part online, look under the sink or on the faucet’s base for the model number stamp. Most Kohler kitchen faucets have it engraved on the underside of the spout or on a tag under the handle. If the stamp is worn off, we can ID the part by photographing the spray head and handle shape back at the shop. On the OEM-versus-aftermarket question: for Kohler valves and cartridges, we use OEM parts from our Los Angeles supply house 90 percent of the time. The plastic aftermarket cartridges are cheap, but they wear out twice as fast and can strip the brass threads on a real Kohler body, which turns a $40 cartridge into a $500 faucet replacement. If you’re replacing trim, mixing in a quality aftermarket collar or handle is usually fine. For the parts that touch water pressure, we stay OEM.

Signs Your Kohler Kitchen Remodeling Is Failing

• Faucet drips from the base of the handle, not the spout. That’s the cartridge’s O-rings drying out, common in Los Angeles because our hard water leaves mineral deposits that act like sandpaper on rubber seals. A new Kokler OEM cartridge usually ends it.
• Pull-down spray head won’t retract or sags. The weight that sits on the hose under the sink has slipped, or the hose’s plastic retainer clip snapped. Cheap fix, but if it keeps happening, the hose itself has stiffened from heat and hard water and needs replacing.
• Spray head leaks where the hose threads on. That’s the small check valve or the threaded collar wearing out. It’s a $15 Kohler part, but if ignored, it drips into the cabinet below and warps the sink base over time.
• Handle feels gritty or stiff through its arc. That’s mineral buildup inside the cartridge body. In Los Angeles County, where water hardness runs high, this shows up within 3 to 5 years on cheap cartridges and closer to 8 on OEM Kohler ones.
• Soap dispenser won’t pump or leaks down the side of the sink. The bottle-to-pump seal is cracked or the pump’s check ball is stuck. Common on older Kohler dispenser models, and it’s a five-minute swap if you match the right pump thread size.

Replacement Cost & What’s Included

Here’s how pricing looks for the Kohler-specific work we do in Los Angeles. A full kitchen remodel with Kohler fixtures, countertop work, and cabinetry sits between $16,520 and $53,100. If you’re just replacing a Kohler faucet cartridge and spray head, you’re looking at a fraction of that, usually $150 to $400 parts-and-labor, depending on whether it’s a Simplice, Sous, or the older Forté line. The big price drivers on a full remodel are cabinet quality, countertop choice, and whether we’re moving plumbing or electrical.

Every Kohler remodel or part replacement we do in Los Angeles comes with the 90-Day Done Right Promise written on the contract. If the faucet starts dripping again or the sink rim fails, one call brings Tom Barrett back to make it right. We also pull permits on every eligible remodel job and hand you a written line-item quote before the first part gets ordered, so the number you see is the number you pay.

DIY or Call Us?

A homeowner can safely check a few things before calling: is the weight on the spray hose still attached, is the shut-off valve under the sink fully open, and is the aerator clogged with mineral deposits. Those are five-minute visual checks and we won’t charge you for walking you through them over the phone. But Kohler cartridge replacement is where DIY goes wrong fast. The retaining clip is small and spring-loaded, and removing it without the right pick can send it across the kitchen and strip the brass housing in the process. That turns a $40 part into a $500 faucet. If the faucet is older than ten years, Los Angeles hard water has likely fused the cartridge in place, and pulling it without penetrating oil and the right puller can crack the body. We’re not trying to scare you away from fixing your own home, but plumbing parts under pressure are one area where a wrong turn costs more than our service call. If you’re not sure which Kohler part you need, call (877) 610-1318 and describe the symptom. We’ll tell you honestly whether it’s a DIY job or a truck roll.

FAQs