Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterCover Construction in Fort Lauderdale, CA | Barrett & Sons Construction
We provide independent Cover cabinet and millwork service across Fort Lauderdale, from Victoria Park to the finger islands off Las Olas. We’re not a manufacturer affiliate, and we’ve never claimed to be. What we are is the crew that fixes Cover installations when Fort Lauderdale’s salt air, humidity, and hurricane codes get to them first. If you’re staring at peeling thermofoil or swollen cabinet boxes, call (877) 610-1318 for a straight answer and a free estimate.
Barrett & Sons Construction has been owner-operated since 1998, with Tom Barrett and his sons on job sites most days. We know Cover’s model lines, their weak points, and what it takes to make them hold up in a coastal climate that punishes shortcuts. That’s the difference between a crew that has done this work in Fort Lauderdale and one reading the instructions for the first time.
Why Fort Lauderdale Residents Choose Us for Cover Service
Tom Barrett grew up in the San Fernando Valley, where his dad took him to watch crews pour foundations on weekends. He trained at Los Angeles Trade-Technical College and has spent the better part of two decades building and remodeling homes across Los Angeles and South Florida. When you call about a Cover cabinet problem, you’re talking to someone who has pulled the drawer out, looked at the hinge, and fixed it himself.
We work on Cover homes throughout Fort Lauderdale’s concrete-block housing stock. That hands-on familiarity matters because most national outfits have never dealt with a cabinet door that swelled from tidal humidity in a 1963 ranch on a finger island. We have. We keep OEM components where the finish has to match, and we switch to marine-grade stainless hardware where Fort Lauderdale conditions demand it. If you’re looking for Cover sales & service from a crew that actually knows the product, you’ve found it.
Every job comes with the 90-Day Done Right Promise in writing. If it’s not done right, Tom comes back and makes it right. One call.
Common Cover Construction Problems We Solve in Fort Lauderdale
- Thermofoil delamination in garages and utility rooms. Cover’s thermofoil doors look sharp when they go in, but Fort Lauderdale’s year-round humidity and salt-laden air work their way into non-HVAC spaces and the laminate starts peeling at the edges. We see this constantly in Victoria Park and Coral Ridge homes where garage cabinets never catch a break from the dew point.
- Corroded hinges and glides on canal-front homes. Salt spray travels farther than people think, especially through louvered doors and open-air loggias. Standard Cover hardware rusts prematurely anywhere within a few hundred feet of tidal water. We swap in stainless steel hinges and glides rated for coastal exposure.
- Swollen particleboard boxes around dishwashers and sinks. The 1950s-to-1970s concrete block homes that dominate Fort Lauderdale’s core neighborhoods have aging plumbing. A slow dishwasher leak soaks into the particleboard cabinet box, and once it swells, the structural integrity is gone. We see this in Tarpon River and the finger islands more than anywhere else.
- Peeling melamine edgebanding in poorly ventilated kitchens. Fort Lauderdale’s dew-point conditions mean kitchens without proper cross-ventilation trap moisture against cabinet edges. Edgebanding peels. We repair what’s repairable and tell you straight when it’s not.
- Cabinet boxes compromised by salt-air corrosion of fasteners. Lintels, rebar, and cabinet fasteners all corrode faster here than in Plantation or Weston. When structural screws inside a Cover cabinet box start to crumble, the cabinet loses its racking resistance. That’s a repair we handle before it becomes a collapse.
Cover Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the thing nobody tells you about Cover cabinets in Fort Lauderdale. This is the only city in Broward County where entire residential neighborhoods, like the finger islands off Las Olas and the canals of Coral Ridge, sit within a few hundred feet of tidal water on all sides. That means continuous salt-air exposure. Interior designers in Plantation or Weston simply never have to design around what kitchen remodeling in Fort Lauderdale on Isle of Venice Drive deals with every single day. Salt in the air gets into drawer glides. It settles on hinges. It works into the microscopic seams of edgebanding and accelerates what humidity already started. Our crews specify stainless fasteners and marine-grade hardware on any canal-front Cover installation because the standard zinc-plated components Cover ships will not survive. That is not marketing. It is what we replace every month.
Just last month our crew was called to a 1963 concrete-block ranch on a finger island off Isle of Venice Drive in Fort Lauderdale. The homeowner had a full Cover Luna kitchen installed in 2019, but every lower cabinet door under the sink and beside the dishwasher had swollen at the bottom edge and the thermofoil was peeling. We removed the affected door and drawer fronts, confirmed the boxes were still square, and replaced the fronts with marine-grade HDF panels refinished to match the original Luna gloss, swapping all hinges for stainless steel. We also added a passive vent behind the toe-kick to break the humidity pocket. The kitchen is fully functional again, and the owner didn’t have to rip out a $15,000 cabinet run. That’s what local knowledge buys you.
