Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterJerith Construction in Los Angeles, CA | Barrett & Sons Construction
We provide independent Jerith fence installation and repair across Los Angeles, from Hollywood Hills hillside lots to San Fernando Valley ranch homes. The one thing that makes our Jerith work here different: we build every fence to survive the city’s seismic movement, Santa Ana wind cycles, and fire-zone inspection requirements. Call (877) 610-1318 for a free estimate from a crew that knows Jerith hardware inside out. See our Jerith sales & service page for the full line.
Why Los Angeles Residents Choose Us for Jerith Service
Tom Barrett grew up in the San Fernando Valley, not far from the old stretch of Van Nuys Boulevard where his dad used to take him to watch crews pour foundations on weekends. He learned framing at Los Angeles Trade-Technical College and spent enough hours in the field to know the job never lies. That background matters when you’re mounting Jerith aluminum posts into hillside grade that shifts every wet winter.
We’re not a franchise dispatching strangers. Our crews are Tom’s sons and their teams, guys who’ve reset Jerith panels on Mount Washington slopes and replaced salt-corroded gate hinges in Pacific Palisades. We stock genuine Jerith pickets, posts, and gate kits for fast Los Angeles turnaround, and when a Jerith profile is discontinued we source US-made extruded aluminum that matches wall thickness and powder-coat spec. No thin box-store patches. Since 1998, Barrett & Sons has backed every Jerith install with our 90-Day Done Right Promise, written on the contract, not buried in fine print.
Common Jerith Construction Problems We Solve in Los Angeles
Jerith fences are solid aluminum, but Los Angeles throws conditions at them that most cities never see. Here’s what we fix most often:
- Post loosing and gate sag from seismic micro-movement. Hillside lots across Los Angeles, especially in Mount Washington and the Hollywood Hills, experience small ground shifts that crack concrete footings along angled grade. Jerith posts set in shallow footings start to lean, and self-closing pool gates stop latching square. We drill deeper footings and re-set posts to hold under racking.
- Powder-coat chalking and pinhole corrosion near the coast. Salt air and prolonged UV in Pacific Palisades, Playa del Rey, and other coastal-adjacent Los Angeles zones eat at Jerith’s finish faster than inland. We strip and re-coat affected sections or replace pickets with matching OEM material when the coating’s gone past surface chalk.
- Flange and bracket failures where Jerith panels were surface-mounted. A lot of Los Angeles properties have Jerith panels bolted to existing stucco or wood retaining walls. After heavy rain, those walls flex, and the flanges crack. We re-mount with proper standoffs and anchors that allow for drainage and movement.
- Latch misalignment on pool fence gates. Santa Ana wind cycles warp gate hinge alignment over time, and hillside settlement makes it worse. A Jerith pool gate that doesn’t self-latch is a code violation waiting for an inspector to flag. We replace hinge plates with Jerith OEM hardware and realign the gate.
- Termite-adjacent wood post replacement in the Valley. Wood fence posts near Jerith aluminum runs rot from termites and irrigation overspray. We’ll pull the wood, install Jerith-compatible post systems, and leave you with a run that termites won’t touch.
We’ll do it right the first time, or we’ll come back and make it right.
Jerith Service in Los Angeles: What Local Conditions Mean for Your Equipment
Here’s the information-gain fact most Jerith owners in Los Angeles never hear until inspection day: because Los Angeles requires WUI-compliant Class A roofing and ember-resistant vents in Very High Fire Hazard Severity Zones like Bel Air and Tarzana, a Jerith fence installed without coordinating eave-to-fence setbacks and noncombustible under-fence zones can cause a roof replacement or hillside remodel to fail final inspection. We’ve seen it happen. A homeowner in Tarzana calls us after their roofer finished a Class A replacement, and the inspector walks the property and flags the fence line too close to the eave with combustible mulch underneath. Now the homeowner’s stuck fixing a fence issue they didn’t know existed-sometimes after already paying for Los Angeles Kitchen Remodeling or other work that should have cleared inspection. Contractors in neighboring Orange County rarely deal with this. We do. When we install Jerith in a VHFHSZ, we map the eave line, check the under-fence zone, and make sure the final assembly will pass a Los Angeles fire inspection, not just a fence inspection. That’s the difference between a fence that looks good and a fence that keeps your whole project moving.
