Dvele Construction in Santa Clarita, CA

Dvele Construction in Santa Clarita, CA | Barrett & Sons Construction

We provide independent Dvele construction, repair, and envelope rework across Santa Clarita’s four ZIP codes: 91380, 91382, 91383, and 91390. We’re not a factory-authorized dealer, but we’ve rebuilt enough Dvele wall and roof assemblies in this valley to know exactly where the factory details hold and where they don’t. The short version: if you own a Dvele in Valencia, Saugus, Canyon Country, or Newhall, call (877) 610-1318 and we’ll come take a look. Estimates are free, and Tom Barrett puts his name on every job we do.

Call (877) 610-1318

Why Santa Clarita Residents Choose Us for Dvele Service

We’ve been cutting open high-performance envelopes in Santa Clarita long enough that we don’t guess at them. Dvele homes are built around continuous insulation, rigid air-sealing, and factory-tight tolerances. Most general contractors in this valley have never detailed an EPS foam-to-window-buck junction. We have, repeatedly, on real homes in Valencia and Saugus. And when the manufacturer’s details fail under Santa Clarita’s 105°F afternoons or a Santa Ana-driven ember storm, we know the repair sequence without needing to call a factory rep for direction.

We’re Dvele sales & service specialists on a repair basis, not on a sales contract. That distinction matters. We’re not trying to sell you a new home, so we’ll tell you honestly when a localized repair beats a replacement. For older 100 Series homes with cladding delamination, we often recommend replacing only the affected EPS panels, provided the underlying weather-resistive barrier is intact. That’s the kind of judgement call you get from a crew that’s actually done the work.

Tom Barrett grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough field hours to know that the job never lies. He’s been building and remodeling across Los Angeles for the better part of two decades, and his sons run the Barrett & Sons crews. Calls get answered by a live person, not a voicemail box or an out-of-state call center.

Common Dvele Construction Problems We Solve in Santa Clarita

• EPS foam cladding delamination on south- and west-facing walls. Santa Clarita’s summer heat is relentless, with afternoon temperatures routinely above 105°F. The EPS foam panels on Dvele exteriors expand and contract through 30°F daily swings, and over several years they can shrink back from window bucks by close to half an inch. You’ll see visible gaps at the window corners, and the thermal envelope opens right there. We’ve fixed exactly this on 200 Series homes in Valencia.
• Cracking in the continuous concrete floor slab at interior duct chases. Dvele’s thin-shell radiant zones flex with the valley’s diurnal temperature swing. Hairline cracks at duct chases are where we see it first. It’s rarely structural, but it needs to be mapped and sealed before moisture finds a path. We inspect, document, and repair with the right fillers for radiant-heated slabs.
• Ember intrusion through the roof-to-wall flashing on low-slope sections. Santa Ana winds funnel through the Newhall Pass and push embers into places flatland LA contractors never consider. Dvele’s proprietary flashing on low-slope parapet sections can char the weather-resistive barrier behind the caps. This is the single most dangerous failure mode for a Dvele in the SCV, and it’s the first thing we check after a wind event.
• Fogging between factory-installed triple-pane glazing units. Santa Clarita gets far more sustained high-UV exposure than the LA Basin coast. Years of it causes seal degradation and fogging in the Dvele triple-pane units, which most coastal homes don’t see. We do glazing replacements and coordinate with suppliers who can match the factory specs.
• Air-sealing tape failures at panel joints. The ZIP-system tapes and gaskets Dvele relies on can fail where the panels were field-spliced, especially when the original install crew was rushed. You won’t see this from the ground. You’ll notice it in the power bill or a musty smell at the corner of a room. We air-test the zone and re-tape what’s failed.

Dvele Service in Santa Clarita: What Local Conditions Mean for Your Home

Here’s something that doesn’t show up in the Dvele brochure: Dvele’s factory-built panels arrive in flatbed-sized sections that have to be craned over Santa Clarita’s HOA-maintained paseo easements. Those are the pedestrian greenbelts threading behind Valencia and Saugus lots. A project that looks perfectly deliverable on a standard assessor map can be dead on arrival once the paseo easement boundary is plotted, because the crane needs neighbor access and sometimes a temporary construction easement before the city will even accept the permit application. We’ve watched out-of-area contractors get sent back to the drawing board over this. It’s not a design problem. It’s a logistics problem that only local crews who know the paseo network see coming. For Santa Clarita service area work, we plan the crane path and the neighbor access before we order the first panel.

And once the panels are on site, the valley does its own thing. The 10-15°F hotter summers compress cure windows. The near-freezing winter nights stiffen sealants. The Santa Ana winds load the roof edges in ways the energy models assume but local crews have to field-verify. Our crew spent three days on a 200 Series home off McBean Parkway in Valencia replacing south-facing EPS panels that had shrunk back from the window bucks by nearly a half-inch, opening the wall to inspect the WRB. We recut and re-taped the ZIP system seams, reset the foam with low-modulus adhesive, and flashed the openings with Dvele’s original sealant before reinstalling the fiber-cement rainscreen, then air-tested the zone back to 0.8 ACH50.

Dvele Models & Products We Service in Santa Clarita

We work on the full Dvele line: the 100 Series, the 200 Series, the 300 Series, and the Dvele Accessory Dwelling Unit. That covers everything from early 100 Series homes in the older Newhall core to newer 300 Series builds in Valencia’s master-planned neighborhoods.

For envelope-critical components like EPS panels, tapes, and gaskets, we default to Dvele-spec materials. Preserving the passive-house performance matters, and aftermarket foam board isn’t the same product. We’re also honest with you: some trim and finish hardware can be sourced as equal-quality aftermarket when OEM lead times stall a remodel. If a Valencia kitchen addition is waiting on a Dvele factory backorder for six weeks, we’ll bring you options that match and tell you exactly what you’re trading.

Within the home, our crews do full kitchen remodeling, roof replacement and installation, and full bathroom remodeling inside Dvele envelopes, often as part of the same repair scope.

Dvele Service Pricing in Santa Clarita

FAQs - Dvele Construction in Santa Clarita

Service Areas Near Santa Clarita

We handle Dvele construction and envelope work across the Santa Clarita Valley and into surrounding cities. That includes our neighbors in Dvele service in Oxnard to the west and Dvele service in Rancho Cucamonga to the east. We also take Dvele repair calls from Los Angeles, San Diego, San Jose, San Francisco, Fresno, and Paramount when the job is substantial enough to justify the trip.

Book Your Dvele Service in Santa Clarita Today

Your Dvele was built to a higher standard. Keep it there. Call (877) 610-1318 and you’ll get Tom or one of his sons on the line, not a call center. We’ll schedule a free estimate, answer honestly about what needs fixing and what doesn’t, and put every number in writing. We’ll do it right the first time, or we’ll come back and make it right.

Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Santa Clarita since 1998.