Cover Models & Products We Service in Fort Lauderdale
We service the full Cover residential lineup: the Luna Series, Urban Series, Plus Series, and Classic Series. For doors, drawer fronts, and proprietary hardware, we use Cover OEM components because the finish and fit have to match. For hinges, glides, and fasteners on canal-front and ground-floor installations, we switch to marine-grade or stainless aftermarket parts. The goal is simple: keep your Cover cabinets looking like Cover cabinets while making the hardware survive Fort Lauderdale. We stock common OEM fronts and stainless hardware locally so the turnaround on most Fort Lauderdale repairs doesn’t drag out.
Cover Service Pricing in Fort Lauderdale
Here’s what Cover cabinet work typically runs in Fort Lauderdale. These are the ranges we quote from, and they include labor and standard materials. Permits are separate and only apply where the scope requires them.
| Service | Price Range |
|---|---|
| Cover cabinet door/drawer front replacement (per opening) | $120-$350 |
| Cover cabinet box repair and moisture sealing | $250-$800 |
| Cabinet Installation | $4,000-$13,000 |
| Cabinet Refacing | $3,500-$9,000 |
| Kitchen Island Installation | $3,000-$10,000 |
What drives the cost is the extent of the damage and whether we’re repairing fronts or replacing boxes. A free estimate from us includes a line-by-line scope in writing, so you know exactly what you’re paying for before we touch anything. Call (877) 610-1318 for an exact quote. Estimates are free, and there’s no trip charge inside the county.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Cover Construction in Fort Lauderdale
HVHZ code governs wind loads and structural connections, not cabinet boxes themselves, but it matters when your bathroom remodeling in Fort Lauderdale includes new openings, windows, or wall changes. Any permitted work triggers wind-mitigation review, and in many of Fort Lauderdale’s older concrete-block homes, that means adding hurricane strapping or impact-rated openings alongside the cabinet work. We pull permits on every eligible job and walk you through what the inspector will look for. Call (877) 610-1318 to talk through your specific scope.
Yes. We use OEM Cover Luna fronts where the finish has to match exactly, and for custom matches we refinish marine-grade HDF panels to the original gloss specification. The key is having the original door or drawer front to match against, which is why we ask you not to throw out damaged pieces until we’ve looked at them.
Because salt spray travels hundreds of feet inland from tidal water, and zinc-plated hinges are not built for that environment. On canal-front lots in Coral Ridge and the finger islands, we replace standard Cover hinges with stainless steel as a matter of course. The original hardware simply will not hold up within sight of the Intracoastal. Call (877) 610-1318 if your hinges are already showing rust; we can quote the swap before the corrosion spreads.
It depends on how far the swelling has gone. If the particleboard is damp but still square, we can dry it, seal it, and reinforce the joints; that repair runs $250 to $800. If the box has lost its structural integrity or the bottom panel is crumbling, replacement is the honest answer. We’ll tell you which one you’re looking at and put it in writing. Call (877) 610-1318 for a free assessment.
Replacing cabinet fronts and hardware is cosmetic and does not require a permit. However, if you are changing plumbing, electrical, or any structural element as part of the cabinet work, the scope crosses into permit territory. We handle that decision on a job-by-job basis and pull permits on every eligible scope, then stand with you through the Broward County inspection.
Service Areas Near Fort Lauderdale
We serve Fort Lauderdale and the surrounding communities across Broward County. That includes Pompano Beach, Hollywood, Dania Beach, Oakland Park, and the inland neighborhoods where we do a lot of Cover work as well. If you’re just outside Fort Lauderdale, we also provide Fort Lauderdale service area coverage and frequently take calls from Cover service in West Palm Beach and Cover service in Hialeah. If you’re not sure we cover your street, call (877) 610-1318 and ask. A live person answers.
Book Your Cover Service in Fort Lauderdale Today
If your Cover cabinets are peeling, swelling, or rusting in Fort Lauderdale, don’t wait until the damage spreads. Call (877) 610-1318 today to schedule a free estimate. Tom Barrett and his sons will take a look, tell you what needs fixing, and put the price in writing before anything moves.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Fort Lauderdale since 1998.