Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterJerith Construction in Austin, CA | Barrett & Sons Construction
We install and service Jerith aluminum fencing across Austin, from the limestone shelf west of I-35 to the Blackland Prairie clay east of it. The short version: we’re an independent Jerith dealer, not a manufacturer affiliate, and the thing that separates our Jerith work here is that we set posts differently depending on which side of the Balcones Fault your lot sits on. Tom Barrett and his sons have been doing it that way for years, because a fence line that crosses the escarpment in Austin can hit rock at 14 inches on one end and three feet of gumbo clay on the other. Call (877) 610-1318 for a free estimate on Jerith installation, repair, or replacement anywhere in Austin.
Why Austin Residents Choose Us for Jerith Service
Jerith aluminum fencing is built in the USA and carries a finish warranty that outlasts most vinyl products, but only if the posts are set for the ground they’re going into. That’s the part the manufacturer can’t spec from a catalog. Tom Barrett grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough hours in the field to know the job never lies. When he moved his family’s company into Austin-area service, he brought that same habit with him: look at the soil, look at the slope, look at what the last contractor did wrong, then build accordingly. We’re owner-operated from 1998, we answer our own phone, and every Jerith job we take in Austin gets permits pulled and inspections signed where the city requires them. You’ll see our name on the truck, not a franchise logo.
We’re Jerith sales & service specialists, which means we stock genuine Jerith pickets, rails, and gate hardware locally and we don’t substitute mystery-brand parts to save a buck. If a Jerith fence in Austin is worth repairing, it’s worth repairing with the right aluminum.
Common Jerith Construction Problems We Solve in Austin
- Posts loosening in eastern clay soils after heavy rain. Austin’s Blackland Prairie clay, the “black gumbo” east of I-35, swells when it rains and shrinks when it dries. That movement works posts loose over a season or two, and fence lines start leaning or panels pop out of their rails. We fix it with deeper concrete collars and bell-bottom piers, not just more concrete around the same shallow hole.
- Gate sag on Defender series fences. The Jerith Defender line is tough, but when pier footings shift on limestone-pocked ground, even a recently set gate post can drift enough to make the gate drag or refuse to latch. We reset gate posts in 10-inch concrete collars with weep holes so water doesn’t pool and re-loosen them.
- Powder-coat chipping from hail and flash-flood debris. Austin gets hailstorms and street-level debris in hard rain events. When the powder coat chips at rail-to-picket connections, bare aluminum starts corroding white. We touch up with matched Jerith finish and replace sections that have gone too far.
- Racking stress on Contempo horizontal rail panels. The Contempo series is architectural and modern, but its horizontal rails don’t forgive installers who drive posts into inconsistent escarpment bedrock without pre-drilling. Torqued rails and popped screws show up within a year. We pre-drill with a rock auger when we hit limestone, and the panels sit straight.
- Mixed-soil fence lines crossing the escarpment. A single Jerith fence in Austin can cross from rock to clay within fifty feet. We’ve set fences where the west half needed rock augers and the east half needed bell-bottom piers, and we price both into the estimate up front so nothing changes mid-job.
Jerith Service in Austin: What Local Conditions Mean for Your Equipment
The Balcones Escarpment runs diagonally through Austin, and it doesn’t care about property lines. A Jerith fence that starts near MoPac can sit on dense limestone that needs a rock saw or auger, then cross into expansive clay near Airport Boulevard that swells several inches with every rain cycle. That means a single fence line often needs two different post-setting strategies, sometimes within the same afternoon. Our crew set a 200-foot Jerith Estate fence in Travis Heights last summer where half the post holes hit limestone at 14 inches while the other half went through 3 feet of shrink-swell clay. We pre-drilled the west half with a rock auger and used a 24-inch bell-bottom pier on the east half, then set every gate post in a 10-inch concrete collar with a weep hole. That fence hasn’t moved through two flash-flood events and a hundred-degree drought since. Out-of-town crews miss this split entirely, set everything at 24 inches, and wonder why the west side won’t stand.