Jerith Models & Products We Service in Los Angeles
Our crews install and repair the full Jerith residential and light-commercial line. That includes Jerith Premiere Ornamental Aluminum Fence, the Estate line with heavier residential picket profiles, Industrial Aluminum Fence for commercial and security enclosures, and pool code-compliant sections with self-latching gate assemblies. We carry genuine Jerith pickets, posts, and gate kits in our Los Angeles inventory for fast turnaround. When a profile’s under 15 years old and matching spacing matters, we’ll always reach for OEM parts. For older or discontinued Jerith sections, we source US-made extruded aluminum that matches the original wall thickness and powder-coat spec. If more than 40% of a run shows post movement or coating failure, we’ll usually recommend a new Jerith run over chasing piecemeal repairs on fatigued metal. We tell you straight which way to go, just as we would on any Los Angeles Bathroom Remodeling project.
Jerith Service Pricing in Los Angeles
Jerith fence work in Los Angeles runs on a few factors: linear footage, post footing depth, hillside grade, and whether we’re matching existing OEM profiles or sourcing aftermarket extrusions. For frame of reference, most Jerith aluminum fence installations across Los Angeles fall between $4,130 and $10,620 for vinyl-backer or standard residential runs, while heavier aluminum systems can run $4,720 to $11,800 depending on height and picket profile. Pool code-compliant sections with self-latching gates add a bit for the hardware and extra footings. A free estimate from Barrett & Sons includes a written line-item quote, not a phone number and a guess. Call (877) 610-1318 and we’ll come measure on-site, no trip charge inside the county.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Los Angeles
Usually yes, as long as the fence posts don’t constitute retaining walls and you’re not cutting into grade deeper than standard post hole depth. Los Angeles’ Hillside Ordinance kicks in when grading exceeds certain thresholds or when a fence functions as a retaining structure. For typical Jerith post-mounted fence runs, we keep footings below the 30-inch depth and avoid benching into slope, which keeps the job out of grading review in most cases. Call (877) 610-1318 and we’ll tell you what your specific hillside lot will require after we walk it.
Yes, in a specific way. The retrofit ordinance targets pre-1978 soft-story buildings with tuck-under parking, the Tier 1 candidates all over the Eastside and Valley. If your Jerith fence mounts to the building or to adjacent walkways, the retrofit work may require the fence to be temporarily removed or re-anchored so the structural work can proceed without compromising the fence. We coordinate Jerith panel removal and re-install around seismic retrofit crews, so the fence doesn’t get cut and patched by a structural team that doesn’t care about matching picket profiles.
Jerith’s pool code-compliant sections meet the self-latching and height requirements as manufactured, but Los Angeles County inspectors often flag two local issues: gate hinge alignment after hillside settlement and the gap between grade and bottom rail on sloped lots. We pre-adjust gate hinge plates and set posts to account for slope, so the latch stays square and the bottom gap never opens beyond code. Call (877) 610-1318 for a pool fence check before your next inspection.
Salt air and UV attack Jerith’s powder coat faster than inland sun. We strip the affected sections, treat any pinhole corrosion, and re-coat or replace pickets with matching OEM material. For fences that are already heavily chalked, we’ll give you an honest cost to re-coat versus replace. Call (877) 610-1318 for a coastal fence assessment.
Not always. WUI code applies to new construction and significant remodels, and a roof replacement can trigger inspection of the exterior assembly. The fence itself may not need replacement, but setbacks from eaves, under-fence vegetation clearance, and noncombustible zones may need adjustment. We survey the fence line before your roof inspection and fix what the inspector will flag. Call (877) 610-1318 and we’ll walk the property with you.
Service Areas Near Los Angeles
We serve Los Angeles neighborhoods from Tarzana to Mount Washington, plus surrounding communities. If you need Jerith service in the Bay Area, see our Jerith service in San Jose page. For coastal Southern California work farther south, visit Jerith service in San Diego. Our Los Angeles service area page shows full coverage.
Book Your Jerith Service in Los Angeles Today
If your Jerith fence is leaning, sagging, or failing inspection, call (877) 610-1318. Tom and the crew will come measure, quote it in writing, and get the work scheduled. Same-day estimates are often available around Los Angeles. We’ll set the posts deep enough to hold, and we’ll stand behind the work.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Los Angeles since 1998.