Cambria Driveway & Pavers Nationwide | Barrett & Sons Construction

Cambria Driveway & Pavers: The Los Angeles Owner’s Guide

We stock and install Cambria-compatible driveway pavers and hardscape components throughout Los Angeles, with typical installed work running $8,260 to $21,240 depending on the area, access, and how much of the existing base needs rebuilding. Most owners discover a failing paver or driveway section the slow way: a corner sinks after a winter rain, a crack traces out from a sprinkler head, or a paver pops loose and the sand underneath is gone. By the time you notice it underfoot, water has usually been working on the base for a season or two. That’s the part you don’t see until it’s already done its damage.

Call (877) 610-1318

Which Cambria Models This Applies To

Cambria’s outdoor line in Southern California runs through their paver and slab collections, and the compatibility question matters more than most people expect. We’ve seen three different paver thicknesses on Los Angeles driveways in the same neighborhood: 60mm, 80mm, and load-rated 100mm slabs for heavier vehicles. The wrong replacement locks you into either a paver that sits proud of the rest of the surface or one that sinks because the base was never spec’d for it. The gotcha we run into most often is color-batch matching. Cambria, like most premium manufacturers, pulls from different production runs, and a paver replaced three years later will not match the sun-faded originals perfectly. We solve this by pulling existing pavers from an inconspicuous corner, setting the new ones there, and placing the salvaged pavers in the visible repair area. Nobody sees it; everybody’s happy. Is that worth the trouble? If you care about the look of your drive, yes.

Barrett & Sons Construction is an independent contractor. We install and replace Cambria hardscape materials, but we don’t claim any affiliation with the manufacturer. You’re getting our workmanship and their material, each standing on its own.

Signs Your Cambria Driveway & Pavers Is Failing

• Sunken paver near a tree line or sprinkler valve. Los Angeles soil expands and contracts with irrigation cycles, and when fine base material washes away, a single paver drops first. If one paver sits lower than its neighbors by more than a quarter inch, the base under it is no longer supporting it.
• Weed growth pushing through the joints that keeps coming back. Weeds don’t grow through paver joints that are tight, properly sanded, and sealed. Persistent growth tells you the joint sand has thinned enough for roots to reach daylight, and the weed is a symptom, not the cause.
• Cracking that follows a straight line across three or more pavers. Pavers don’t crack in lines on their own. A running crack almost always points to a concrete sub-base or deep compacted layer that has shifted, and replacing only the cracked pavers without addressing what’s underneath just buys you a year.
• White, chalky residue on the surface that keeps coming back. Efflorescence is salt and mineral movement through the paver, and in Los Angeles, paired with hard water from irrigation overspray, it’s a sign the sealer has broken down. Replacing a paver and ignoring the failed sealer sentence the new one to the same fate.
• Sanding between pavers gone after a pressure washing or a heavy rain. Joint sand is the glue holding the surface together laterally. When it’s gone, pavers start shifting under the weight of a car tire, and the easiest repair gets twice as expensive because now you’re not just re-sanding, you’re re-leveling.

Replacement Cost & What’s Included

Cambria driveway paver replacement in Los Angeles typically runs $8,260 to $21,240 installed, and the spread comes down to three things: how many pavers need replacing, whether the base beneath them is still sound, and how much hand-removal labor is required to match the existing pattern. A small repair of twenty or thirty pavers with a sound base lands near the low end. A full driveway replacement with excavation, new base, and complete reinstallation sits at the high end.

Every quote we write for Cambria hardscape work in Los Angeles includes the materials, removal and disposal of the failed section, base repair if needed, installation, joint sand, and a written price before any work begins. No allowances that drift. No verbal estimates at the door. If the scope changes on-site, you get a written change order with a firm price before a single paver moves. The work carries the 90-Day Done Right Promise: if it’s not done right the first time, Tom Barrett comes back and makes it right, one call.

For full paver driveway installation, the range is $8,260 to $21,240. For smaller repairs and isolated section replacement, we price the job by the square foot, the pavers, and the base condition, and we’ll show you the line items.

DIY or Call Us?

Cambria pavers are not dangerous to handle the way, say, a garage door spring is. You can lift one out of the ground without risking your hand. The risk is in what you assume. If a Los Angeles homeowner pulls up a sunken paver, adds some sand, and sets it back down, the repair looks fine for six months, then the first rain collapses it again because the real problem was a six-inch-deep void in the base and no amount of surface sand fixes that. What you can safely check yourself is the joint sand: if it’s gone, note it. What you shouldn’t do is excavate a section of driveway on a guess, because once the base is disturbed, you’ve committed to redoing it correctly, and a half-rebuilt base fails faster than the original problem. If you want an honest look at what’s actually going on under your pavers, call us at (877) 610-1318 and we’ll come take a look. We don’t charge a trip fee inside the county.

FAQs

How long do Cambria driveway pavers last in Los Angeles?
In Los Angeles’s dry climate with proper base and sealing, Cambria pavers typically last 25 to 40 years before the surface itself fails, though Los Angeles’s irrigation-cycle soil shifts mean the base usually needs attention first, often in the 15 to 20 year range. Call (877) 610-1318 for an honest assessment of what’s actually aging under your driveway.

Can a single cracked Cambria paver be repaired instead of replaced?
In most cases you replace the damaged paver, not repair it, because a cracked stone paver carries a fracture line that will spall and separate under traffic, and no amount of filler bonds the material back to its load-bearing strength. Call (877) 610-1318 and we’ll match the replacement to the rest of the driveway.

How long does a Cambria driveway paver replacement take in Los Angeles?
Isolated repairs replacing up to 40 or 50 pavers with a healthy base typically take one to two working days, while a full driveway section with excavation and base rebuild usually runs three to five working days depending on the size. Call (877) 610-1318 for a written timeline before we start.

Do you stock Cambria driveway pavers, or do you have to order them?
We keep common Cambria paver sizes and colors on hand and maintain direct relationships with Southern California Cambria suppliers for special-order sizes and less common color batches, so most jobs start within days rather than weeks. Call (877) 610-1318 with your paver dimensions and we’ll check stock while you’re on the phone. We’ll do it right the first time, or we’ll come back and make it right.

Written by Tom Barrett, Owner, Barrett & Sons Construction at Barrett & Sons Construction, serving Los Angeles and nearby areas.