Jerith Models & Products We Service in Austin
We install and repair the full Jerith residential lineup: the Defender series for standard residential aluminum fencing, the Estate series for ornamental looks, the Contempo series for architectural horizontal rail, and the Craftsman series for aluminum privacy-style with full pickets. When we repair, we default to genuine Jerith pickets, rails, and gate hardware so dimensions and finish match what’s already standing. Where Austin soil is the culprit, we recommend a premium aftermarket post mix and concrete collar, because the problem is the ground, not the metal. If a badly corroded section of a 15-plus-year-old Defender fence needs more than 30% new pickets and rails, we’ll price full replacement against patching and tell you which makes sense. No obligation either way. Our Austin service area covers the full city, and we keep common Jerith parts in stock for faster turnaround.
Jerith Service Pricing in Austin
Aluminum fence work in Austin runs on material cost, linear footage, and what the ground does when you dig into it. Here’s what we quote for the Jerith services on this page:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,130-$10,620 |
| Vinyl Fence Installation | $4,130-$10,620 |
| Driveway Replacement | $5,900-$16,520 |
Every estimate is free and written, and every price change comes as a written change order before work proceeds. That’s the Barrett & Sons way: scope in writing, allowances in writing, change orders in writing. The allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 and we’ll walk your fence line, check the soil, and give you a number you can take to the bank.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Austin
Most Austin neighborhoods require a fence permit, and the rules tighten if your fence line gets near a protected tree or runs along a drainage easement - the same attention to local codes we bring to Austin Bathroom Remodeling jobs. The Heritage Tree Ordinance can trigger a certified arborist survey before any ground disturbance within the critical root zone of a live oak or other native at 19 inches or larger circumference. We pull permits on every eligible job and the permit inspector works for you, not for us. Call (877) 610-1318 and we’ll tell you what your specific lot in Austin needs.
East Austin sits on Blackland Prairie clay that expands when wet and shrinks when dry. That cycle loosens shallow-set posts within a couple of seasons. West of I-35 you’re mostly on limestone, which holds posts but fights the auger. The fix on the east side is deeper piers and concrete collars that anchor below the active shrink-swell zone.
Yes. We stock genuine Jerith Defender pickets, rails, and gate hardware, and we match dimensions and finish so the new section ties into the old line cleanly. If your existing fence has faded or chipped coating, we’ll show you what a matched touch-up looks like before you commit to anything.
Set the gate post in a 10-inch concrete collar with a weep hole, and make sure the hinge side isn’t sharing a post hole with a fence line that’s fighting clay movement. We also check gate alignment after Austin’s first heavy rain each spring, since that’s when the gumbo soil does its worst shifting. Call (877) 610-1318 for a free gate inspection and straight answer on what yours needs.
We stop at the root zone and call in a certified arborist before we cut anything. Austin’s Heritage Tree Ordinance gives live oaks legal protection, and the city reviews any work inside the critical root zone. We’ve rerouted fence lines, adjusted post spacing, and hand-dug around roots to keep both the tree and the fence right. Estimates are free, and the arborist review is something we coordinate so you’re not stuck in permit limbo alone.
Service Areas Near Austin
We cover Austin proper plus the surrounding communities where Jerith fences get sun, hail, and clay just like yours. That includes the metro areas we serve from Jerith service in Fort Worth and Jerith service in El Paso, plus our wider Texas reach through Barrett & Sons Construction. If you’re on the edge of Austin and not sure whether you’re in our service map, call and ask. We’ll tell you straight.
Book Your Jerith Service in Austin Today
We’ll walk your fence line, check the soil on both sides of the escarpment if you’re near it, and give you a written estimate that won’t change on you. Call (877) 610-1318 to schedule your free Jerith service estimate in Austin. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Austin since 1998.