GAF Construction in Frisco, TX

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

GAF Construction in Frisco, CA | Barrett & Sons Construction

We provide independent GAF roofing sales and service across Frisco, from full Timberline re-roofs on early-2000s slab homes to targeted repairs after Collin County hail. The one thing that makes our GAF work here different: we know how Frisco’s Blackland Prairie clay moves under a roof deck, and we factor that into every fastener, seal strip, and flashing detail we install. Call (877) 610-1318 for a free estimate from a crew that’s been pulling permits in Frisco since before most of these subdivisions were finished.

Call (877) 610-1318

Why Frisco Residents Choose Us for GAF Service

GAF’s name is on a lot of Frisco roofs, because the production builders who put up most of this city’s housing stock in the 2000s and 2010s used Timberline and Royal Sovereign as their go-to shingle lines. We’ve taken apart enough of those roofs to know exactly how they were installed, where the shortcuts got taken, and what fails first when the clay starts moving underneath. Tom Barrett learned the trade at Los Angeles Trade-Technical College and has been running crews long enough to know that the job never lies – so when we see a GAF roof in Frisco with under-driven nails or missing starter strips, we tell you, and we show you photos before we touch anything. We’re an independent GAF service provider, not a manufacturer-affiliated installer, which means our loyalty runs to the homeowner, not to a factory rep. We also offer our Kitchen Remodeling in Frisco for homeowners looking to update more than their roof.

Common GAF Construction Problems We Solve in Frisco

Here’s what actually goes wrong on GAF roofs in this part of Collin County:

  • Wind-lifted Timberline shingle tabs and broken seal strips. Frisco sits in a wind pattern that produces microbursts in spring and fall, and the seal strips on Timberline HDZ can let go when a gust gets under the tab. We see exposed nail lines most often on south-facing planes where the sun has been baking the adhesive since the house was built.
  • Hail bruising and granule loss on west-facing slopes. Collin County hail storms tend to move west to east, which means most GAF shingle damage concentrates on the west and southwest roof planes. When shingles are knocked loose, the WeatherWatch underlayment underneath gets exposed and starts delaminating within weeks.
  • Premature sealant degradation on Royal Sovereign 3-tab. The self-adhesive strip on Royal Sovereign doesn’t hold up to extended triple-digit summer heat as well as the newer Timberline sealant chemistry. On 15-to-20-year-old Frisco homes, we regularly find 3-tab shingles that simply un-adhered themselves over three or four summers, and the next wind event does the rest.
  • Clay-driven deck movement transferring through StormGuard valleys. Blackland Prairie soil swells in wet springs and contracts in drought, and that movement doesn’t stop at the foundation. It travels up through the framing and can open gaps at GAF pipe boots and valley transitions, creating slow leaks that only show up months later as a brown stain on the ceiling.
  • Under-nailed GAF roofs from early-2000s production builds. A large share of Frisco homes built during the first master-planned wave went up under a lower wind-uplift code than Frisco now enforces. We’ll get into that more below, because it changes how every re-roof needs to be spec’d.

GAF Service in Frisco: What Local Conditions Mean for Your Equipment

Here’s the part most GAF pages won’t tell you, because most of them aren’t written by people who actually work in Frisco. The city sits entirely within Collin County’s Windstorm Exposure Category C for roof design, but the early-2000s master-planned communities were built to the lower Category A standard. That means a large share of still-young GAF roofs in Frisco are under-nailed and under-sealed for the code the city now enforces on any re-roof. When you file for a permit in Frisco, the Building Inspections department – which is known across the DFW trade community for strict, consistent enforcement – will require full decking and fastener upgrades on simple replacements. So a homeowner who just wants to swap out hail-damaged Timberline shingles is often looking at an entire nailing-pattern upgrade before the inspector signs off. That’s not the homeowner’s fault and it’s not a contractor padding the bill. It’s the gap between how Frisco was built and how Frisco is now required to be built. We know exactly which subdivisions ran Category A and which ran Category B, and we spec the re-roof accordingly the first time.

Our crew was called to a home in the Plantation Resort subdivision off Legacy Drive after a spring hailstorm tore through the Timberline HDZ on the west-facing slope. The GAF WeatherWatch underlayment had delaminated at the ridge, and the homeowner had a pending HOA architectural review for the re-roof. We pulled the HOA submittal together in two days, upgraded the entire deck to meet Frisco’s new wind uplift nailing schedule, and reinstalled Timberline UHDZ with StormGuard valley metal before the next clay-heave cycle locked the deck movement back in.

GAF Models & Products We Service in Frisco

We work on the full GAF residential lineup you’ll find across Frisco’s 75033, 75034, and 75035 ZIP codes: Timberline HDZ and Timberline UHDZ architectural shingles, Royal Sovereign 3-tab shingles, Timberline ArmorShield II impact-resistant shingles, and EverGuard PVC and TPO membranes on flat commercial sections. When we’re extending the life of a GAF roof, we default to GAF-certified accessories like Pro-Start starter strips, Seal-A-Ridge caps, and Cobra ridge vents. For isolated shingle or flashing repairs after a storm, we’ll install code-compliant aftermarket equivalents if the GAF part is backordered – and we’ll tell you when a 15-year-old GAF roof on Blackland clay has too many compromised planes to justify anything short of full replacement. See our GAF sales & service page for the full scope of what we handle.

GAF Service Pricing in Frisco

Here’s what you can expect to pay for GAF work in Frisco, based on current market rates for Collin County:

Service Typical Price Range
Roof Replacement $8,000 - $20,000
Roof Repair $400 - $1,800
Metal Roof Installation $15,000 - $40,000
Tile Roof Repair $600 - $2,500

What drives the cost in Frisco specifically is the permit path. If your re-roof requires a fastener upgrade to meet the current wind-uplift code, that adds material and labor to what would otherwise be a straightforward shingle swap. We write every scope, every allowance, and every price change in a change order before any work happens, so the number on your estimate is the number on your final invoice. Call (877) 610-1318 for an exact quote – estimates are free, and we’ll walk the roof with you so you see what we see. Ask us about our Bathroom Remodeling in Frisco while we’re there.

Serving Frisco, TX - Our Local Coverage Area

We’re based in the Frisco area and know this community well, from Plano Gaf service to local neighborhoods. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - GAF Construction in Frisco

Service Areas Near Frisco

Our crews cover all of Frisco’s 75033, 75034, and 75035 ZIP codes, plus the surrounding Collin County communities that share the same Blackland Prairie clay and wind-exposure codes. We regularly work in Plano, McKinney, Allen, and Little Elm. If you’re in McKinney, see GAF service in McKinney for local detail. Out west, we also serve the Amarillo market – that’s covered on GAF service in Amarillo. For everything else within our broader footprint, the Frisco service area page has the full list.

Book Your GAF Service in Frisco Today

If your GAF roof is losing shingles, showing hail bruises, or just getting old enough that the inspector’s requirements are going to complicate things, let’s get ahead of it. Call (877) 610-1318 and a live person will answer – not a voicemail box, not an out-of-state call center. We’ll schedule your free estimate, and we’ll do it right the first time, or we’ll come back and make it right.

Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Frisco since 1998.

Need Construction help in Frisco? Licensed & insured · Free written quotes response · free estimates
Call (877) 610-1318
Areas We Serve

Request a Free Estimate in Frisco

Tell us what you need - Barrett & Sons Construction responds fast. No obligation.

By requesting your free estimate, you accept our Privacy Policy and consent to receive communications through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch